high beam INFINITI QX30 2017 Quick Reference Guide

2
Cockpit Overview
1 Cruise control switch
2 Vehicle information and menu control switches
3 Combined turn signal/Low-High beam/Wiper and washer switch
4 Shift paddles
5 Audio and Bluetooth® control switches
6 Instrument Brightness Control (behind steering wheel)
For more information, refer to your Owner

10
Turn the switch 1 to one of the following positions to operate the
windshield wipers:
Continuous wipe, fast.
Continuous wipe, slow.
Automatic wipe, high rain sensor sensitivity.
Automatic wipe, low rain sensor sensitivity.
Wipers are OFF.
Press
2 to operate the windshield washer and wipers.
REAR WIPER AND WASHER
Turn the rear wiper switch
3 to one of the following positions to
operate the rear wipers (shown in the order they appear on the
wiper switch):
Wipes with washer fluid, then returns to
intermittent wiping.
Intermittent wiping.
Wipers are OFF.
Wipes with washer fluid, then returns to off.
Wiper and Washer Switch

2
1
3
1 Left-hand parking lights switched on.
2 Right-hand parking lights switched on.
3 Side lights, license plate lights and combination meter lighting switche\
d on.
4 Automatic headlight mode (headlights switch on/off automatically
depending on ambient light conditions/daytime light system) switched on\
.
5 Dipped beam/high beam headlights. Selection between dipped beam and
high beam is done using the combination switch (see hereafter).
6 Rear fog light switch
7 Front fog light switch
For normal headlight operation, leave the exterior light switch in the
AUTO position.
Exterior Light Operation
7
6
5 4 3
1
2
For more information, refer to your Owner