window INFINITI QX56 2011 Factory Service Manual

PCS
DIAGNOSIS SYSTEM (IPDM E/R)PCS-13
< SYSTEM DESCRIPTION > [IPDM E/R]
C
D
E
F
G H
I
J
K L
B A
O P
N
ACTIVE TEST
Te s t i t e m
PUSH SW
[Off/On]
Displays the status of the push-button ignition switch judged by IPDM E/R.
INTER/NP SW
[Off/On] Displays the status of the shift position judged by IPDM E/R.
ST RLY CONT
[Off/On] Displays the status of the starter relay status signal received from BCM via CAN
communication.
IHBT RLY -REQ
[Off/On] Displays the status of the starter control relay signal received from BCM via CAN
communication.
ST/INHI RLY
[Off/ ST ON/INHI ON/UNKWN] Displays the status of the starter relay and starter control relay judged by IPDM
E/R.
DETENT SW
[Off/On] Displays the status of the A/T shift selector (detention switch) judged by IPDM E/
R.
S/L RLY -REQ
[Off/On] Displays the status of the steering lock relay signal received from BCM via CAN
communication.
S/L STATE
[LOCK/UNLK/UNKWN] Displays the status of the steering lock judged by IPDM E/R.
OIL P SW
[Open/Close] Displays the status of the oil pressure switch judged by IPDM E/R.
HOOD SW
[Off/On] Displays the status of the hood switch judged by IPDM E/R.
HL WASHER REQ
[Off/On] Displays the status of the headlamp washer request signal received from BCM via
CAN communication.
THFT HRN REQ
[Off/On] Displays the status of the theft warning horn request signal received from BCM
via CAN communication.
HORN CHIRP
[Off/On] Displays the status of the horn reminder signal received from BCM via CAN com-
munication.
Monitor Item
[Unit] MAIN SIG-
NALS Description
Test item Operation Description
CORNERING LAMP LH
NOTE:
This item is indicated, but cannot be tested.
RH
HORN On Operates horn relay for 20 ms.
REAR DEFOGGER Off OFF
On Operates the rear window defogger relay.
FRONT WIPER Off OFF
Lo Operates the front wiper relay.
Hi Operates the front wiper relay and front wiper high relay.
MOTOR FAN* 1OFF
2 Transmits 50% pulse duty signal (PWM signal) to the cooling fan control module.
3 Transmits 75% pulse duty signal (PWM signal) to the cooling fan control module.
4
Transmits 100% pulse duty signal (PWM signal) to the cooling fan control mod-
ule.
HEAD LAMP WASHER On Operates the headlamp washer relay for 1 second.
Revision: 2010 May2011 QX56

PCS
IPDM E/RPCS-17
< ECU DIAGNOSIS INFORMATION > [IPDM E/R]
C
D
E
F
G H
I
J
K L
B A
O P
N
TERMINAL LAYOUT
PHYSICAL VALUES
JPMIA1423ZZ
Te r m i n a l N O .
(Wire color) Description
Condition Va l u e
(Approx.)
Signal name Input/
Output
+–
1
(W) Ground Battery power supply Input Ignition switch OFF Battery voltage
2
(G) Ground Battery power supply Input Ignition switch OFF Battery voltage
3
(R) Ground Starter motor Output Ignition switch ON 0 V
At engine cranking Battery voltage
4
(L) Ground Battery power supply Input Ignition switch OFF Battery voltage
5
(P/L) Ground
Ignition relay power
supply OutputIgnition switch OFF or ACC 0 V
Ignition switch ON Battery voltage
7
(W/G) Ground
Ignition relay power
supply OutputIgnition switch OFF or ACC 0 V
Ignition switch ON Battery voltage
8
(W) Ground Battery power supply Input Ignition switch OFF Battery voltage
9
(B) Ground Ground — Ignition switch ON 0 V
14
(L) Ground Rear window defogger Output
Ignition switch
ONRear window defogger
switch OFF
0 V
Rear window defogger
switch ON Battery voltage
Revision: 2010 May2011 QX56

PCS
DIAGNOSIS SYSTEM (BCM)PCS-39
< SYSTEM DESCRIPTION > [POWER DISTRIBUTION SYSTEM]
C
D
E
F
G H
I
J
K L
B A
O P
N
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT-III Fu
nction (BCM - COMMON ITEM)INFOID:0000000006376369
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all sub system selection items.
