tire pressure INFINITI FX35 2005 Manual PDF
Page 4727 of 4731
WT-34
TROUBLE DIAGNOSIS FOR SYMPTOMS
Revision: 2005 July 2005 FX
Inspection 4: Turn Signal Lamp Blinks When Ignition Switch Is Turned OnAES000ZI
DIAGNOSTIC PROCEDURE
1. CHECK TIRE PRESSURE WARNING CHECK SWITCH CIRCUIT
Check continuity between BCM harness connector M3 terminal 15 (G) and ground.
OK or NG
OK >> Check turn signal lamp operation. Refer to LT- 9 1 , "Sys-
tem Description" .
NG >> Repair or replace harness connector.
Inspection 5: ID Registration Can Not Be CompletedAES000ZJ
DIAGNOSTIC PROCEDURE
1. ID REGISTRATION (ALL)
Perform ID registration of all transmitters.
Can ID registration of all transmitters be completed?
YES >> INSPECTION END
NO >> GO TO WT-28, "
TROUBLE DIAGNOSIS FOR SELF-DIAGNOSTIC ITEMS" .
Te r m i n a l
Continuity
(+) (–)
Connector Te r m i n a l
(Wire color) Ground Should not exist.
M3 15 (G)
SEIA0438E
Page 4730 of 4731
SERVICE DATA WT-37
C
D
F
G H
I
J
K L
M A
B
WT
Revision: 2005 July 2005 FX
SERVICE DATAPFP:00030
Road WheelAES000KB
TireAES000KC
Unit: kPa (kg/cm2 , psi)
Tightening TorqueAES000KD
Kind of wheel Aluminum Steel (for emergency use)
Deflection limit Lateral deflection
Less than 0.3 mm
(0.01 in) Less than 1.5 mm
(0.06 in)
Vertical deflection Less than 0.3 mm
(0.01 in) Less than 1.5 mm
(0.06 in)
Allowable quantity of residual
unbalance Dynamic
(At rim flange) Less than 5.0 g (0.2 oz) (per side) —
Static (At rim flange) Less than 20 g (0.7 oz) —
Tire size Air pressure
Front wheel Rear wheel
P265/60R18 109V 220 (2.2, 32) 220 (2.2, 32)
P265/50R20 106V 220 (2.2, 32) 220 (2.2, 32)
T175/90D18 110M 420 (4.2, 60) 420 (4.2, 60)
Wheel nut 112.5 N·m (11 kg-m, 83 ft-lb)