engine INFINITI Q50 2019 Warranty Information Booklet
Page 8 of 60
5
LIMITATION OF WARRANTIES AND 
OTHER WARRANTY TERMS AND 
STATE LAW RIGHTS EXTRA EXPENSES 
- LIMITATIONS OF DAMAGES THIS 
WARRANTY DOES NOT COVER 
INCIDENTAL OR CONSEQUENTIAL 
DAMAGES SUCH AS LOSS OF THE USE 
OF THE VEHICLE, INCONVENIENCE OR 
COMMERCIAL LOSS. 
ANY IMPLIED WARRANTY OF 
MERCHANTABILITY AND FITNESS FOR 
A PARTICULAR PURPOSE SHALL BE 
LIMITED TO THE DURATION OF THIS 
WRITTEN WARRANTY. 
Some states do not allow the exclusion or 
limitation of incidental or consequential 
damages or limitations on how long an 
implied warranty lasts, so the above 
limitations or exclusions may not apply to 
you. This warranty gives you specific legal 
rights, and you may also have other rights 
which vary from state to state.
Infiniti does not authorize any person to 
create for it any other warranty, obligation 
or liability in connection with this vehicle.
THE WARRANTY BEGINS
The warranty period begins on the date the 
vehicle is delivered to the first retail buyer or 
put into service, whichever is earlier.
FOR HOW LONG AND WHAT IS 
COVERED
BASIC COVERAGE
•The basic coverage period is 48 months or 
60,000 miles, whichever comes first.
•The warranty covers any repairs needed to 
correct defects in materials or workmanship 
of all parts and components of each new 
Infiniti vehicle supplied by Infiniti subject 
to the exclusions listed under the heading 
”WHAT IS NOT COVERED” or, if the part is 
covered by one of the separate coverages 
described in the following sections of this 
warranty, that specific coverage applies 
instead of the basic coverage.
POWERTRAIN COVERAGE
•The Powertrain coverage period is 72 
months or 70,000 miles, whichever comes 
first.
•This warranty covers any repairs needed to 
correct defects in material or workmanship. 
•Powertrain coverage includes components 
listed below, under the headings Engine, 
Transmission and Transaxle, Drivetrain, and 
Restraint System, supplied by Infiniti, subject 
to the exclusions listed under the heading 
“WHAT IS NOT COVERED.” ENGINE - Cylinder heads and block and 
all internal parts, rocker covers and oil pan, 
valve train and front cover, timing chain and 
tensioner, oil pump, water pump and fuel 
pump, fuel injectors, intake and exhaust 
manifolds, flywheel, seals and gaskets.  TRANSMISSION AND TRANSAXLE 
- Case and all internal parts, torque 
converter and converter housing, 
automatic transmission control module, 
transfer case and all internal parts, seals 
and gaskets, clutch cover and housing, 
A/T cooler, and electronic transmission 
controls.
DRIVETRAIN - Drive shafts, final drive 
housing and all internal parts, propeller 
shafts, universal joints, bearings, seals and 
gaskets.
RESTRAINT SYSTEM - Air bags and 
related electronic control systems. 
CORROSION COVERAGE (PERFORATION 
FROM CORROSION) 
Any body sheet metal panel supplied by Infiniti 
found to have developed perforation (rust-
through) due to corrosion in normal use is 
covered for 84 months, regardless of mileage, 
except for those items listed under “WHAT IS 
NOT COVERED.” No additional rust proofing 
applications are required. Perforation is a 
condition in which any body sheet metal panel 
has corroded from one surface to another. 
TOWING COVERAGE 
If your vehicle is inoperative due to the failure 
of a warranted part during any of the New 
Vehicle Limited warranties, including Emission 
and Seat belt warranties, towing service to the 
nearest authorized Infiniti retailer is covered. 
