JEEP CHEROKEE LATITUDE 2019 Owners Manual
Page 511 of 638
represent higher levels of performance on the laboratory
test wheel, than the minimum required by law.
Page 512 of 638
Page 513 of 638
Page 514 of 638
•If you carry special cargo such as chemicals, fertilizers,
de-icer salt, etc., be sure that such materials are well
packaged and sealed.
• If a lot of driving is done on gravel roads, consider mud
or stone shields behind each wheel.
• Use Mopar Touch Up Paint on scratches as soon as
possible. An authorized dealer has touch up paint to
match the color of your vehicle.
INTERIORS
Seats And Fabric Parts
Use Mopar Total Clean to clean fabric upholstery and
carpeting.
Page 515 of 638
Page 516 of 638
Page 517 of 638
Page 518 of 638
Page 519 of 638
Page 520 of 638
Inspect the wheel mounting surface prior to mounting the
tire and remove any corrosion or loose particles.
Tighten the lug nuts/bolts in a star pattern until each
nut/bolt has been tightened twice. Ensure that the socket is
fully engaged on the lug nut/bolt (do not insert it half-
way).After 25 miles (40 km), check the lug nut/bolt torque to be
sure that all the lug nuts/bolts are properly seated against
the wheel.
Wheel Mounting Surface
Torque Patterns
518 TECHNICAL SPECIFICATIONS