wipers INFINITI QX80 2016 Quick Reference Guide

16
first drive features
Wiper and Washer Switch
Move the lever to one of the following positions to operate the windshie\
ld wipers:
1 Mist (MIST) — One sweep operation of the
front wipers.
2 Auto (AUTO) — Operates the rain-sensing
wipers intermittently. To increase or decrease
wiper sensitivity, twist the control ring
3.
4 Low (LO) — Front wipers operate at a continuous
low-speed.
5 High (HI) — Front wipers operate at a
continuous high-speed.
6 Pull the lever toward you to activate the
front washer. The front wipers will operate
several times.
REAR WIPER AND WASHER
7 Intermittent (INT) — Rear wiper
operates intermittently.
8 Low (ON) — Rear wiper operates at a
continuous low-speed.
9 Push the lever forward to activate the
rear washer. The rear wiper will operate
several times.
For more information, refer to the “Instruments and controls (section 2)”
of your Owner’s Manual.
INT 7
ON 8
3
1
2
4
5
MIST
OFF
AUTO LOHI
6
9
LANE CHANGE SIGNAL
Move the lever up or down until the turn signal begins to flash but the \
leve r does not latch
to signal a lane change. Hold the lever until the lane change is complet\
ed.
Move the lever up or down until the turn signal begins to flash but the \
lever does not latch
and release the lever. The turn signal will automatically flash 3 times.\

Choose the appropriate method to signal a lane change based on the road \
and
traffic conditions.
For more information, refer to the “Instruments and controls (section 2)” of your Owner’s Manual.