(Continued on next page)
2019 NEW VEHICLE LIMITED WARRANTY 
Page 9 of 60
62019 NEW VEHICLE LIMITED WARRANTY
ADJUSTMENT COVERAGE 
Service adjustments not usually associated 
with the replacement of parts, such as wheel 
alignment, and wheel balancing are covered 
only during the first 12 months or 12,000 
miles, whichever comes first. 
• Limited 6 month warranty coverage:OE wiper blade inserts are covered for the 
first six months of ownership. 
REFRIGERANT RECHARGE ONLY 
COVERAGE
Refrigerant recharge not associated with the 
repair or replacement of a warranted part 
is covered only during the first 12 months, 
regardless of the mileage.
NO CHARGE 
Warranty repairs will be made at no charge 
for parts and/or labor (except for tires, in 
which case you may pay certain charges). 
Any needed parts replacement will be made 
using genuine Infiniti or Infiniti approved new 
or remanufactured parts approved by Infiniti 
for use on Infiniti vehicles. Infiniti reserves the 
right to make changes at any time, without 
notice, to production and service parts in their 
specifications, colors, and materials, including 
those used in connection with warranty 
repairs. For this reason, when approved by 
Infiniti and at Infiniti’s discretion, functionally 
equivalent replacement parts may be used that 
do not exactly match the original production 
part. 
OBTAINING WARRANTY SERVICE
•You must take the vehicle to an authorized 
Infiniti retailer in the United States or Canada 
during regular business hours at your expense 
in order to obtain warranty service. The 
names and addresses of authorized Infiniti 
retailers are listed in telephone directories. 
•If you require warranty service outside of 
the United States (see terms under caption 
“APPLICABILITY”), contact an Infiniti retailer 
in that country. 
MAINTENANCE, DATA ACCESS, 
AND RECORDS
 As a condition of this warranty, you are 
responsible for properly using, maintaining 
and caring for your vehicle as outlined in your 
Owner’s Manual, and of maintaining copies of 
all maintenance records & receipts for review 
by Infiniti. Failure to do so is likely to result in 
the denial of warranty. 
You are also required to provide consent to 
give Infiniti access to data stored on vehicle 
systems. Failure to do so is likely to result in the 
denial of warranty coverage. 
Evidence of the performance of the required 
maintenance should be kept and may need to 
be presented as proof of such maintenance 
in connection with related warranty repairs. 
To assist you in maintaining appropriate 
records, the Maintenance Log located in your 
Owner’s Literature Kit can be used along with 
supporting repair invoices, receipts and other 
such records. 
WHAT IS NOT COVERED 
GENERAL EXCLUSIONS This warranty does not cover damage, failures 
or corrosion resulting from or caused by: 
•Failure to operate the vehicle in accordance 
with the Owner’s Manual 
•Misuse, such as using the vehicle to tow 
•Failure of a component not covered by 
warranty 
•Racing and competitive driving 
•Theft, vandalism, fire, or flooding (including 
engine water ingestion) 
•Accident, collision, being towed 
•Repairs performed by anyone other than an 
authorized Infiniti retailer 
•Glass breakage, unless resulting from 
defects in material or workmanship 
•Normal wear and tear, including dings, dents, 
chips, or scratches 
•Damage caused by any automated or 
manually operated car wash or by using a 
pressure washer 
Note that complaints related to failure to 
comply with proper use of the vehicle as 
described in the applicable Owner’s Manual 
(including the lack of availability or use of 
proper fluid), or the vehicle’s lack of compliance 
with local regulations or environmental 
requirements of any country (other than the 
U.S. or Canada) are NOT covered by this 
warranty. 
(Continued on next page) 
Page 11 of 60
82019 INFINITI FEDERAL VEHICLE EMISSION CONTROL WARRANTIES
EMISSION DEFECTS WARRANTY
WHAT IS COVEREDInfiniti1 warrants that your vehicle was 
designed, built and equipped to conform at the 
time of sale with all applicable United States 
emission standards.
This warranty covers any repairs needed to 
correct defects in materials or workmanship 
which would cause your vehicle not to meet 
these standards.
