lights INFINITI QX80 2014 Quick Reference Guide

2*Infiniti Connection™ is only available on vehicles equipped with optional Infiniti Connectio\
n™ subscription service.
INFINITI Connection™ System* (if so equipped)
Infiniti Connection™ combines personalized convenience
and concierge settings and personal security features
to compliment the Total Ownership Experience.
For more details on Infiniti Connection
™, or to enroll
your vehicle, please visit www.Infiniticonnection.com
or call 855-444-7244.
Available services include:
Infiniti Personal Assistant – To access Infiniti Personal

Assistant, select “Connect to Voice Menu” from the Infiniti Connection menu or touch the

key on the map screen. At the voice prompt, say “Infiniti Personal As\
sistant” to be connected.
•


Your Infiniti Personal Assistant can send destination information direct\
ly to your vehicle.


Automatic Collision Notification – In case of air bag deployment, a s\
ignal is sent containing

the vehicle location and customer information to a Response Specialist w\
ho notifies the
proper authorities.
Emergency Call – This service provides emergency

assistance by connecting subscriber to an Infiniti
Connection
™ Specialist.
•


In case of an emergency, press the in-vehicle

telematics SOS

button
01.
•


A Response Specialist will provide assistance based

on the situation described by the vehicle’s occupant.
Enhanced Roadside Assistance – Roadside Assistance can be accessed by\
touching the Infiniti

Connection™ key on the Info menu, the key on the map screen or by pressing the SOS button. •
This service allows subscribers to receive assistance for a non-emergenc\
y incident such

as towing or a third party response.
•


If warranted, Roadside Assistance may also be used in conjunction with t\
he Emergency


Assistance service by pressing the SOS button.
My Schedule – Access your personal online Google Calendar™, hear details read via

text-to-speech** and select locations as a destination via the navigatio\
n system.
Report Stolen Vehicle – A Response Specialist will attempt to obtain \
location information

from a reported stolen vehicle and provide that information to local law\
enforcement
agencies to assist in the recovery of your stolen vehicle.
Remote Door Lock/Unlock – Remotely access your vehicle via Infiniti C\
onnection Response

Specialist or designated website to remotely lock or unlock your vehicle\
.
Alarm Notification – This system will notify you when the factory-ins\
talled vehicle alarm

system has been activated.
Scheduled Maintenance Notification – Receive scheduled maintenance no\
tifications based

on mileage data provided by your vehicle.
Maintenance Alert – Receive notification of a vehicle system malfunct\
ion that triggers

instrument panel warning lights.
Destination Assistance – Receive point-of-interest assistance via gui\
ded IVR (Interactive

Voice Response), or Response Specialist by pressing the
key on the map screen, or
Infiniti Connection™ web portal.
01
new system features
1591592_14b_Infiniti_QX80_QRG_093013.indd 29/30/13 9:35 AM

5
Tire Pressure Monitoring System (TPMS) with Tire Inflation Indicator
A CHECK TIRE PRESSURE warning message will appear
in the vehicle information display
01 and the low tire
pressure warning light 02 will illuminate when one or
more tires are low on pressure and air is needed.



•


The tire pressures should be

checked when the tires are cold.
The tires are considered cold after
the vehicle has been parked for 3
hours or more or driven less than 1
mi (1.6 km) at moderate speeds.
When adding air to an under-inflated tire, the TPMS
with Tire Inflation Indicator provides visual and
audible signals to help you inflate the tires to the
recommended COLD tire pressure.
To use the Tire Inflation Indicator:



1.

Move the shift lever to the
P (PARK) position and
apply the parking brake.



2.

Place the ignition switch in the
ON position. Do not start the engine.



3.

Add air to the under-inflated tire and within a few seconds, the hazard \
warning lights

will start flashing.



4.

When the designated tire pressure is reached, the horn will beep once an\
d the hazard

warning flashers will stop.



5.

