brake light INFINITI QX50 2021 Quick Reference Guide

8
Electronic Parking Brake
To apply the parking brake, pull the electric
parking brake switch
up, located below the
instrument panel, regardless of the ignition
switch position.
To release the parking brake, depress the brake
pedal and push the electric parking brake switch
down while the ignition is on. The parking
brake will be automatically released when you
depress the accelerator pedal as long as
certain conditions are met, such as having your
seatbelt fastened.
Please see your Owner’s Manual for important safety
information, system limitations, and additional operating and
feature information.
Two positions for the driver’s seat, steering column and outside mirrors can be stored in the
memory seat system. To set a memory position:
1. Place the ignition switch in the ON position. (The vehicle should be stopped while
setting the memory.)
2. Adjust the driver’s seat, steering column and outside mirrors to the desired positions
using the adjusting switches for each feature.
3. Push the SET switch
, and within 5 seconds,
push the memory switch (1 or 2)
. The
indicator light for the memory switch you select
will illuminate for approximately 5 seconds and
a chime will sound when the memory is stored.
The driver’s seat and steering column will
automatically move when the driver’s side door is
opened, to allow the driver to get in and out of the
driver’s seat more easily. “Lift Steering upon Exit” and “Slide Driver Seat Back on Exit” can
be adjusted in the lower touch-screen display under “Comfort & Convenience.”
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
Memory Seat (if so equipped)