seat INFINITI M35 2007 Factory Service Manual

SE-116
CLIMATE CONTROLLED SEAT
Revision: 2007 April2007 M35/M45

to seat cushion thermal electric device terminal 1,

through climate controlled seat control unit terminal 22.
Then ground is supplied

to climate controlled seat control unit terminal 21,

through seat cushion thermal electric device terminal 2,
Then the climate controlled seat control unit recognizes seat cushion thermal electric device sensor signal.
When climate controlled seat control unit recognizes climate controlled seat switch HEAT signal and, seat
cushion thermal electric device sensor signal,
Power is supplied

to seat cushion thermal electric device terminal 4,

through climate controlled seat control unit terminal 5.
Then ground is supplied

through seat cushion thermal electric device terminal 6,

to climate controlled seat control unit terminal 6,

through climate controlled seat control unit terminal 3,

through body grounds B5, B40 and B131.
When climate controlled seat control unit recognizes climate controlled seat switch COOL signal and seat
cushion thermal electric device sensor signal,
Power is supplied

to seat cushion thermal electric device terminal 6,

through climate controlled seat control unit terminal 6.
Then ground is supplied

through seat cushion thermal electric device terminal 4,

to climate controlled seat control unit terminal 5.

through climate controlled seat control unit terminal 3,

through body grounds B5, B40 and B131.
When the ignition switch turned to ON or START position,
Power is supplied

to seatback thermal electric device terminal 1,

through climate controlled seat control unit terminal 23.
Then ground is supplied

to climate controlled seat control unit terminal 24,

through seatback thermal electric device terminal 2,

through climate controlled seat control unit terminal 3,

through body grounds B5, B40 and B131.
Then the climate controlled seat control unit recognizes seatback thermal electric device sensor signal.
When climate controlled seat control unit recognizes climate controlled seat switch HEAT signal and seatback
thermal electric device sensor signal,
Power is supplied

to seatback thermal electric device terminal 4,

through climate controlled seat control unit terminal 15,
ground is supplied

to climate controlled seat control unit terminal 16,

through seatback thermal electric device terminal 6,

through climate controlled seat control unit terminal 3,

through body grounds B5, B40 and B131.
This seatback thermal electric device generates heat wind is warmed.
When climate controlled seat control unit recognizes climate controlled seat switch COOL signal and seatback
thermal electric device sensor signal,
Power is supplied

to seatback thermal electric device terminal 6,

CLIMATE CONTROLLED SEAT
SE-117
C
D
E
F
G
H
J
K
L
MA
B
SE
Revision: 2007 April2007 M35/M45

through climate controlled seat control unit terminal 16,
ground is supplied

to climate controlled seat control unit terminal 15,

through seatback thermal electric device terminal 4,

through climate controlled seat control unit terminal 3,

through body grounds B5, B40 and B131.
When climate controlled switch selects HEAT,
Power is supplied

to climate controlled seat switch terminal 5,

through climate controlled seat control unit terminal 8.
Ground is supplied

to the climate controlled seat switch terminal 6,

through body grounds B402 and B405.
Then climate controlled seat switch HEAT indicator is energized.
When climate controlled switch select COOL,
Power is supplied

to climate controlled seat switch terminal 4,

through climate controlled seat control unit terminal 9.
Ground is supplied

to the climate controlled seat switch terminal 6,

through body grounds B402 and B405.
Then climate controlled seat switch COOL indicator is energized.

SE-118
CLIMATE CONTROLLED SEAT
Revision: 2007 April2007 M35/M45
SchematicNIS0027J
TIWT1391E

CLIMATE CONTROLLED SEAT
SE-119
C
D
E
F
G
H
J
K
L
MA
B
SE
Revision: 2007 April2007 M35/M45
Wiring Diagram — C/SEAT — NIS0027K
TIWT2129E

