ECO mode Hyundai Sonata 2016 Car Multimedia System Manual
Page 138 of 308
6-4 I Voice Recognition
Extending the Listening Time
When the system is waiting for your com-
mand, after the voice prompt and beep
have been heard, if you press the voice
recognition icon (shorter than 0.8 sec-
onds), then the beep will sound again and
standby mode will restart.
When activated, voice recognition waits for
your command for 5 seconds. If you say
nothing for 5 seconds, a voice prompt will
ask for your command again.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 139 of 308
Starting/Ending and Setting Voice Recognition I 6-5
06
Skipping Prompt Messages
When you hear the prompt message,
press the voice recognition icon on the
steering wheel remote control to skip the
message and go directly to
listening mode
to sa y your command.
This results in f
aster operation when
you feel the message is too long or you
already know the command to use.
Adjusting Voice
Recognition Volume
During voice recognition, rotate the vol-
ume knob to adjust the message volume.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 156 of 308
6-22 I Voice Recognition
Siri Eyes Free
How to start Siri
If you want to use Siri, you have to con-
nect your iOS device to Multimedia system
through Bluetooth.
(Please check whether your iOS device
supports Siri and turning Siri On)
Then you can use Siri while pressing and
holding
key on the steering wheel.
How to use Siri
When you access the Siri screen while
pressing and holding
key on the
steering wheel, you can press
Speak but-
ton and then you can speak what you
want. Please see the Multimedia system
only supports “Phone” related functions.
Other functions will be performed in your
iOS device. If you press voice key quickly,
Siri would re-start. If you hold down voice
key, Siri would be terminated and the
screen would go back to the previous
screen. Eyes-Free mode would be acti-
vated automatically while you are driving.
When shifting gears into P or putting the
Parking break on, Eyes-Free mode would
be deactivated automatically.
i Information
Functions and feedbacks from voice
commands via Siri are ex
ecuted in iOS
device. If iOS version changed, functions and
feedbacks can be changed according to iOS
device.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 161 of 308
SoundHound I 7-5
07
SoundHound
SoundHound is a music search engine. It enables users to identify
music by playing or singing a song. It is also possible to search by
typing the name of the artist, song, album or lyrics.
The head unit should be connected to the Internet in order to use
SoundHound. (ex. Wi-Fi)
Accessing SoundHound
1. From the Home screen, select All Menus, My Menu then select
SoundHound
button.
2. Select SoundHound
button on Radio modes (AM, FM and
SiriusXM) or Media modes (CD, Bluetooth Audio, iPod, USB,
My Music and AUX).
SoundHound Main Screen
Name Description
ModeDisplays current operating mode.
Back button Goes back to previous mode.
What’s that
Song? Starts the song recognition process. After this
process is complete, it goes to Song screen.
Search Goes to Search screen.
History Goes to History screen.
Favorites Goes to Favorites screen.
Charts Goes to Charts screen.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 162 of 308
7-6 I Info
Recognizing Music
After selecting SoundHound button, the song recognition pro-
cess is activated, the system will match current playing song with
the SoundHound music database.
Music from Smartphones and MP3 players that are not connected
to head unit can also be recognized.
Searching Music
Music can also be searched by selecting the Search option in
SoundHound main screen and typing a song, artist, album or lyr-
ics into the search field.
Name Description
Now Listening…Message displayed while SoundHound is pro-
cessing the music.
Retry
Starts over the song recognition process.
CancelCancels song recognition process and Exits
SoundHound.
Back button
Goes back to previous screen.
Name Description
Search
Displays current operating mode.
Back buttonGoes back to SoundHound main screen.
MenuDisplays menu options:
Home: Goes back to SoundHound main screen.
History: Goes to History screen.
Favorites: Goes to Favorites screen.
Exit: Exits SoundHound application and goes back to
previous media mode.
Delete option is available in Favorites and History
screens.
Search field Displays search field. Once text is typed, recommended
song, artist, album or lyrics information that might match
the search criteria is displayed in the scroll menu.
Search icon
Starts the searching process.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 174 of 308
7-18 I Info
Android Auto
What is Android Auto?
You can securely manipulate your smart phone while driving by
using this feature. Various functions on your smart phone are
displayed on the multimedia system so you can easily use any of
them (finding the direction, making a call, listening to music, etc.).
“Android Auto” appears with Android phone connected. Available
functions and operations may differ depending on the company
model.
For more information, refer to the manual or visit the website.
Precautions
!Ÿ
Android Auto is a registered trademark of Google Inc.
!Ÿ
Android Auto is unavailable if the version of communication pro-
tocol is not supported or your phone is unable to be recognized
due to a shutdown caused by a failure or defect in the device
itself.
!Ÿ
Your phone may not be recognized if its battery is low. Charge
your phone then try again.
!Ÿ
If your phone is shut down due to a defect in the device itself,
reset your phone and try again.