×: Applicable item
*: This item is indicated, but not used.
FREEZE FRAME DATA (FFD)
The BCM records the following vehicle condition at the time a particular DTC is detected, and displays on
CONSULT-III.
Diagnosis mode Function Description
Work Support Changes the setting for each system function.
Self Diagnostic Result Displays the diagnosis results judged by BCM. Refer to BCS-57, "
DTCIndex".
CAN Diag Support Monitor Monitors the reception status of CAN communication viewed from BCM. Refer to CONSULT-III opera-
tion manual.
Data Monitor The BCM input/output signals are displayed.
Active Test The signals used to activate each device are forcibly supplied from BCM.
Ecu Identification The BCM part number is displayed.
Configuration  Read and save the vehicle specification.
 Write the vehicle specification when replacing BCM.
System Sub system selection item Diagnosis mode
Work Support Data Monitor Active Test
Door lock DOOR LOCK ×××
Rear window defo gger REAR DEFOGGER ××
Warning chime BUZZER ××
Interior room lamp timer INT LAMP ×××
Exterior lamp HEAD LAMP ×××
Wiper and washer WIPER ×××
Turn signal and hazard warning lamps FLASHER ×××
— AIR CONDITONER* ××
 Intelligent Key system
 Engine start system INTELLIGENT KEY
×××
Combination switch COMB SW ×
Body control system BCM ×
IVIS IMMU ×××
Interior room lamp battery saver BATTERY SAVER ×××
Back door TRUNK ×
Vehicle security system THEFT ALM ×××
RAP system RETAINED PWR ×
Signal buffer system SIGNAL BUFFER ××
Revision: 2010 May2011 QX56

PCS
DIAGNOSIS SYSTEM (BCM)PCS-43
< SYSTEM DESCRIPTION > [POWER DISTRIBUTION SYSTEM]
C
D
E
F
G H
I
J
K L
B A
O P
N
*: OFF is displayed when brake pedal is depressed while brake switch power supply is OFF.
ACTIVE TEST
PRMT RKE STRT
NOTE:
This item is displayed, but cannot be monitored
TRNK/HAT MNTR NOTE:
This item is displayed, but cannot be monitored
RKE-LOCK Indicates [On/Off] condition of LOCK signal from Intelligent Key
RKE-UNLOCK Indicates [On/Off] condition of UNLOCK signal from Intelligent Key
RKE-TR/BD NOTE:
This item is displayed, but cannot be monitored
RKE-PANIC Indicates [On/Off] condition of PANIC button of Intelligent Key
RKE-MODE CHG Indicates [On/Off] condition of MODE CHANGE signal from Intelligent Key
RKE OPE COUN1 When remote keyless entry receiver receives the signal transmitted while operating on Intelli-
gent Key, the numerical value start changing
RKE OPE COUN2 NOTE:
This item is displayed, but cannot be monitored
Monitor Item Condition
Test item Description
BATTERY SAVER This test is able to check interior room lamp operation
 On: Operate
 Off: Non-operation
OUTSIDE BUZZER This test is able to check Intelligent Key warning buzzer operation
 On: Operate
 Off: Non-operation
INSIDE BUZZER This test is able to check warning chime in combination meter operation
 Take Out: Take away warning chime sounds when CONSULT-III screen is touched
 Key: Key warning chime sounds when CONSULT-III screen is touched
 Knob: OFF position warning chime sounds when CONSULT-III screen is touched
 Off: Non-operation
INDICATOR This test is able to check warning lamp operation
 KEY ON: “KEY” Warning lamp illuminates when CONSULT-III screen is touched
 KEY IND: “KEY” Warning lamp blinks when CONSULT-III screen is touched
 Off: Non-operation
INT LAMP This test is able to check interior room lamp operation
 On: Operate
 Off: Non-operation
LCD This test is able to check meter display information
 Engine start information displays when “BP N” on CONSULT-III screen is touched
 Engine start information displays when “BP I” on CONSULT-III screen is touched
 Key ID warning displays when “ID NG” on CONSULT-III screen is touched
 Steering lock information displays when “ROTAT” on CONSULT-III screen is touched
 P position warning displays when “SFT P” on CONSULT-III screen is touched
 INSRT: This item is displayed, but cannot be monitored