Repeat this procedure for any additional under-inflated tires.
After tire pressures are adjusted, drive the vehicle at s peeds above 16 MPH (25 km/h). The
CHECK TIRE PRESSURE warning message and low tire pressure warning light will disappear.
When the low tire pressure warning light flashes for approximately 1 min\
ute and then remains
on, the TPMS is not functioning properly. Have the system checked by an \
INFINITI retailer.
Tire pressure rises and falls depending on the heat caused by the vehicl\
e’s operation and
the outside temperature. Low outside temperature can lower the temperature of the ai\
r inside
the tire, which can cause a lower tire inflation pressure. This may caus\
e the low tire pressure
warning light to illuminate. If the warning light illuminates, check the\
tire pressure in your tires.
•

Check the tire pressure (including the spare tire) often and always pr\
ior to long distance trips.
The Tire and Loading Information label contains valuable information. Pl\
ease refer to section 9,
“Technical and consumer information” in your Owner’s Manual for\
the location of the
Tire and Loading Information label.
For more information, refer to the “Instruments and controls (section 2)” , “Starting and driving (section 5)” and the “Maintenance and
do-it-yourself (section 8)” of your Owner’s Manual.
02
01
essential information
1591592_14b_Infiniti_QX80_QRG_093013.indd 59/30/13 9:35 AM

8
first drive features
INFINITI Intelligent Key System
The INFINITI Intelligent Key system allows you to lock
or unlock your vehicle, open your liftgate and start the
engine. It is important to make sure the Intelligent Key
is with you (that is, in your pocket or purse).
REMOTE ENGINE START*
The remote engine start system must be enabled in
the vehicle settings within the vehicle information display.
The remote engine start operating range is approximately
200 ft (60 m) from the vehicle. The effective operating range
may be shorter due to environmental conditions or obstacles
between you and the vehicle.
For the remote engine start to function, the vehicle must be
in the P (PARK) position with the ignition off, and all the doors
closed and locked.
To start your vehicle remotely:



1.

Press the button
02
2. Within 5 seconds press and hold the remote engine start

button
06 for at least 2 seconds.

The engine will start and the parking lights will turn on.
Automatic climate control will begin heating or cooling the vehicle depe\
nding on the
last used mode.
The engine will run for 10 minutes and then turn off.
Repeat steps 1 and 2 to extend the time for an additional 10 minute peri\
od.
•


After two remote starts the ignition switch must be cycled before the re\
mote start can


be used again.
To start driving depress the brake pedal and push the ignition switch START/STOP button.
To lock the vehicle, push either door handle request switch 01 once or press the button
02 on the key fob.
To unlock the vehicle, perform one of the following procedures:



•

Push either door handle request switch 01 once; the corresponding door will unlock. Push
the door handle request switch
01 again within 1 minute; all other doors will unlock, or



•


Press the button 03 on the key fob to unlock the driver’s side door. Press the button
again; all other doors will unlock.
To open the liftgate, press the button 04 for more than 1 second.
The Intelligent Key can also be used to activate the panic alarm by pres\
sing and holding
the
button 05 for more than 1 second. Once activated, the panic alarm and headlights
will stay on for a period of time.
01
06
02
03
04
05
1591592_14b_Infiniti_QX80_QRG_093013.indd 89/30/13 9:35 AM

14
first drive features
Headlight Control
HEADLIGHT CONTROL
Turn the headlight control switch to the
position
01 to turn on the front parking, side marker,
tail, license plate and instrument panel lights.
Turn the switch to the
position 02 to turn on
the headlights.
AUTOLIGHT SYSTEM
The autolight system will automatically turn the headlights on when it i\
s dark and off when it
is light. The system will keep the headlights on for a period of time af\
ter you turn the ignition
off and all doors are closed.
To activate the autolight system, turn the headlight control switch to t\
he AUTO position 03
then push the ignition switch to ON. To deactivate the autolight system, turn the headlight
control switch to the OFF,
position 01 or position 02.
HIGH BEAM SELECT
Push the headlight control switch forward 04 to
select the high beam function. The blue indicator
light
illuminates in the instrument panel. Pull the
headlight switch back to the original position to select
the low beam. The blue indicator light extuiguishes.
Pull and release the headlight control switch 05 to
flash the headlight high beams on and off.
FOG LIGHT SWITCH
The headlights must be on and the low beams



selected for the fog lights to operate.
Turn the switch (inside collar) to the position 06
to turn the fog lights on.
Turn the switch (inside collar) to the OFF position to turn the fog lights off.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.
01
02
03
04
05
06
1591592_14b_Infiniti_QX80_QRG_093013.indd 149/30/13 9:36 AM

