lock HYUNDAI SANTA FE HYBRID 2022 Owners Manual

1
Guide To Hyundai Genuine Parts ...................................................................... 1-3
HEV (Hybrid Electric Vehicle) System .............................................................. 1-8
PHEV (Plug-in Hybrid Electric Vehicle) System ............................................... 1-9
Charging The Plug-In Hybrid Vehicle ............................................................. 1-10Charging Information .................................................................................................. 1-10
Charging Time ............................................................................................................. 1-10
Charging Types ............................................................................................................. 1-11
Charging Status ........................................................................................................... 1-12
Scheduled Charging.................................................................................................... 1-13Charging Connector Lock ........................................................................................... 1-14
Charging Precautions ................................................................................................. 1-15
Ac Charge .................................................................................................................... 1 -16
Trickle Charge .............................................................................................................. 1-21
Driving The Hybrid Vehicle .............................................................................. 1-33 Starting The Vehicle ....................................................................................................1-33
Special Features ..........................................................................................................1-33
Hybrid System Gauge .................................................................................................1-35
Plug-In Hybrid Mode (Plug-in Hybrid Vehicle) ......................................................... 1-36
Aux. Battery Saver+ (Plug-in Hybrid Vehicle) ............................................................ 1-37
Warning And Indicator Lights .................................................................................... 1-39
LCD Display Messages ............................................................................................... 1-40
Energy Flow ................................................................................................................ 1-48
Safety Precautions for Hybrid System .............................................................1-51 Hybrid Vehicle Components ...................................................................................... 1-51
Service Interlock Connector ...................................................................................... 1-53
Hybrid Battery Cooling Duct ..................................................................................... 1-53
If an Accident Occurs ................................................................................................. 1-54
When the Hybrid Vehicle Shuts Off .......................................................................... 1-55
1. Foreword / Hybrid System
Overview

Foreword / Hybrid System Overview
1-14
Charging Connector Lock
OAEEQ019085R
You may select when the charging
connector can be locked and unlocked in
the charging inlet.
The driver can select the charge
connector lock mode from the User
Settings in the LCD display by selecting

8VHU6HWWLQJV
Ÿ&RQYHQLHQFH
Ÿ/RFNLQJ
Charging Cable'.
When the Charging Connector is
Locked
While
charging Always Do not
lock (if
equipped)
Before
charging XO X
While
charging OO X
Finished
charging XO X
Always mode
The connector locks when the charging
connector is plugged into the charging
inlet. The connector is locked until all
doors are unlocked by the driver. This
mode can be used to prevent charging
cable theft.
[
If the charging connector is unlocked
when all doors are unlocked, but the
charging cable is not disconnected
within 15 seconds, the connector will
be automatically locked again.

[ If the charging connector is unlocked
when all doors are unlocked, but all
doors are locked again, immediately,
the connector will be automatically
locked again.
While charging mode
The connector locks when charging
starts. The connector unlocks when
charging is complete. This mode can be
used when charging in a public charging
station.
Do not lock mode (if equipped)
The connector unlocks regardless of the
state of charging.
Press the charging connector release
button, disconnect the connector.
Be careful to theft of the charging cable.

01
1-17
4. Check if there is dust on the charging
connector and charging inlet.
OTMPHQ010006L
5. Hold the charging connector handle and connect it to the vehicle AC
charging inlet. Push the connector
until you hear a "clicking" sound. If
the charging connector and charging
terminal are not connected properly,
this may cause a fire.
Information
Charging connector AUTO/LOCK mode
The charging connector is locked in the
inlet at a different period according to which mode is selected.
[ LOCK mode : The connector locks
when the charging connector is plugged into the charging inlet.

[ AUTO mode : The connector locks when charging starts.
For more details, refer to “Charging
Connector AUTO/ LOCK Mode” in this
chapter.
„AC Charger
OLFP0Q5007K
6. Connect the charging plug to the electric outlet at a AC charging station
to start charging.
„Type A „Type B
OTMPHQ010007LOTMPHQ010008L
7. Check if the charging indicator light of the high voltage battery
on the instrument cluster is turned
ON. Charging is not done when the
charging indicator lamp is OFF.
When the charging connector and
charging plug are not connected
properly, reconnect the charging
cable to charge.