 BATT: This item is displayed, but cannot be monitored
 Take away through window warning displays when “NO KY” on CONSULT-III screen is
touched
 Take away warning displa y when “OUTKEY” on CONSUL T-III screen is touched
 OFF position warning display when “LK WN” on CONSULT-III screen is touched
FLASHER This test is able to check security hazard lamp operation
The hazard lamps are activated after “LH/RH/Off” on CONSULT-III screen is touched
P RANGE This test is able to check A/T shift selector power supply
 On: Operate
 Off: Non-operation
ENGINE SW ILLUMI This test is able to check push-button ignition switch illumination operation
Push-ignition switch illumination illuminates when “ON” on CONSULT-III screen is touched
Revision: 2010 May2011 QX56

PWC-1
BODY EXTERIOR, DOORS, ROOF & VEHICLE SECURITY
C
D
E
F
G H
I
J
L
M
SECTION PWC
A
B
PWC
N
O P
CONTENTS
POWER WINDOW CONTROL SYSTEM
PRECAUTION ................ ...............................4
PRECAUTIONS .............................................. .....4
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ............................................................. ......
4
Precaution Necessary for Steering Wheel Rota-
tion after Battery Disconnect .....................................
4
SYSTEM DESCRIPTION ..............................6
COMPONENT PARTS ................................... .....6
Component Parts Location ................................ ......6
Component Description .............................................7
SYSTEM ..............................................................8
System Diagram ................................................. ......8
System Description ...................................................8
Fail-safe ..................................................................10
DIAGNOSIS SYSTEM (BCM) ............................11
COMMON ITEM ..................................................... ....11
COMMON ITEM : CONSULT-III Function (BCM -
COMMON ITEM) .....................................................
11
RETAIND PWR ...................................................... ....12
RETAIND PWR : CONSULT-III Function (BCM -
RETAINED PWR) ...................................................
12
ECU DIAGNOSIS INFORMATION ..............13
BCM (BODY CONTROL MODULE) ............... ....13
List of ECU Reference ........................................ ....13
POWER WINDOW MAIN SWITCH ....................14
Reference Value ................................................. ....14
Fail-safe ..................................................................15
FRONT POWER WINDOW SWITCH (PAS-
SENGER SIDE) ..................................................
16
Reference Value ................................................. ....16
Fail-safe ..................................................................17
REAR POWER WINDOW SWITCH LH ............18
Reference Value .................................................. ....18
Fail-safe ...................................................................19
REAR POWER WINDOW SWITCH RH ............20
Reference Value ......................................................20
Fail-safe ...................................................................21
WIRING DIAGRAM ......................................22
POWER WINDOW SYSTEM .............................22
Wiring Diagram .................................................... ....22
BASIC INSPECTION ...................................30
DIAGNOSIS AND REPAIR WORKFLOW ........30
Work Flow ............................................................ ....30
ADDITIONAL SERVICE WHEN REMOVING
BATTERY NEGATIVE TERMINAL ...................
31
Description ...............................................................31
Work Procedure .......................................................31
ADDITIONAL SERVICE WHEN REPLACING
CONTROL UNIT ................................................