20
first drive features
Intelligent Cruise Control (ICC) System (if so equipped)
The Intelligent Cruise Control (ICC) system
automatically maintains a selected distance from
the vehicle traveling in front of you according to that
vehicle’s speed (up to the set speed) or at the set
speed when the road ahead is clear.
This system may not function properly due to
road conditions when direct sunlight, rain, mud,
snow or other road spray cause the sensor to
become blocked.
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE
To set Vehicle-To-Vehicle Distance Control mode,
press the CRUISE ON/OFF button
01 for less than 1.5
seconds. The indicator light
02 will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch 03 and release it. Cruise control
will be set to the desired speed.
Press the distance button 04 repeatedly to change the set distance
between long, middle, and short.
When a vehicle is not detected ahead of you in the lane, the set distanc\
e and set vehicle
speed indicator lights will illuminate
05 in set mode.
When a vehicle is detected ahead of you in the lane, t he vehicle ahead detection, set
distance, and set vehicle speed indicator lights will illuminate
06 in set mode.
TO SET CONVENTIONAL FIXED SPEED CRUISE CONTROL MODE:
While cruise control is off, press the CRUISE ON/OFF button and hold it down for more than
1.5 seconds. The CRUISE indicator light will illuminate.
Accelerate to the desired speed.
Push down on the COAST/SET switch and release it. The SET indicator light will illuminate.
Cruise control should be set to the desired speed.
TO SWITCH BETWEEN THE TWO CRUISE CONTROL MODES:
When one of the two cruise modes is in use, you must turn the system off\
, and then turn it
on again to select the other cruise control mode.
For more information, refer to the “Starting and driving (section 5)” of your Owner’s Manual.
03
01
04
0205
06
1591592_14b_Infiniti_QX80_QRG_093013.indd 209/30/13 9:36 AM

25
HomeLink® Universal Transceiver
The HomeLink system can learn and consolidate
the functions of up to 3 different hand-held
transmitters, operating items such as garage

doors, property gates, outdoor and indoor lights
or alarm systems.
To program the HomeLink® Universal Transceiver:



•


Position the handheld transceiver 1-3 in (26-76
mm) away from the HomeLink surface, keeping
the HomeLink indicator light in view.



•


Press and hold the desired HomeLink button and the handheld transmitter \
button
simultaneously until the HomeLink indicator light flashes slowly and the\
n rapidly.



•


Both buttons may be released when the indicator light flashes rapidly.
To verify the programing is complete, press and hold the HomeLink and ob\
serve the
indicator light:



•

A solid continuous light indicates the programing is complete and the Ho\
meLink button
will activate your device.



•

A blinking light that turns to a solid continuous light after 2 seconds \
indicates
additional steps are required to complete the programing.
An additional person may make the remaining steps easier. To complete the
programing process:



•

At the receiver of the device that you are programing to the HomeLink, p\
ress and
release the “learn” or “smart” button (the name may vary by\
manufacturer but it is
usually located near where the hanging antenna wire is attached to the u\
nit). You have
approximately 30 seconds to initiate the following step.



•

Press and hold the programmed HomeLink button for 2 seconds and release.\
You may have to repeat the previous 2 steps up to 3 times to complete th\
e programming
process. HomeLink should now activate your device.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual, the HomeLink website at
www.homelink.com or call 1-800-355-3515.
HOMELINK
1591592_14b_Infiniti_QX80_QRG_093013.indd 259/30/13 9:36 AM