wheel INFINITI Q70 2019 Quick Reference Guide

2
Cockpit Overview
Dynamic Driver Assistance switch (if so equipped)
2 Intelligent Cruise Control (ICC) switches (if so equipped)
3 Wiper and washer switch
4Lo
rem ipsu m Trip computer controls and reset button (behind the steering wheel)
5 Vehicle information display
6 Paddle shifters
7 Instrument brightness control switch (behind the steering wheel)
8 Combined turn signal / headlight control switch
9 Menu control switches and audio control switches
10 Bluetooth® control switches and audio control switches

4
Instrument Panel
Multi-function control touch-screen / Around View® Monitor (AVM) display
2 Climate control panel • H eater and air conditioning (automatic)
•

F
ront/Rear window defroster
3 Multi-function control panel
4Lorem ipsu m Audio control panel
5 Shift lever
6 Push-button ignition system (behind the steering wheel)
7 Adaptive Front Lighting system switch (behind the steering wheel) (if so equipped)
8 Tilt/Telescopic steering wheel switch (behind the steering wheel)
9 Parking brake
10 Hood latch release
11 Lower switch bank
• Vehicle Dynamic Control (VDC)
OFF switch
•

T
runk release switch • R
ear sunshade switch (if so equipped)
•

W
arning Systems switch (if so equipped)
•


H
eated steering wheel switch

14
Move the lever up or down to one of
the following positions to operate the
windshield wipers:
MIST One sweep operation
OFF Wipers are OFF
AUTO Rain-sensing automatic wipe
LO Continuous wipe, slow
HI Continuous wipe, fast
To adjust the wiper sensitivity for the AUTO
setting, twist the control ring
2.
Pull the lever
toward you operate the
windshield washer.
To turn the rain-sensing automatic wiper
system off, push up the lever to the OFF
position, or pull down the lever to the LO or
HI position.
Wiper and Washer Switch
SYSTEM OPERATING TIPS
• The interior of the vehicle should be as quiet as possible.
• Speak naturally. Speaking too fast, too slow, too soft, or too loud makes voice recognition more difficult.
• Confirm that the correct voice commands are being used. Glance at the screen to see the currently
available commands.
USING THE VOICE RECOGNITION SYSTEM
• Press the
button on the steering wheel, and a
list of commands will appear on the screen.
• After the tone sounds, speak the command.
• To skip the voice prompt and give the command immediately, press the
button on the steering
wheel to interrupt the system. Speak the next
command after the tone sounds.
• To cancel the command, press and hold the
button
on the steering wheel.
Please see your INFINITI InTouch™ Owner’s Manual for important
safety information, system limitations, and additional operating and
feature information.
Voice Recognition
PULLING UP THE WIPER ARM
The wiper arm should be in the UP
position when replacing the wiper.
• With the shift lever in the P (PARK) position, place
the ignition switch in the
OFF position.
• Within 1 minute, push the wiper switch to the MIST
position twice. The wiper
operation stops in mid-
operation and the wiper arm
can be pulled up.
• To return the wiper arm, place the wiper arm in the DOWN
position and operate the wiper
switch once.
Please see your Owner’s Manual for important safety information, system limitations, and additional
operating and feature information.

2