Foreword / Hybrid System Overview
1-18
Information

[ Even though charging is possible with
the ignition switch in the ON/START
position, for your safety, start charging when the ignition switch is in the
LOCK/OFF position and the vehicle
shifted to P (Park). After charging has started, you can use electrical components such as the radio by
placing the ignition switch in the ACC
or ON position.

[ During AC charging, the radio
reception may be bad.

[ Moving the shift lever from P (Park) to R (Reverse)/N(Neutral)/D (Drive) stops
the charging process.
To restart the charging process, move
the shift lever to P (Park), place the
ignition switch to the LOCK/OFF position, and disconnect the charging
cable. Then, connect the charging cable.
OAEPHQ049818L
8. After charging has started, the estimated charging time is displayed
on the instrument cluster for about 1
minute.
If you open the driver seat door while
charging, the estimated charging time
is also displayed on the instrument
cluster for about 1 minute.
When scheduled charging is set, the
estimated charging time is displayed
as “--" .
Information
Depending on the condition and durability
of the high voltage battery, charger
specifications, and ambient temperature,
the time required for charging the battery
may vary.
Checking Charging Status
OTMPHQ010003L
When charging the high voltage battery,
the charge level can be checked from
outside the vehicle.

Foreword / Hybrid System Overview
1-20
How to Disconnect AC Charger
„AC Charger
OLFP0Q5007K
1. When charging is complete, remove the charging plug from the electrical
outlet of the AC charging station.
OTMPHQ010009L
2. Hold the charging connector handle and pull it while pressing the release
button.
Information
To prevent charging cable theft,
the charging connector cannot be
disconnected from the inlet when the
doors are locked. Unlock all doors to
disconnect the charging connector from the inlet.
However, if the vehicle is in the charging
connector AUTO mode, the charging
connector automatically unlocks from the inlet when charging is completed.
For more details, refer to “Charging
Connector AUTO/ LOCK Mode” in this
chapter.
OTMPHQ010010L
3. Make sure to completely close the charging door.

à The charging door dose not have a
locking system.

01
1-21
Unlock Charging Connector in
Emergency
OTMPHQ010011L
If the charging connector does not
disconnect due to battery discharge and
failure of the electric wires, open the
hood and slightly pull the emergency
cable. The charging connector will then disconnect.
Trickle Charge
„Portable Charger
OAEEQ016042N
(1) Code and Plug (Code set)
(2) Control Box
(3) Charging Cable and Charging Connector
Trickle charge can be used when
AC charge is not available by using
household electricity.
How to set the charge level of the
portable charger
PlugPlug Electric OutletElectric Outlet
OLFP0Q5020K
1. Check the rated current of the electric outlet prior to connecting the plug to
the outlet.
2. Connect the plug to a household electric outlet.
3. Check the display window on the control box.

Foreword / Hybrid System Overview
1-24
Information
Charging connector AUTO/LOCK mode
The charging connector is locked in the
inlet at a different period according to which mode is selected.
[ LOCK mode : The connector locks
when the charging connector is plugged into the charging inlet.

[ AUTO mode : The connector locks when charging starts.
For more details, refer to “Charging
Connector AUTO/ LOCK Mode” in this
chapter.
OOSEVQ018057
8. Charging starts automatically (charging lamp blinks).
„Type A „Type B
OTMPHQ010007LOTMPHQ010008L
9. Check if the charging indicator light of the high voltage battery
on the instrument cluster is turned
ON. Charging is not done when the
charging indicator lamp is OFF.
When the charging connector is not
connected properly, reconnect the
charging cable to charge it again.
Information

[ Even though charging is possible with
the ignition switch in the ON/START
position, for your safety, start charging when the ignition switch is in the
LOCK/OFF position and the vehicle
shifted to P (Park).
After charging has started, you can use electrical components such as the radio
by placing the ignition switch in ACC
or ON position.

[ Moving the shift lever from P (Park) to R (Reverse)/N(Neutral)/D (Drive) stops
the charging process.
To restart the charging process, move
the shift lever to P (Park), place the
ignition switch to the LOCK/OFF position, and disconnect the charging
cable. Then, connect the charging cable.

