steering INFINITI QX80 2017 Quick Reference Guide

4
Instrument Panel
1 Multi-function touch-screen/RearView Monitor display/Around View® Monitor display
2 Infiniti multi-function controller
3 Audio system
4 Climate control panel
5 2nd row seat release buttons
6 Seat heating (if so equipped)
7 Steering wheel heater
8 Shift lever
9 Drive mode switch
10 Parking brake
11 Switch panel
• Power liftgate button
• Safety Shield OFF switch
• Blind Spot/RCTA OFF switch (if so equipped)
• Power Liftgate ON/OFF switch

7
Cruise Control (if so equipped)
To activate the cruise control, push the ON/OFF switch 1 on the
steering wheel.
To set a cruising speed, accelerate the vehicle to the desired speed,
push the switch 2 on the steering wheel down toward COAST/SET
and release.
To reset at a faster cruising speed, push and hold the switch 3 up
toward ACCEL/RES. When the vehicle attains the desired speed, release
the switch.
To cancel the preset speed, tap the brake pedal or push the
CANCEL switch 4. To turn off cruise control, push the ON/OFF switch 1.
VEHICLE-TO-VEHICLE DISTANCE CONTROL MODE(if so equipped)
• Press the vehicle-to-vehicle distance button 5 on the steering wheel
repeatedly to change the set distance.
• When a vehicle is not detected ahead, the set distance and set vehicle
speed indicator lights will illuminate 6 in set mode. • When a vehicle is detected ahead, the vehicle ahead detection, set
distance and set vehicle speed indicator lights will illuminate 7 in
set mode.
TO USE CONVENTIONAL (FIXED SPEED) CRUISE CONTROL MODE
(if so equipped)
• While cruise control is off, push and hold the ON/OFF switch 1 on the
steering wheel for more than 1.5 seconds. The CRUISE indicator light
will illuminate.
• Accelerate to the desired speed. • Push the switch 2 down toward COAST/SET and release it. The SET
indicator light will illuminate.
Please see your Owner’s Manual for important safety information, syst\
em limitations, and additional
operating and feature information.
5
4
3
2
1
67

12
Clock Set/Adjustment
DIGITAL CLOCK WITH NAVIGATION
To adjust the time and the appearance of the
clock on the display:
1. Press the SETTING button on the
control panel.
2. Select the “Others” key.
3. Select the “Clock” key.
ANALOG CLOCK
To set the clock forward, press the button
1.
To set the clock backward, press the
button
2.
Please see your Owner’s Manual for important safety
information, system limitations, and additional operating and
feature information.

1 2
SYSTEM OPERATING TIPS
• The interior of the vehicle should be as quiet
as possible.
• Speak naturally. Speaking too fast, too slow,
too soft, or too loud makes voice recognition
more difficult.
• Confirm that the correct voice commands are being
used. Glance at the screen to see the currently
available commands.
USING THE VOICE RECOGNITION SYSTEM
• Press the button 1 on the steering wheel, and a
list of commands will appear on the screen.
• After the tone sounds, speak the command.
• To skip the voice prompt and give the command
immediately, press the button 1 on the steering
wheel to interrupt the system. Speak the next
command after the tone sounds.
• To cancel the command, press and hold the button 1 on the steering wheel.
Please see your Owner’s Manual for important safety information, syst\
em
limitations, and additional operating and feature information.
Voice Recognition

1

15
All power windows can be operated through the
main switch on the driver’s door.
1 Power windows open/close
2 Disable passengers’ window operation
POWER WINDOW CONVENIENCE OPENING/
CLOSING FEATURE
The power windows can be opened from outside
the vehicle using the Intelligent Key as follows:
To unlock the vehicle and open the windows
simultaneously, press and hold the
button 3 on
the Intelligent Key for about 3 seconds after
the door is unlocked.
To stop opening, release the
button 3.
The window cannot be closed using the
Intelligent Key.

Using the mechanical key:
Insert the mechanical key and turn the driver’s
door key cylinder to the rear of the vehicle for
longer than 1 second. The door is unlocked and
the window keeps opening while turning the key.
To close the windows, turn the driver’s door key
cylinder to the front of the vehicle for longer
than 1 second. The door is locked and the
window keeps closing while turning the key.
Please see your Owner’s Manual for important safety information, syst\
em limitations, and additional operating and
feature information.
Windows
1
2
3
To slide the seat forward or backward, push the
switch 1 forward or backward.
To recline the seatback, push the switch
2 forward
or backward.
SEAT LIFTER
To adjust the angle of the front portion or height of the seat,
push the front or rear end of the
switch
1 up
or down.
LUMBAR SUPPORT
Push each side of the adjusting switch 3 to adjust the
seat lumbar area until the desired position is achieved.
SEAT/STEERING POSITIONING ON EXIT
The shift lever must be in P (PARK)
position with the ignition switch in
the OFF position.
The entry/exit function can be
activated or canceled by pushing
and holding the SET switch
4,
located on the driver’s side door, for more than 10 seconds.
Please see your Owner’s Manual for important safety information, syst\
em
limitations, and additional operating and feature information.
Seat Adjustments
23 1
4