32
Description ...............................................................32
Work Procedure .......................................................32
SYSTEM INITIALIZATION ................................33
Description ........................................................... ....33
Work Procedure .......................................................33
CHECK ANTI-PINCH FUNCTION .....................34
Description ...............................................................34
Work Procedure .......................................................34
DTC/CIRCUIT DIAGNOSIS .........................35
POWER SUPPLY AND GROUND CIRCUIT ....35
POWER WINDOW MAIN SWITCH ........................ ....35
POWER WINDOW MAIN SWITCH : Diagnosis
Procedure ................................................................
35
Revision: 2010 May2011 QX56

PWC-2
FRONT POWER WINDOW SWITCH (PASSEN-
GER SIDE) ................................................................
36
FRONT POWER WINDOW SWITCH (PASSEN-
GER SIDE) : Diagnosis Procedure .........................
36
REAR POWER WINDOW SWITCH ....................... ...37
REAR POWER WINDOW SWITCH : Diagnosis
Procedure ...............................................................
37
POWER WINDOW MOTOR ...............................39
DRIVER SIDE ......................................................... ...39
DRIVER SIDE : Component Function Check .........39
DRIVER SIDE : Diagnosis Procedure ....................39
PASSENGER SIDE ................................................ ...39
PASSENGER SIDE : Component Function Check
...
40
PASSENGER SIDE : Diagnosis Procedure ........ ...40
REAR LH ................................................................ ...40
REAR LH : Component Function Check ................41
REAR LH : Diagnosis Procedure ............................41
REAR RH ............................................................... ...41
REAR RH : Component Function Check ................41
REAR RH : Diagnosis Procedure ...........................42
ENCODER .........................................................43
DRIVER SIDE ......................................................... ...43
DRIVER SIDE : Component Function Check .........43
DRIVER SIDE : Diagnosis Procedure ....................43
PASSENGER SIDE ................................................ ...45
PASSENGER SIDE : Component Function Check
...
45
PASSENGER SIDE : Diagnosis Procedure ........ ...45
REAR LH ................................................................ ...47
REAR LH : Component Function Check ................47
REAR LH : Diagnosis Procedure ............................47
REAR RH ............................................................... ...49
REAR RH : Component Function Check ................49
REAR RH : Diagnosis Procedure ...........................50
DOOR KEY CYLINDER SWITCH ......................53
Component Function Check ................................ ...53
Diagnosis Procedure ..............................................53
Component Inspection ............................................54
POWER WINDOW SERIAL LINK .....................55
POWER WINDOW MAIN SWITCH ........................ ...55
POWER WINDOW MAIN SWITCH : Component
Function Check .......................................................
55
POWER WINDOW MAIN SWITCH : Diagnosis
Procedure ...............................................................
55
FRONT POWER WINDOW SWITCH (PASSEN-
GER SIDE) ............................................................. ...
56
FRONT POWER WINDOW SWITCH (PASSEN-
GER SIDE) : Component Function Check ..............
56
FRONT POWER WINDOW SWITCH (PASSEN-
GER SIDE) : Diagnosis Procedure .........................
56
REAR POWER WINDOW SWITCH LH .................. ...57
REAR POWER WINDOW SWITCH LH : Compo-
nent Function Check ...............................................
58
REAR POWER WINDOW SWITCH LH : Diagno-
sis Procedure ..........................................................
58
REAR POWER WINDOW SWITCH RH ................. ...59
REAR POWER WINDOW SWITCH RH : Compo-
nent Function Check ...............................................
59
REAR POWER WINDOW SWITCH RH : Diagno-
sis Procedure ..........................................................
59
SYMPTOM DIAGNOSIS ............................61
POWER WINDOWS DO NOT OPERATE
WITH POWER WINDOW MAIN SWITCH ...... ...
61
Diagnosis Procedure ............................................ ...61
DRIVER SIDE POWER WINDOW ALONE
DOES NOT OPERATE ......................................
62
Diagnosis Procedure ............................................ ...62
FRONT PASSENGER SIDE POWER WIN-
DOW DOES NOT OPERATE ............................
