rear sunshade INFINITI M35 2007 Factory User Guide

RF-28
SUNROOF
Revision: 2007 April2007 M35/M45
DISASSEMBLY
1. Remove sunshade stopper mounting screws from the rear end of sunroof frame, and then remove sun-
shade stopper.
2. Remove sunshade from the rear end of sunroof frame.
NOTE:
Removing is possible even by the on vehicle.
3. Remove sunshade knob from the sunshade.
4. Remove guide stopper from the rear end of sunroof frame.
5. Remove sunroof guide assembly from the rear end of sunroof frame.
6. Remove guide wire assembly from sunroof guide assembly.
7. Remove rear drain assembly and drain guide from sunroof guide assembly.
8. Remove screws from left and right sides of each wind deflector holder. Extract pawls through rail holes,
then remove left and right sides of wind deflector holder.
9. Remove screws from front end of sunroof unit. Extract pawls through frame holes, then remove wind
deflector from frame assembly.
NOTE:
Removing is possible even by the on vehicle.
ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
Be sure to place the sunroof guide assembly in the symmetrical and fully close position.
1. Sunshade stopper 2. Sunshade 3. Sunshade knob
4. Guide stopper 5. Sunroof guide assembly (LH/RH) 6. Guide wire assembly (LH/RH)
7. Drain guide (LH/RH) 8. Rear drain assembly 9. Wind deflector assembly
10. Sunroof frame