WHAT IS COVERED UNDER THE 
DEFECTS WARRANTY
Covered components are listed below under 
the caption “WARRANTY PARTS LIST.” 
Exceptions to this warranty are listed below 
under the caption “WHAT IS NOT COVERED 
UNDER EITHER THE DEFECTS OR 
PERFORMANCE WARRANTIES.”
HOW LONG IS THE WARRANTYThis warranty is for 4 years or 60,000 miles, 
whichever occurs first. The warranty begins 
the date the vehicle is delivered to the first 
retail buyer or put into use, whichever is earlier. 
Additionally, the engine control module/
onboard diagnostic device and catalytic 
converter(s) listed below and indicated by an 
“
” under the caption “Warranty Parts List” 
are covered for 8 years or 80,000 miles, 
whichever occurs first.
EMISSIONS PERFORMANCE 
WARRANTY
WHEN DOES THIS WARRANTY APPLYThe Emissions Performance Warranty applies 
to your 2019 Infiniti vehicle ONLY when both 
of the following occur.
1.  The vehicle fails to meet applicable emissions  standards as judged by an emissions test 
approved by the Environmental Protection 
Agency (EPA).
2.   This failure results or will result in some 
penalty to you, such as a monetary fine or 
the denial of the right to use your vehicle, 
under local, state or federal law.
For example, if your state requires an EPA 
approved yearly vehicle inspection before 
you receive a renewed license, this warranty 
applies to your vehicle. In areas where there 
is no approved test program, this warranty 
does not apply.
WHAT IS COVERED AND FOR HOW LONG 
UNDER THE PERFORMANCE WARRANTY
Infiniti
1 warrants that it will remedy any non-
conformity in your vehicle which causes it to 
fail an approved emissions test during the first 
24 months or 24,000 miles, whichever occurs 
first. The warranty begins the date the vehicle 
is delivered to the first retail buyer or put into 
use, whichever is earlier. Additionally, failure of an approved emissions 
test resulting from the failure of those parts 
listed below under the caption “Warranty Parts 
List” are covered by the Emissions Defects 
Warranty described above. 
Exceptions to this warranty are listed below 
under the caption “WHAT IS NOT COVERED 
UNDER EITHER THE DEFECTS OR 
PERFORMANCE WARRANTIES.” 
WHAT IS NOT COVERED UNDER 
EITHER THE DEFECTS OR 
PERFORMANCE WARRANTIES
These warranties do not cover:
1.  Normal maintenance, service and parts 
replacement as outlined in the emissions 
control maintenance instructions of your 
Owner’s Manual.
2. Failures directly as a result of:
•Failure to perform required emission 
control maintenance as outlined in your 
Owner’s Manual.
•Misuse, accident or modification.
•Improper adjustment or installation 
of parts during the performance of 
maintenance services.
•Tampering with or disconnecting any part 
affecting vehicle emissions.
(Continued on next page)
1 Infiniti indicates Infiniti Division of Nissan North America, Inc., P.O. Box 685003, Franklin, Tennessee, 37068-5003, which d istributes Infiniti vehicles in the United States. 
Page 13 of 60
10
MAINTENANCE SERVICE AND 
REPLACEMENT PARTS
Important information concerning 
maintenance service and replacement parts is 
on page 17 of this booklet.
MAINTENANCE RECORDS
Receipts covering the performance of regular 
maintenance should be kept in the event 
questions arise concerning maintenance. The 
receipts should be transferred to subsequent 
owners.
IF YOU HAVE QUESTIONSYou may obtain further information 
concerning these warranties by following the 
procedure outlined in the “INFINITI OWNER 
SATISFACTION & ASSISTANCE” section of 
this booklet. In the case of the Performance 
Warranty, you may also contact or report any 
violations to the Office of Transportation and 
Air Quality, Vehicle Compliance Programs 
Group, U.S. Environmental Protection 
Agency, Ariel Rios Building (6405J), 1200 
Pennsylvania Avenue, N.W., Washington, D.C. 
