boot Hyundai Sonata 2016 Car Multimedia System Manual

Page 19 of 308

Starting the System for the First Time I 1-9
01
Starting the System for the
First Time
Turning the System On/Off
Press the engine start button or set the
ignition key to On or ACC. Each time you
turn on the system, a boot logo and safety
warning will appear.
Pressing the power key on the head unit
will display the user confirm screen. To
change the system language between
English, French, Spanish and Korean
press the Change
Language button.
NOTICE
Cannot operate the system while it is booting
up. It ma
y take some time for all of features of
the system, particularly the voice recognition
system, to be ready for use.
Pressing and holding the power key on the
head unit will turn off the system.
You can change Screen Saver Settings in
Setup to display a clock or another chosen
image on the Screen Saver.
i Information
If you turn off the system during a phone call
using the Hands-free feature, then the call will

automatically switch to your mobile phone.
NOTICE
Check the volume when turning on the
system. Before tur
ning on the system, adjust
the volume to a reasonable level.
System Reset
The System Reset function restores the
system when it is not operating correctly.
Press and hold the RESET
key f
or a sec-
ond or longer. (It is recommended that you
press the RESET
key using a tool, such as
a pin or a clip.)
NOTICE
Resetting the system restores all existing
settings and configurations (e.g.
volume,
display, etc.) back to their factory defaults.
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 69 of 308

Before Using the Bluetooth Õ Handsfree I 3-3
03
CAUTIONS upon Connecting
Bluetooth® Phone


Before connecting the head unit with
the mobile phone, check to see that the
mobile phone supports Bluetooth
® fea-
tures


Even if the phone supports
Bluetooth®
Wireless Technology, the phone will
not be found during device searches if
the phone has been set to hidden state
or the Bluetooth
® power is turned off.
Disable the hidden state or turn on the
Bluetooth
® power prior to searching/
connecting with the head unit.


If Auto Connection is used, the
Bluetooth
® phone is automatically con-
nected when the ignition is turned on,
making it unnecessary to have to con-
nect the phone with the head unit every
time.

If you do not want automatic connection
with your Bluetooth
® device, turn the
Bluetooth® feature off of the Bluetooth®
device.


Park the vehicle when connecting the
head unit with the mobile phone.


Bluetooth
® connection may become
intermittently disconnected in some
mobile phones. Follow these steps to
try again.
1. Turn the Bluetooth
® function within
the mobile phone OFF/ON and try
again.
2. Turn the mobile phone power OFF/
ON and try again.
3. Completely remove the mobile
phone battery, reboot, and then
again.
4. Reboot the Multimedia System and
try again.
5. Delete all paired devices from both
of Phone and Head Unit sides and
then try again

The Handsfree call volume and quality
may differ depending on the mobile
phone.


Pairing Bluetooth
® devices and use of
other Bluetooth® features are not sup-
ported when the vehicle is in motion. For
safety, please first park your vehicle.


When downloading contacts, is not
functioning and is not described within
this user’s manual it may be related with
the mobile device. When that occurs,
inquire within the mobile phone manu-
facturer.

)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE 

Page 190 of 308

9-12 I Setup
i Information
The settings are allowed only after
disconnecting any type of USB device

including an Android device and a USB
memory as well.
Pandora may not be used outside of the
United States .
Regardless of using Android Auto

, when
any Android de vice is connected with a USB
cab

le, it basically starts charging.
Carrier charges may apply to use Android
Auto
.
System Info
At the System Info screen, software ver-
sion information, updates, and storage
status details are available.
Features Description
SW InfoSystem version informa-
tion and update details are
available.
Select the Update button
to update the system. After
update is complete, the
system will reboot auto-
matically.
Storage Space Displays the memory space
available for media files
and applications.
System Update
At the System Info screen, insert the
updated memory (USB or SD card) with
the latest file downloaded, and then select
the
Update button to begin updating. The
system will then reboot automatically.
i Information
This product needs supplemented software
updates, additional new functions
, and
renewed maps, which collectively may take
some time to complete, depending on the
amount of data.
CAUTION
If the power is disconnected or the USB or
SD card is removed dur
ing an update, the
data might be damaged. Please wait until the
update is complete while the engine is on.
)@-'.:@(<64"@/>1BSUJOEE )@-'.:@(<64"@/>1BSUJOEE