coolant level INFINITI QX80 2020 Towing Guide

2020 INFINITI Towing Guide


20
6. If no leaks are apparent and all other components appear to be operating
properly with the engine cooled to its normal operating temperature ; check the
coolant level in the reservoir tank with the engine running. Add coolant to the
reservoir tank i f needed. At this point, if repairs are required, go to the nearest
INFINITI retailer . See the IN CASE OF EMERGENCY section of your vehicle owner’s
manual for additional information on overheating.

NOTE – All INFINITI vehicle s have an engine protection mo de which helps reduce the
chance of engine damage if the engine coolant reaches a specified temperature.

NOTES













Passenger Vehicles – INFINITI cautions that you do not tow a trailer with Q50, Q60, Q70 ,
vehicle s.

Cross- Over Vehic les – INFINITI cautions that you do not tow a trailer QX30, QX50, or the
QX70 2WD vehicles.

Other Recommendations and Information – Towing performance and speed are
affected by vehicle payload, tow weight, road grades, and weather conditions,
including h igh temperatures. See your vehicle owner’s manual for details.

TOWING GLOSSARY


BALL MOUNT A bar that holds the hitch ball and is inserted into the hitch receiver.
BRE AK AWAY SWI TCH A safety device using a trailer battery that automatically applies the trailer’s
brakes if it should accidentally become separated from the tow vehicle.
1. Maximum Trailer Weight values are calculated assuming a base
vehicle with driver and any options required, to achieve the
rating. Additional passengers, cargo and/or optional equipment
will add weight to the vehicle and reduce your vehicle’s
maximum towing capacity and trailer tongue load.

2. In general, a weight -distributing hitch system (Class IV) should be
used when towing over 5,000 lbs.
3. Most states require a separate braking system on trailers with a
loaded weight above a specific amount. Check local ordinances.
7- pin connector trailer wire harnesses are required for use with
trailer brakes (available separately).