20460. 
OTHER OBLIGATIONSInfiniti does not authorize any person to create 
for it any other warranty, obligation or liability 
in connection with this vehicle.
WARRANTY PARTS LIST
•• Fuel injection system
Engine control module/onboard diagnostic 
device
•• Oxygen sensor(s)
•• Mass air flow sensor
•• Intake manifold
•• Throttle body
Catalytic converter(s)
•• Exhaust manifold
•• Exhaust tube from manifold to catalytic converter
Front exhaust tube with catalytic converter
•• Camshaft position sensor(s)
•• Crankshaft position sensor(s)
•• Spark plugs, ignition coils and wires
•• Evaporative emission control system
•• Fuel filler neck restrictor and check valve
•• Fuel tank and filler cap
•• Positive crankcase ventilation system
Exhaust manifold with catalytic converter 
permanently attached
•• Intake manifold collector
•• Exhaust gas recirculation (EGR) control system
•• Hoses, clamps, fittings, tubing, sealing gaskets or devices, and mounting hardware 
used in above systems
•• Vacuum and temperature sensitive valves and switches used in above systems
•• Electronic sensors and controls used in above systems
The Emission Performance or Defect Warranty 
may be subject to future governmental 
administrative action. Infiniti reserves the 
right to change the terms of the warranty to 
be consistent with these actions. See your 
retailer for information regarding possible 
changes. 
o = Long Term Federal Emission Parts covered for 96 months/or 80,000 miles.
2019 INFINITI FEDERAL VEHICLE EMISSION CONTROL WARRANTIES 
Page 14 of 60
112019 INFINITI CALIFORNIA VEHICLE EMISSION CONTROL WARRANTIES¹
The following statement is required to be 
provided by regulations of the California Air 
Resources Board.
YOUR WARRANTY RIGHTS AND 
OBLIGATIONS
The California Air Resources Board is pleased 
to explain the emission control system 
warranty on your 2019 vehicle. In California, 
new motor vehicles must be designed, built 
and equipped to meet the State’s stringent 
anti-smog standards. Infiniti
2 must warrant 
the emission control system on your vehicle 
for the periods of time listed below provided 
there has been no abuse, neglect or improper 
maintenance of your vehicle.
Your emission control system may include 
parts such as the fuel-injection system, the 
ignition system, catalytic converter and 
engine computer. Also included may be hoses, 
belts, connectors and other emission-related 
assemblies.
Where a warrantable condition exists, Infiniti 
will repair your vehicle at no cost to you 
including diagnosis, parts and labor.
MANUFACTURER’S WARRANTY 
COVERAGE
For 4 years or 60,000 miles (whichever occurs 
first):
1.  If your vehicle fails a Smog Check inspection,  all necessary repairs and adjustments will 
be made by Infiniti to ensure that your 
vehicle passes the inspection. This is your 
emission control system PERFORMANCE 
WARRANTY.
2.   If any emission-related part on your vehicle 
is defective, the part will be repaired or 
replaced by Infiniti. This is your short-
term emission control system DEFECTS 
WARRANTY. 
For 7 years or 70,000 miles (whichever occurs 
first):
If an emission-related part listed in this 
warranty booklet specially noted with 
coverage for 7 years or 70,000 miles is 
defective, the part will be repaired or replaced 
by Infiniti. This is your long term emission 
control system DEFECTS WARRANTY.
OWNER’S WARRANTY 
RESPONSIBILITIES
As the vehicle owner, you are responsible for 
the performance of the required maintenance 
listed in your Owner’s Manual. Infiniti 
recommends that you retain all receipts 
covering maintenance on your vehicle, but 
Infiniti cannot deny warranty solely for the 
lack of receipts or for your failure to ensure the 
performance of all scheduled maintenance.
You are responsible for presenting your 
vehicle to an Infiniti retailer as soon as a 
problem exists. The warranty repairs should be 
completed in a reasonable amount of time, not 
to exceed 30 days.
