seat memory INFINITI QX60 2014 Quick Reference Guide

first drive features
3RD Row Manual Reclining Seatback
To recline the seatback, pull up on the latch 01
located on the outside corner of each seatback.




Lean back until the desired angle is obtained.


To bring the seatback forward again, pull up on the
latch
01 and move your body forward. The
seatback will move forward.
For more information, refer to the “Safety — seats, seat belts and
supplemental restraint system (section 1)” of your Owner’s Manual.
Automatic Drive Positioner (if so equipped)
Two positions for the driver’s seat, steering column



and outside mirrors can be stored in the automatic



drive positioner 01 memory.
Follo
w these procedures to set the
memory positions:


• Confirm the shift lever is in the P (PARK) position.
• Push
the ignition switch to the ON position.
• Adjust
the driver’s seat, steering column and



outside mirrors to the desired positions using the



adjusting switches for each feature.


•
Push
the SET switch and within 5 seconds, push the memory switch (1 or 2) for at least
1 second.
• The
indicator light on the memory switch you select will illuminate for approximately




5 seconds, and a chime will sound (if so equipped) when memory is stor\
ed correctly.


• The driver’s seat, steering column and outside mirror positions are now set to




your preference.
These memorized positions can also be linked to your INFINITI Intelligen\
t Key.
For more information, refer to the “Pre-driving checks and adjustments (section 3)” of your Owner’s Manual.
Outside Mirror Control Switch
To select the right or left side mirror, move the
control switch
01 right or left.
Adju
st each mirror to the desired position using
the switch
02.
To fold the outside rearview mirrors, push the
switch
03 to the
position. To unfold the
outside rearview mirrors, push the switch
03 to
the
position.
02
01
03
01
01
14
1591599_14b_Infiniti_QX60_QRG_100913.indd 1410/9/13 11:09 AM