SE-120
CLIMATE CONTROLLED SEAT
Revision: 2007 April2007 M35/M45
TIWT2130E

CLIMATE CONTROLLED SEAT
SE-121
C
D
E
F
G
H
J
K
L
MA
B
SE
Revision: 2007 April2007 M35/M45
TIWT1394E

SE-122
CLIMATE CONTROLLED SEAT
Revision: 2007 April2007 M35/M45
TIWT2131E

CLIMATE CONTROLLED SEAT
SE-123
C
D
E
F
G
H
J
K
L
MA
B
SE
Revision: 2007 April2007 M35/M45
TIWT2132E

SE-124
CLIMATE CONTROLLED SEAT
Revision: 2007 April2007 M35/M45
Terminal and Reference Value for Climate Controlled Seat Control UnitNIS0027L
Te r -
minalWire
ColorItemSignal
Input/
OutputConditionVoltage (V)
(Approx)
2 R/Y Ignition switch power supply Input Ignition switch ON or START Battery voltage
3 B Ground — — 0
4 R/Y Ignition switch power supply Input Ignition switch ON or START Battery voltage
5G/RSeat cushion thermal electric
device power supply (HEAT)InputIgnition switch
ON or STARTClimate controlled
seat switch selectHEAT or
COOL0 – Battery
voltage
OFF 0
6G/BSeat cushion thermal electric
device power supply (COOL)InputIgnition switch
ON or STARTClimate controlled
seat switch select COOL or
HEAT 0 – Battery
voltage
OFF 0
7 B/R Blower motor ground — — 0
8 LG/R HEAT switch indicator signal OutputIgnition switch
ON or STARTClimate controlled
seat switch select HEAT Battery voltage
OFF 0
9 LG/B COOL switch indicator signal OutputIgnition switch
ON or STARTClimate controlled
seat switch select COOL Battery voltage
OFF 0
10 Y/R HEAT switch signal InputIgnition switch
ON or STARTClimate controlled
seat switch select HI HEAT 2.6 – 3.5
MID HEAT 1.6 – 2.5
LO HEAT 0.5 – 1.5
OFF 0
11 B / RClimate controlled seat switch
power supplyInput Ignition switch ON or START Battery voltage
14 V/W Blower motor power supply Input Ignition switch ON or START Battery voltage
15 W/RSeatback thermal electric device
power supply (HEAT) InputIgnition switch
ON or STARTClimate controlled
seat switch select HEAT or
COOL0 – Battery
voltage
OFF 0
16 W/BSeatback thermal electric device
power supply (COOL) InputIgnition switch
ON or STARTClimate controlled
seat switch select COOL or
HEAT 0 – Battery
voltage
OFF 0
17 R/B Blower motor speed control signal InputIgnition switch
ON or STARTClimate controlled
seat switch select HEAT or
COOL4.5 – 8.0
OFF 0
18 V Blower motor tachometer signal OutputIgnition switch
ON or STARTClimate controlled
seat switch select HEAT or
COOL4.5 – 8.0
OFF Battery voltage
20 Y/G COOL switch signal InputIgnition switch
ON or STARTClimate controlled
seat switch select HI COOL 2.6 – 3.5
MID COOL 1.6 – 2.5
LO COOL 0.5 – 1.5
OFF 0
21 GR/LSeat cushion thermal electric
device sensor ground— Ignition switch ON 0
22 GR/RSeat cushion thermal electric
device sensor signalInputBlower motor operated 0.5 – 4
Ignition switch OFF 0

CLIMATE CONTROLLED SEAT
SE-125
C
D
E
F
G
H
J
K
L
MA
B
SE
Revision: 2007 April2007 M35/M45
Work FlowNIS0027M
1. Check the symptom and customer's requests.
2. Understand the outline of system. Refer to SE-114, "
System Description" .
3. Perform the preliminary check. Refer toSE-126, "
Preliminary Check" .
4. According to the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to SE-126,
"Trouble Diagnoses Symptom Chart" .
5. Does climate controlled seat operate normally? YES: GO TO 6, NO: GO TO 4.
6. INSPECTION END.
23 L/RSeatback thermal electric device
sensor signalInputBlower motor operated 0.5 – 4
Ignition switch OFF 0
24 LSeatback thermal electric device
sensor ground— Ignition switch ON 0 Te r -
minalWire
ColorItemSignal
Input/
OutputConditionVoltage (V)
(Approx)