63
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED ................................................................. ...
63
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED : Diagnosis Procedure .............................
63
WHEN FRONT POWER WINDOW SWITCH (PAS-
SENGER SIDE) IS OPERATED ............................. ...
63
WHEN FRONT POWER WINDOW SWITCH
(PASSENGER SIDE) IS OPERATED : Diagnosis
Procedure ...............................................................
63
WHEN BOTH POWER WINDOW MAIN SWITCH
AND FRONT POWER WINDOW SWITCH ARE
OPERATED ............................................................ ...
63
WHEN BOTH POWER WINDOW MAIN SWITCH
AND FRONT POWER WINDOW SWITCH ARE
OPERATED : Diagnosis Procedure ........................
63
REAR LH SIDE POWER WINDOW ALONE
DOES NOT OPERATE ......................................
64
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED ................................................................. ...
64
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED : Diagnosis Procedure .............................
64
WHEN REAR POWER WINDOW SWITCH LH IS
OPERATED ............................................................ ...
64
WHEN REAR POWER WINDOW SWITCH LH IS
OPERATED : Diagnosis Procedure ........................
64
Revision: 2010 May2011 QX56

PWC-3
C
DE
F
G H
I
J
L
M A
B
PWC
N
O P
WHEN BOTH POWER WINDOW MAIN SWITCH
AND REAR POWER WINDOW SWITCH LH ARE
OPERATED ...........................................................
....
64
WHEN BOTH POWER WINDOW MAIN SWITCH
AND REAR POWER WINDOW SWITCH LH ARE
OPERATED : Diagnosis Procedure ........................
64
REAR RH SIDE POWER WINDOW ALONE
DOES NOT OPERATE .......................................
65
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED ................................................................ ....
65
WHEN POWER WINDOW MAIN SWITCH IS OP-
ERATED : Diagnosis Procedure .............................
65
WHEN REAR POWER WINDOW SWITCH RH IS
OPERATED ........................................................... ....
65
WHEN REAR POWER WINDOW SWITCH RH IS
OPERATED : Diagnosis Procedure ........................
65
WHEN BOTH POWER WINDOW MAIN SWITCH
AND REAR POWER WINDOW SWITCH RH ARE
OPERATED ........................................................... ....
65
WHEN BOTH POWER WINDOW MAIN SWITCH
AND REAR POWER WINDOW SWITCH RH ARE
OPERATED : Diagnosis Procedure ........................
65
AUTO OPERATION DOES NOT OPERATE
BUT MANUAL OPERATE NORMALLY ............
66
DRIVER SIDE ........................................................ ....66
DRIVER SIDE : Diagnosis Procedure .....................66
PASSENGER SIDE ...................................................66
PASSENGER SIDE : Diagnosis Procedure ........ ....66
REAR LH ............................................................... ....66
REAR LH : Diagnosis Procedure ............................66
REAR RH ............................................................... ....67
REAR RH : Diagnosis Procedure ............................67
ANTI-PINCH FUNCTION DOES NOT OPER-
ATE ....................................................................
68
Diagnosis Procedure ........................................... ....68
POWER WINDOW RETAINED POWER
FUNCTION DOES NOT OPERATE NORMAL-
LY ......................................................................
69
Diagnosis Procedure ...............................................69
DOOR KEY CYLINDER SWITCH DOES NOT
OPERATE POWER WINDOWS ........................
70
Diagnosis Procedure ...............................................70
KEYLESS POWER WINDOW DOWN DOES
NOT OPERATE .................................................
71
Diagnosis Procedure ...............................................71
POWER WINDOW LOCK SWITCH DOES
NOT FUNCTION ................................................
72
Diagnosis Procedure ...............................................72
POWER WINDOW SWITCH DOES NOT IL-
LUMINATE ........................................................