(Continued on next page)
1 These warranties apply to all 2019 Infiniti vehicles sold for registration as new vehicles in California, Connecticut, Delawar e, Maine, Maryland, Massachusetts, New Jersey, New York, Oregon, 
Pennsylvania, Rhode Island, Vermont, or Washington only.
2 Infiniti indicates Infiniti Division of Nissan North America, Inc., P.O. Box 685003, Franklin, Tennessee, 37068-5003, which d istributes Infiniti vehicles in the United States. 
Page 15 of 60
122019 INFINITI CALIFORNIA VEHICLE EMISSION CONTROL WARRANTIES¹
As the vehicle owner, you should also be aware 
that Infiniti may deny you warranty coverage if 
your vehicle or a part has failed due to abuse, 
neglect, improper maintenance or unapproved 
modifications.
If you have any questions regarding your 
warranty rights and responsibilities, you should 
contact Infiniti’s Consumer Affairs Department 
at 1-800- 662-6200 or the California Air 
Resources Board at 9528 Telstar Avenue, El 
Monte CA 91731.
The following is Infiniti’s¹ new vehicle emission 
control warranty statement for vehicles 
certified for sale in California and sold for 
registration as a new vehicle in California, 
Connecticut, Delaware, Maine, Maryland, 
Massachusetts, New Jersey, New York, 
Oregon, Pennsylvania, Rhode Island, Vermont, 
or Washington only.EMISSIONS DEFECTS WARRANTY
WHAT IS COVEREDInfiniti1 warrants that your vehicle was 
designed, built and equipped to conform with 
all applicable requirements of the California 
Air Resources Board. This warranty covers 
any part which affects applicable regulated 
emission(s).
Exceptions to this warranty are listed below 
under the caption “WHAT IS NOT COVERED.”
HOW LONG IS THE WARRANTYThis warranty is for 4 years or 60,000 miles, 
whichever occurs first. Additionally, the 
components listed under the caption “Long-
Term Emission System Defects Warranty Parts 
List” are covered for 7 years or 70,000 miles, 
whichever occurs first, except that the catalytic 
converter(s) and engine control module (ECM) 
are warranted for 8 years or 80,000 miles, 
whichever occurs first. The warranty begins 
the date the vehicle is delivered to the first 
retail buyer or put into use, whichever is earlier.
Some items require scheduled replacement 
before 60,000 miles. These items are 
warranted only up to the replacement interval. 
The replacement intervals are outlined in the 
maintenance instructions in your Owner’s 
Manual.
(Continued on next page)
1 Infiniti indicates Infiniti Division of Nissan North America, Inc., P.O. Box 685003, Franklin, Tennessee, 37068-5003, which d istributes Infiniti vehicles in the United States. 
Page 16 of 60
132019 INFINITI CALIFORNIA VEHICLE EMISSION CONTROL WARRANTIES¹
(Continued on next page)
LONG-TERM EMISSION SYSTEM DEFECTS
WARRANTY PARTS LIST
Crankshaft Position SensorEGI Wiring Harness
Exhaust Manifold
Front Exhaust Tube
Fuel Injector
Fuel Pressure Sensor
Fuel Tank
Fuel Tube Assembly
High-Pressure Fuel Pump
Injector Fuel Tube 
Intake ManifoldIntake Manifold CollectorKnock SensorOxygen Sensor, Rear
ThermostatThrottle Body
Torque Converter 
Drive Plate
Turbocharger
VCR Actuator Assembly
VTC Electronic Actuator
VTC Oil Control Valve
Water Bypass Control Valve
Catalytic Converter°
Engine Control Module°
Exhaust Manifold 
with Catalytic Converter°
Front Exhaust Tube 
with Catalytic Converter°
Q50 2.0L X XX
X X XXX X X X XX
Q50 3.0L X X X X X X X X X X X
Q60 2.0L X X X
X X XXX X X X XX
Q60 3.0L X X X X X X X X X X X
Q70 3.7L X X
XXXX XXX
Q70 5.6L X XX X X X X X X
QX30 XX
X XXXXX XX X X XX
QX50 XX
XX X X X X X XX X X X X
QX60 XX
XX X X X X XX
QX80 X XX X X X
For information on additional models, please see your Infiniti dealer for details
°Long Term Federal Emission Parts covered for 96 months or 80,000 miles. 
