set clock Hyundai Sonata 2018 Quick Reference Guide

Quick Reference Guide I 0706 I Quick Reference Guide
FEATURES AND CONTROLS
STEERING WHEEL ADJUSTMENTS
1. Pull the lever 1 down.
2. Set the angle 2 and distance 3.
3. Pull the lever 1 up to lock
position.
NOTE: Do not adjust while driving.
NOTE: Tighten the fuel filler cap until
one click is heard.
FUEL FILLER LID
• Move the lever towards L (left) or R
(right) on the switch.Then adjust the
mirror by using the mirror adjustment
control switch.
DRIVER'S MAIN CONTROLS
Outside Rearview Mirror
Power window lock button
Disables the power window switches
on the rear passenger doors.
Door Lock
Locks/unlocks all doors.

Press past detent to fully open/close
window.
Window Auto down/up (if equipped)
1
2
3
Pull the handle of the release
located on the left side of the trunk.
Emergency fuel filler door release
Check the engine oil regularly
between recommended oil
changes.
CLOCK ADJUSTMENT
1. Press the SETUP button.
2. Touch the “Date/Time” button on screen.
SONATAHYUNDAI

Quick Reference Guide I 1312 I Quick Reference Guide
FEATURES AND CONTROLS
REAR SEAT FOLDING
REAR PARKING ASSIST SYSTEM
The rear parking assist system assists
the driver during reverse movement of
the vehicle by chiming if any object is
sensed within the distance of 47 inch
behind the vehicle.
Push the button to turn off the rear
parking assist system. The indicator
light on the button will turn on.
SMART TRUNK
Smart Trunk
Trunk will open automatically when
detecting smart key within range near
the trunk for more than 3 seconds.
To enable Smart Trunk
function:
Vehicle must be in P (Park) to adjust
settings in the User Setting mode.
1. Select "Door/Trunk" in the User
Settings in the instrument cluster.
2. Check "Smart Trunk".NOTE:
Function is active after 15 seconds when all doors are closed and locked
and key is not detected. The vehicle will also provide an audible and visual
alarm while activating. For more details, refer to Owner's Manual.
CHILD-PROTECTOR REAR DOOR LOCK
Lock
Insert a screwdriver
into the hole and
turn it to the lock
position.
Unlock
Insert a screwdriver
into the hole and
turn it clockwise to
unlock position.
HOMELINK WIRELESS GARAGE CONTROL SYSTEM
Standard Programming
To train most devices, follow
these instructions:
1. For first-time programming,
press and hold the two
outside buttons. ( , ),
HomeLink® Channel 1 and
Channel 3, until the indicator
light begins to flash (after
10 seconds). Release both
buttons. Do not hold the
buttons for longer than 20
seconds.
2. Position the end of your
hand-held transmitter
1-3 inches (2-8 cm) away
from the homeLink® button
you wish to program while
keeping the indicator light
in view.
3. Simultaneously press and
hold both the HomeLink®
and hand-held transmitter
buttons until the
HomeLink® indicator light
changes from a slow to a
rapid blinking light. Now
you may release both the
HomeLink® and hand-held
transmitter buttons.
FlashingFlashing
SONATAHYUNDAI