JEEP WRANGLER 1995 Owners Manual
Page 1851 of 2158
Fig. 1 Extension Housing Removal
Fig. 2 Rear Bearing Snap Ring Removal
Fig. 3 Rear Retainer Removal
Fig. 4 Loosening Rear Case
JNP231 TRANSFER CASE 21 - 289
Page 1852 of 2158
Fig. 6 Oil Pump And Pickup Tube Removal
Fig. 7 Removing Oil Screen And Pickup Tube
Fig. 8 Pickup Tube O-Ring Location
Fig. 9 Mode Spring Removal
21 - 290 NP231 TRANSFER CASEJ
Page 1853 of 2158
Fig. 11 Removing Mainshaft, Mode Fork And Shift
Rail
Fig. 12 Removing Mode Fork And Rail From Sleeve
Fig. 13 Hub Snap Ring And Spacer Removal
Fig. 14 Removing Sleeve From Hub
JNP231 TRANSFER CASE 21 - 291
Page 1854 of 2158
Fig. 16 Drive Sprocket Removal/Installation
Fig. 17 Disengaging Range Fork
Fig. 18 Range Fork And Hub Removal/Installation
Fig. 19 Shift Sector Removal/Installation
Fig. 20 Removing/Installing Sector Shaft Bushing
And O-Ring
21 - 292 NP231 TRANSFER CASEJ
Page 1855 of 2158
Fig. 22 Front Bearing Retainer Bolt Locations
Fig. 23 Removing Front Bearing Retainer
Fig. 24 Removing Input Gear Snap Ring
Fig. 25 Removing Input And Low Range Gear
Assembly
JNP231 TRANSFER CASE 21 - 293
Page 1856 of 2158
Fig. 26 Removing Low Range Gear Snap Ring
Fig. 27 Input And Low Range Gear Components
Fig. 28 Low Range Annulus Gear Location
21 - 294 NP231 TRANSFER CASEJ
Page 1857 of 2158
Fig. 30 Removing/Installing Front Output Shaft
Bearing Snap Ring
Fig. 31 Installing Front Output Shaft Front Bearing
In Case
Fig. 32 Front Output Shaft Rear Bearing Removal
Fig. 33 Front Output Shaft Rear Bearing Installation
JNP231 TRANSFER CASE 21 - 295
Page 1858 of 2158
Fig. 35 Input Gear Bearing Installation
Fig. 36 Puller Jaws In Retracted Position
Fig. 37 Puller Bolt And Jaws Seated Under Needle
Bearing
21 - 296 NP231 TRANSFER CASEJ
Page 1859 of 2158
Fig. 39 Removing Mainshaft Pilot Bearing From
Input Gear
Fig. 40 Installing Mainshaft Pilot Bearing In Input
Gear
Fig. 41 Input And Low Range Gear Components
Fig. 42 Installing Input Gear Snap Ring
JNP231 TRANSFER CASE 21 - 297
Page 1860 of 2158
Fig. 44 Applying Sealer Bead To Bearing Retainer
Fig. 45 Aligning Retainer Oil Channel With Feed
Hole In Case
Fig. 46 Bearing Retainer Installation
Fig. 47 Installing Sector O-Ring And Retainer
Bushing
21 - 298 NP231 TRANSFER CASEJ