Page 23 of 60
20LIMITED WARRANTY ON GENUINE INFINITI REPLACEMENT PARTS AND GENUINEINFINITI ACCESSORIES¹
WHAT IS NOT COVERED
This warranty does not cover:
1.  Tires or batteries. These items are covered by 
separate warranties.
2.   Normal maintenance service and parts 
replacement as outlined in the maintenance 
schedule of your Owner’s Manual.
3.   Damage or failures of parts resulting from:
•• Misuse (your Owner’s Manual is your 
guide to proper use).
•• Accident, theft, fire, driving through water resulting in engine water ingestion.
•• Chemical fallout, tree sap, salt, sand, hail, flood or other environmental conditions
•• Modification or improper repair of the part or of the vehicle in which the part is 
installed.
•• Use of parts not equivalent in quality or design to parts supplied by Infiniti.
•• Lack of performance of required maintenance services as outlined in your 
Owner’s Manual.
•• Use of improper or dirty fuel, fluids or lubricants.
•• Normal wear and tear, including dings, dents, chips or scratches. 4.  
Salvage Title. This warranty does not cover 
damage, failures or corrosion to any Infiniti 
replacement part, or Genuine Infiniti or 
Infiniti Accessory, installed in the vehicle, if 
the vehicle is issued a “salvage” or similar 
title including, but not limited to junk, scrap, 
rebuilt, or flooded titles, under any state’s 
law. This exclusion does not extend to new 
Genuine Infiniti replacement parts, Genuine 
Infiniti accessories, or Infiniti Performance 
Parts installed in/on an Infiniti vehicle after 
the issuance of a "salvage" or similar title. 
5.   Infiniti Performance Parts sold through 
Infiniti/Nissan Motorsports Group are 
sold "AS IS" without warranties, express or 
implied unless expressly prohibited from 
doing so by applicable law, in which case the 
warranty provided is the minimum required 
by law.
WHAT YOU MUST DO
In order to obtain warranty service you must 
deliver the warranted part or accessory, or 
the vehicles, on which the part or accessory 
is installed, to an authorized Infiniti retailer in 
the United States or Canada at your expense 
with proof of purchase (parts invoice or service 
repair order from an authorized Infiniti retailer). 
The names and addresses of authorized Infiniti 
retailers are listed in telephone directories.  You must also pay for labor charges to remove 
and replace the part or accessory if it was 
not originally installed on your vehicle by an 
authorized Infiniti retailer.
WHAT INFINITI WILL DO
If the part or accessory to be repaired was 
originally installed by an authorized Infiniti 
retailer, it will be removed and reinstalled 
after repair at no charge for parts and labor. 
If the part or accessory was not installed 
by an authorized Infiniti retailer, the part or 
accessory will be repaired or exchanged only. 
Any needed parts replacement will be made 
using Genuine Infiniti or Infiniti approved new 
or remanufactured parts. Infiniti reserves the 
right to make changes at any time, without 
notice, to production and service parts in their 
specifications, colors, and materials, including 
those used in connection with warranty 
repairs. For this reason, when approved by 
Infiniti and at Infiniti’s discretion, functionally 
equivalent replacement parts may be used that 
do not exactly match the original production 
part.
1 Actual warranty is provided by the retailer at time of purchase and should be read carefully. This warranty is subject to change and the applicable warranty will be that which is in effect on the date 
of purchase. 
