ignition Hyundai Santa Fe 2015 Quick Reference Guide

Page 20 of 20

FEATURES AND CONTROLS
36
HYUNDAI
BEFORE DELIVERY☐CONFIRM “GOOD BATTERY” USING GR8 AND STAPLE
TEST TICKET HERE☐ SET TIRE PRESURE LF RF RR LR ☐VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,
FREE OF CHIPS AND SCRATCHES · CLEAN WINDSHIELD
AND BACK WINDOW☐ENSURE FLOORMATS ARE SNAPPED INTO PLACE
ACTIVE ECO SYSTEMAC 115V PLUG
1. Dashboard button must be switched on
to use cargo area AC115V plug. Engine
should be running when
AC 115V plug is in use.
2. Rotate safety plate
A on outlet for use.
REARVIEW CAMERABLIND SPOT DETECTION SYSTEM (BSD)
Type B and Navigation radioThe rearview camera will activate when
the ignition switch is ON and the shift
lever is in the R (Reverse) position.
The BSD system sensor senses the
rear side territory of the vehicle and
provides information to the driver.
Press the BSD switch. If vehicle speed
exceeds 9.3mph the system will activate.
Press the switch again to deactivate the
system.Blind spot detection (BSD)Warning range is dependent on your
vehicle speed. However, if your vehicle
speed differences is 9.3mph above
other vehicles, the warning is not active.Lane change assist (LCA)When the vehicle is approaching at
high speed, the warning is not active.Rear cross-traffic alert (RCTA)When your vehicle moves (below 6mph)
in Reverse, the sensor detects the
approaching vehicles and the warning is
active.
Rearview display
Key Websites: - Hyundai website - www.hyundai.com
- Hyundai owner website - www.myhyundai.com
- Bluetooth phone compatibility - www.hyundaiusa.com/bluetooth
- Blue Link - www.MyHyundai.com
A
SANTA FE CUSTOMER DELIVERY CHECK LIST
HYUNDAI OWNER DEALERSHIP NAMESALES CONSULTANT DATEVIN PREVIOUS VEHICLE Sales Consultant Date Sales Manager Date
Customer Date
Email
@
SANTA FE
37
Active ECO systemActive ECO system helps to improve fuel
efficiency. When the Active ECO system is
activated, the vehicle acceleration, gear shift
points and air conditioning performance will
be reduced to conserve the fuel
consumption.
Press the Active ECO button to activate.
The LED on the button and the ECO
indicator in the instrument cluster will
illuminate.
To improve your fuel efficiency:t%SJWFTNPPUIMZBOEBDDFMFSBUFBUBNPEFSBUFSBUF
t"WPJEIFBWZBDDFMFSBUJPOT
t.BJOUBJOTUFBEZDSVJTJOHTQFFE
t"EKVTUUIFWFIJDMFTQFFEUPUIFUSBGmDDPOEJUJPOBOEBWPJETQFFE
changes.
t"WPJEVOOFDFTTBSZCSBLJOH
t,FFQUIFUJSFTJOnBUFEUPUIFSFDPNNFOEFEUJSFQSFTTVSF
t%POUJEMFUIFFOHJOFMPOHFSUIBOOFDFTTBSZActive ECO on – For optimal fuel efficiency
Active ECO off – For optimal performance and drivability.