!Ÿ
If you repeatedly connect and disconnect the USB cable on the
device in a short period of time, your phone may malfunction.
This can also cause a device failure.
!Ÿ
The device recognition time may differ depending on the device
type and firmware/OS version.
!Ÿ
For using this feature, the dedicated cable is recommended to
use. (Using a non-genuine product may cause noise or malfunc-
tion.)
!Ÿ
Normal operations are not guaranteed when you arbitrarily
manipulate your phone while Android Auto is active.
!Ÿ
You cannot run Android Auto during a Blue Link call but you can
run Android Auto during a Bluetooth call. (However, you cannot
use audio-related features in Android Auto mode.)
!Ÿ
Android Auto may not operate normally due to mobile phone
issues.
!Ÿ
Carrier charges may apply to use Android Auto.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 176 of 308
7-20 I Info
NOTICE
Before connecting your mobile phone, check whether Android Auto is set
to be used in Setup > Connectivity Settings.
After connecting the mobile phone, y
ou must release the lock or accept it
to connect Android Auto nor mally
.
With Android Auto connected, press the
key on the steering
wheel to run the phone function of Android Auto.
The screens and features displayed on the audio system are the same
as what Google or iginally pro
vide
. The screens and features are subject
to change according to the policy of each individual company.
CAUTIONS WHEN USING ANDROID AUTO
When Android Auto is activated, you can use only phone features among
all Bluetooth features.
You cannot use Bluetooth Media features such as
Bluetooth Audio and Pandora. If you want to use such features, remove
the USB cable before use.
Android Auto mode does not support the feature that enables you to
search f or music
les by controlling the
TUNE key.
In case Android Auto is not activated even after a connection has been
made successfully, chec k the f
ollowing:
– Check the status of Phone Application(Check if an error has occurred)
– Terminate the Android Auto process and attempt a reconnection
– Check whether Android Auto is set to be used in Setup > Connectivity Settings.
If Android Auto does not work normally even after a reconnection has
been made , see the man
ual pro
vided by Google or visit our website.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 180 of 308
9-2 I Setup
Setup
Setup
Setup is the screen to control system set-
tings of the AVN.
To enter the screen, select the
SETUP
key of the device or the
Setup button in
All Menus.
Features Description
NavigationProvides Normal/Screen/
Guidance/Route/Safety
Setting.
SoundProvides the sound control
options for Position, Bass,
Mid, Treble, Volume, Ratio
and Advanced settings.
Display
Provides the Mode/Brightness/
Adjust settings.
PhoneProvides the Bluetooth
Connection/Auto Connection
Priority/Ringtone/System
Bluetooth Information settings.
Blue Link
Provides the Activation/
Modem Information settings.
Voice RecognitionProvides the time and date
settings.
ClockProvides the time and date
settings.
Features
Description
Wi-FiProvides the Wi-Fi On and
Network Connection set-
tings.
Language
Provides the Change
Language settings.
Keyboard
Provides settings to switch
keyboard layouts.
Downloaded
Apps Provides the removal set-
tings for downloaded and
installed apps.
Screen
Saver Provides the Clock/None
settings.
Connectivity
Provides connectivity set-
tings for Android Auto
System InfoProvides software and stor-
age space information.
Display OffProvides the Display Off
(touch activation) function.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 186 of 308
9-8 I Setup
Service Activation
Select the BLUELINK key Ü
Select
Blue Link Settings Ü
Select Service Activation
Activation may take up to five minutes.
Do not turn the engine off while activation
is in progress.
If activation fails, contact the Blue Link
Center at (855) 2-BlueLink.
During service activation, the hard keys in
the head unit do not function.
Modem Information
Select the BLUELINK key Ü
Select
Blue Link Settings Ü
Select Modem Information
Features Description
USIM
USIM Identity number
IMEIEquipment Identity number
Voice Recognition Settings
Configure how to make a call with
Voice Recognition Guidance and Voice
Recognition.
Features Description
Guidance Select an option from
Beginner, Normal, or
Expert.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E
Page 188 of 308
9-10 I Setup
Language Settings
You can configure the displayed system
language.
When the language is changed, the
system language is automatically
changed.
Unique data including MP3 file name is
not changed and some languages don’t
support voice recognition.
Keyboard Settings
You can configure the keyboard layout for
each language.
You can configure ABCD or QWERTY
keyboards for the system.
i Information
Con gured keyboard layouts are applied to all
input modes.
Downloaded Apps Settings
Displays the applications that were down-
loaded through the Download Center. View
the memory status of installed applications
or delete them.
You can delete downloaded applications in
the Download Center. To recover a deleted
application, you can re-install the applica-
tion with the re-download function in the
Download Center.
) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E ) @ - ' . : @ ( < 6 4 " @ / > 1 B S U J O E E