Page 34 of 60
31
DON’T SPIN YOUR TIRES 
EXCESSIVELY 
Avoid excessive tire spinning when your 
vehicle is stuck in snow, ice, mud or sand. The 
centrifugal forces generated by a free-spinning 
tire/wheel assembly may cause sudden tire 
explosion resulting in vehicle damage and/or 
serious personal injury to you or a bystander. 
Never exceed 35 mph/55 km/h, as indicated 
on your speedometer. Use a gentle backward 
and forward rocking motion to free your 
vehicle for continued driving. Never stand near 
or behind a tire spinning at high speeds. For 
example, while attempting to push a vehicle 
that is stuck or when an on-the-car spin 
balance machine is in use.
DO CHECK YOUR TIRES FOR 
WEAR
Always remove tires from service when 
they reach two thirty-seconds of an inch 
(2/32) remaining tread depth. All new tires 
have treadwear indicators which appear as 
smooth banks in the tread grooves when they 
wear to the two thirty-seconds of an inch 
(2/32) level. Many wet weather accidents 
result from skidding on bald or nearly bald 
tires. Excessively worn tires are also more 
susceptible to penetrations. 
DO CHECK YOUR TIRES FOR 
DAMAGE 
Frequent (at least monthly) inspection of your 
tires for signs of damage and their general 
condition is important for safety. If you have any questions, have your tire Dealer inspect 
them. Impacts, penetrations, cracks, knots, 
bulges or air loss always require tire removal 
and expert inspection. Never perform a 
temporary repair or use an inner tube as a 
substitute for a proper repair. Only qualified 
persons should repair tires.
PROPER TIRE REPAIR NOTE: 
Goodyear and Dunlop do not warrant any 
inspection or repair process. The repair is 
entirely the responsibility of the repairer and 
should be made in accordance with established 
Rubber Manufacturers Association (RMA) 
procedures. 
TIRE PRESSURE MONITORING 
SYSTEM ALERT
Refer to your vehicle Owner’s Manual for more 
information on what to do if the tire pressure 
warning system activates.
THE CONVENIENCE 
(TEMPORARY) SPARE
The Convenience (Temporary) Spare is 
designed, built, and tested to the high 
engineering standards set by North America’s 
leading car manufacturers and to Goodyear 
and Dunlop’s own high standards of quality 
control. It is designed to take up a minimum 
of storage space and, at the same time, fulfill 
the function of a spare tire when needed. The 
spare is kept in its storage space, fully inflated 
at 60 psi. To be sure it is always ready for use, 
the air pressure should be checked on a regular 
basis. The Convenience (Temporary) Spare can be 
used in combination with the original tires 
on your vehicle. You can expect a tire tread 
life of up to 3,000 miles (4,800 kilometers), 
depending on road conditions and your driving 
habits. To conserve tire tread life, return the 
spare to the storage area as soon as it is 
convenient to have the standard tire repaired 
or replaced. 
The Convenience (Temporary) Spare weighs 
less than a standard tire so it’s easier to handle. 
It also helps reduce the total car weight which 
contributes to fuel economy. 
The wheels used with the Convenience 
(Temporary) Spare are specifically designed for 
use with high pressure spares and should never 
be used with any other type tire.
DON’T ATTEMPT TO MOUNT YOUR 
OWN TIRES 
Serious injury or Death may result from 
explosion of tire/rim assembly due to improper 
mounting procedures. Follow tire manufacturer’s 
instructions and match tire diameter to rim 
diameter. Mount light truck radials on rims 
approved for radial service. Do not apply bead 
sealer. This can inhibit bead seating. Lubricate 
beads and tire rim (including tube or flap) 
contact surfaces. Lock assembly on mounting 
machine or place in safety cage. STAND BACK 
and never exceed 40 psi to seat beads. Never 
use a volatile substance or a rubber “donut” (also 
known as a bead expander or “O-Ring”) to aid 
bead seating. Only specially-trained persons 
should mount tires.
GOODYEAR/DUNLOP TIRE LIMITED WARRANTY
(Continued on next page) 
Page 47 of 60
44
Never perform a temporary repair, use an 
innertube or inject sealant as a permanent 
substitute for a proper repair. Only qualified 
persons should repair tires. 