73
DRIVER SIDE ......................................................... ....73
DRIVER SIDE : Diagnosis Procedure .....................73
PASSENGER SIDE ....................................................73
PASSENGER SIDE : Diagnosis Procedure ........ ....73
REAR LH ................................................................ ....73
REAR LH : Diagnosis Procedure .............................73
REAR RH ............................................................... ....73
REAR RH : Diagnosis Procedure ............................73
REMOVAL AND INSTALLATION ...............74
POWER WINDOW MAIN SWITCH ...................74
Removal and Installation ..................................... ....74
Revision: 2010 May2011 QX56

PWC-6
< SYSTEM DESCRIPTION >
COMPONENT PARTS
SYSTEM DESCRIPTION
COMPONENT PARTS
Component Parts LocationINFOID:0000000006217264
1. BCMRefer to BCS-4, "
BODY CONTROL
SYSTEM : Componen t Parts Loca-
tion"
2. Front power window motor (driver
side) 3. Power window main switch
4. Front door lock assembly (driver side) (door key cylinder switch) 5. Front door switch (driver side) 6. Rear power window motor LH
7. Rear power window switch LH 8. Remote keyless entry receiver Refer to DLK-11, "
DOOR LOCK
SYSTEM :
ComponentPartsLocation"
A. View with front door finisher removed B. View with rear door finisher removed
JMKIA5275ZZ
Revision: 2010 May2011 QX56

COMPONENT PARTSPWC-7
< SYSTEM DESCRIPTION >
C
DE
F
G H
I
J
L
M A
B
PWC
N
O P
Component DescriptionINFOID:0000000006217265
Component Function
BCM  Supplies power supply to power window switch.
 Controls retained power.
Power window main switch  Directly controls all power window motor of all doors.
 Controls anti-pinch operation of power window.
Front power window switch
(passenger side)  Controls anti-pinch operation of power window.
 Controls power window motor of passenger door.
Rear power window switch  Controls anti-pinch operation of power window.
 Controls power window motor of rear right and left doors.
Power window motor  Integrates the ENCODER and WINDOW MOTOR.
 Starts operating with signals from each power window switch.
 Transmits power window motor rotation as a pulse signal to power window switch.
Remote keyless entry receiver Receives lock/unlock signal from the intelligent key, and then transmits to BCM.
Front door lock assembly (door key cyl-
inder switch) Transmits operation condition of door key cylinder switch to power window main switch.
Front door switch (driver side/passen-
ger side) Front door open/close condition and transmits to BCM.
Revision: 2010 May2011 QX56

PWC-8
< SYSTEM DESCRIPTION >
SYSTEM
SYSTEM
System DiagramINFOID:0000000006217266
System DescriptionINFOID:0000000006217267
POWER WINDOW OPERATION
 Power window system is activated by power window switch operation when ignition switch turns ON, or dur-
ing the retained power operation after ignition switch turns OFF.
 Power window main switch can open/close door glass.
 Front and rear power window switch can open/close the corresponding door glass.
 Power window lock switch can lock all power windows other than driver seat.
 All power windows close when pressing Intelligent Ke y lock button or unlock button for 3 seconds.
 If door glass receives resistance that is the specifi ed value or more while power window of each seat is in
AUTO-UP operation, power window operates in the reverse direction.
 Power window serial link transmits the signals from power window main switch to each power window switch.
 AUTO-UP/DOWN operation can be performed when front power window switch turns to AUTO.
POWER WINDOW AUTO-OPERATION
 AUTO-UP/DOWN operation can be performed when each power window motor turns to AUTO.
 Encoder continues detecting the movement of power window motor and output the encoder pulse signal to
power window switch while power window motor is operating.
 Power window switch reads the changes of encoder signal and stops AUTO operation when door glass is at
fully opened/closed position.
 Power window motor is operable in case encoder is malfunctioning.
 AUTO function does not operate if encoder is malfunctioning.
POWER WINDOW SERIAL LINK
Power window main switch, front power window switch (passenger side), rear power window switch LH/RH
and BCM transmit and receive the signal by power window serial link.
JMKIA5147GB
Revision: 2010 May2011 QX56