01
1-31
How to Disconnect Portable Charger
(ICCB: In-Cable Control Box)
OTMPHQ010009L
1. Hold the charging connector handle and pull it while pressing the release
button.
Information
To prevent charging cable theft,
the charging connector cannot be
disconnected from the inlet when the
doors are locked. Unlock all doors to
disconnect the charging connector from the inlet.
However, if the vehicle is in the charging
connector AUTO mode, the charging
connector automatically unlocks from the inlet when charging is completed.
For more details, refer to “Charging
Connector AUTO/ LOCK Mode” in this
chapter.
OTMPHQ010010L
2. Make sure to completely close the charging door.

à The charging door dose not have a
locking system.
PlugPlug Electric OutletElectric Outlet
OAEEQ016061
3. Disconnect the plug from the household electric outlet. Do not pull the cable when disconnecting the plug.
4. Close the protective cover for the charging connector so that foreign
material cannot get into the terminal.
5. Put the charging cable inside the cable compartment to protect it.

Foreword / Hybrid System Overview
1-32
Unlock Charging Connector in
Emergency
OTMPHQ010011L
If the charging connector does not
disconnect due to battery discharge and
failure of the electric wires, open the
hood and slightly pull the emergency
cable. The charging connector will then disconnect. Precautions for Portable Charger
(ICCB: In-Cable Control Box)
[
Use the portable charger that is
certified by HYUNDAI Motors.

[ Do not try to repair, disassemble, or
adjust the portable charger.

[ Do not use an extension cord or
adapter.

[ Stop using immediately when failure
occurs.

[ Do not touch the plug and charging
connector with wet hands.

[ Do not touch the terminal part of the
AC charging connector and the AC
charging inlet on the vehicle.

[ Do not connect the charging
connector to voltage that does not
comply with regulations.

[ Do not use the portable charger if it
is worn out, exposed, or there exists
any type of damage on the portable
charger.

[ If the ICCB case and AC charging
connector is damaged, cracked, or the
wires are exposed in any way, do not
use the portable charger.

[ Do not let children operate or touch
the portable charger.

Foreword / Hybrid System Overview
1-34
When the hybrid system is turned ON,
the gasoline engine may run or may not.
In this situation, you may feel a vibration.
This does not indicate a malfunction. When the “
” indicator illuminates, the
hybrid system is ready to begin driving.
Even if the engine is off, you can operate
the vehicle as long as the “
” indicator
is illuminated.
NOTICE
The hybrid system contains many
electronic components. High voltage
components, such as cables and other
parts, may emit electromagnetic waves.
Even when the electromagnetic cover
blocks electromagnetic emissions,
electromagnetic waves may have an
effect on electronic devices. When your
vehicle is not used for a long period of
time, the hybrid system will discharge.
You need to drive the vehicle several
times a month. Driving at least for 1
hour or 16 km. When the hybrid battery
is discharged, or when it is impossible
to jump start the vehicle, you contact
your authorized HYUNDAI dealer.
WARNING

[ When you start the hybrid system
with the shift button in P (Parking), the “
” indicator illuminates on
the instrument cluster. The driver
can drive the vehicle, even when the
gasoline engine is off.

[ When you leave the vehicle, you
should turn OFF the hybrid system
or locate the shift button in P (Park).
When you depress the accelerator
pedal by mistake, or when the shift
button is not in P (Park), the vehicle
will abruptly move, possibly resulting
in serious injury or death. Virtual Engine Sound System (VESS)
The Virtual Engine Sound System
generates engine sound for pedestrians
to hear vehicle sound because there is
limited sound while motor power is used.
[
When the engine is running, the gear
shift button is not in P (Park), the VESS
will operate.

[ When the gear is shifted to R
(Reverse), an additional warning
sound will be heard.
What does regenerative braking do?
It uses an electric motor when
decelerating and when braking and
transforms kinetic energy to electrical
energy in order to charge the high
voltage battery.
Battery
[ The vehicle is composed of a high
voltage battery that drives the motor
and air conditioner, and an AGM type
12V battery that drives the lamps,
wipers, and audio system.

[ The integrated 12V battery is
automatically charged when the
vehicle is in the ready (
) mode.

[ Plug-in hybrid vehicle
- The vehicle is composed of a high voltage battery that drives the
motor and air-conditioner, and an
auxiliary battery (12 V) that drives
the lamps, wipers, and audio
system.
- The auxiliary battery is automatically charged when the
vehicle is in the ready (
) mode.