Be sure that all your valves have suitable valve 
caps. This will keep valve cores clean and clear 
and guard against leakage. 
REPAIRS - WHENEVER POSSIBLE, SEE 
A TIRE RETAILER AT ONCE.Some tire 
manufacturers do not warrant any inspection 
or repair process. The repair is entirely the 
responsibility of the repairer. Punctures in 
the tread of a passenger tire which do not 
exceed 1/4 of an inch (6mm) in diameter can 
usually be repaired by following the Rubber 
Manufacturer’s Association (RMA) Passenger 
and Light Truck Repair procedures. Contact 
the manufacturer of your tires for its position 
and assistance as to the acceptable location 
for a proper repair and the repair of speed 
rated tires. Do not use plug repairs. They may 
cause further damage to the tire. They are not 
always air tight and the plug may fail. Do not 
exceed posted speed limits on any repaired tire. 
Certain tire manufacturers speed ratings are 
voided if the tire is repaired.
Although a tire was properly repaired, internal 
structural damage resulting from the puncture 
may have occurred.
Sometime later the damage may cause the tire 
to be removed from service. 
If the tire has a puncture in the tread which 
exceeds 1/4 inch (6mm), the tire must be  replaced. If any tire has sustained a puncture, 
have the tire inspected internally by a tire 
retailer for possible damage that may have 
occurred. 
Improper mounting and inflation procedures 
can cause an explosion of the tire/rim 
assembly. Only specially trained persons should 
perform these tasks. Contact your tire store or 
retailer for assistance. 
CAUTION - Never, under any circumstance, 
introduce a flammable substance into a tire. 
WHEEL ALIGNMENT AND BALANCING 
Wheel alignment and balancing are important 
for safety and maximum mileage from your 
tires. Check how your tires are wearing at 
least once a month. If your tires are wearing 
unevenly, such as the inside shoulder of the 
tire wearing faster than the rest of the tread, 
or if you detect excessive vibration, your 
vehicle may be out of alignment or balance. 
These conditions not only shorten the life of 
your tires, but adversely affect the handling 
characteristics of your vehicle which could 
be dangerous. If you detect irregular wear or 
vibration, have your alignment and balance 
checked immediately. Tires which have been 
run underinflated will show more wear on the 
shoulders than in the center of the tread.
HARD BRAKING 
You must inspect your tires after any hard 
braking circumstances or after tires have slid 
on the pavement. This can cause a flat spot in 
a section of the tire tread. TIRE SPINNING 
Never spin your tires above a speedometer 
reading of 35 mph (55 km/h) if your vehicle 
becomes stuck. The centrifugal force 
generated by the free spinning tire/wheel 
assembly may cause a sudden tire explosion, 
resulting in vehicle damage and/or serious 
personal injury or death. Never allow anyone 
to stand near or behind a tire spinning at high 
speed while attempting to push a vehicle that 
is stuck. When in mud, sand, snow, ice or other 
slippery conditions, do not indulge in excessive 
wheel spin. In such conditions, with automatic 
transmission vehicles, by accelerating the 
engine excessively, it is possible to spin one of 
the drive tires beyond its speed capability. This 
is also true when balancing a drive tire/wheel 
assembly using the engine of the vehicle to 
spin the wheel. 
TIRE TREAD 
Tires must be replaced when the depth of 
the tread reaches 2/32 inch (1.6 mm). Tires 
are manufactured with tread wear indicators 
molded into the tire grooves which indicate 
tread wearout. As tires approximate 2/32 inch 
(1.6 mm) wearout, the tread gauge becomes 
thinner and more vulnerable to the effects 
of road hazards. Also, worn tires are more 
subject to hydroplaning, which can cause loss 
of control. Therefore, visual tire inspection 
becomes more crucial as the tires wear out. 
(Continued on next page)
IMPORTANT TIRE SAFETY INFORMATION¹