display KIA CADENZA 2019 Navigation System Quick Reference Guide

32
UVO eServices Commands List
Co\b\bandOperation
052CRoadside AssistConnect with a Road\eside Assist agent.
052CVehicle
DiagnosticsInfor\bs you if diagnostic i\essues are found in your vehicle
052CMy POIsDisplays Points of Interest list which were downloaded
fro\b MyUVO.
052CeService Guide
Provides guidance on h\eow to use UVO eServices
Other Commands List
(Commands used in List/Help)
Co\b\band Operation
052CHelpMoves to the voice recognition hel\ep screen.
All available co\b\bands can then\e be identified and u\esed.
052ALine 1 to 4
(One to Four)When you cannot select a certain na\be, you can select it
using nu\bbers.
Si\bple nu\bbers can be recogn\eized, such as “One” or “\fwo”.
052AYes/No
When voice recognition is activated, this co\b\band is used
when an answer is requested for a confir\bation question.
052APrevious/Next When four or \bore searched ite\bs are listed, you can
\bove to the previous or next page using a voice co\b\band.
052AManual InputWhen Dial entry results are displayed, this co\b\band is
used to search \banually, rather than to search with a voice
co\b\band.
Voice recognition st\eops after this co\b\ba\end is used.
052AGo Back
Moves to the previous screen.
052CExit Ends the voice recognition.
V

35
About Making/Answering Phone Calls
Q How can I answer a call?
A When there is an inc\eo\bing call, a notif\eication pop-up wil\el beco\be displayed. \fo answer the inco\bing call, select the
button on the screen or the
key on the steering wheel control.
\fo reject the call, select the
button on the screen or press the
key on the steering wheel control.
Q What should I do if I a\b talking on the Handsfree but want to switch the call
to the \bobile phone?\e
A While on a call, press and hold (\bore than 0.8 seconds) the
key
on the steering
wheel control or select the button at the bot-
to\b of the Phone scr\eeen to switch the call to y\eour \bobile phone.
About Bluetooth® Wireless Technology/
Multimedia System Use \bnvironment
QWhat is the range of \by wireless connectio\en?
A\fhe wireless connecti\eon can be used with\ein 15 yards.
QHow \bany \bobile phones can \ebe paired?
AIt is possible to pair up to fi\eve \bobile phones.
QWhy is call quality \eso\beti\bes poor?
A Check the reception sensitivity of the \bobile phone when call quality
beco\bes worsened. \fhe call quality \bay deteriorate when the signal
strength is low. Call quality \bay also worsen if \betal objects, such as bev -
erage cans, are placed near the \bobile phone. Check to see if there are
\betal objects in the vicinity of the \bobile phone. \fhe call sound and quality
\bay differ depending on the \etype of \bobile phone\e.
Accept
Reject
Use Private

40
\bdit Route
Select the button to
change the route.
Refer to the Route > Editing Route
section in the \banual for \bore infor-
\bation(page 5-26).
Map Display
Displays the direction of\e the \bap.
Press
, or .
Na\beDescription
North
Up
(2D) Displays always
has north at the
top of screen.
Heading

Up (2D) Displays always
shows the vehi-
cle’s direction
as proceeding
towards the top of
the screen.
3DShows the \bap in

3 di\bentions.
3D BuildingsShows or hides
buildings on the
\bap.
Navigation
Edit Route

41
POI
Select the button on the bot-
to\b left of the screen 0521
Select the
button.
View \fearby POIs
Select check button to set
whether to show nearby POIs or not.
When categories are selected, they
will appear on the \bap. (ex. Gas
Stations) \fhe lists of nearby gas stations are
displayed.
\fhe list can be sorted to display in
order of distance o\er na\be.
Na\be
Description

Call to the selected\e location (Phone
needs to be
connected via
Bluetooth).
Start the preferred navigation route to
selected location.

Choose the pre-
ferred navigation
route to selected
location.
Set the location as a waypoint.
Save the location.
Search nearby POIs.
Menu
POI
Start
Guidance
Routes
Add
W
Save
POI

43
Once the destination has been iden-
tified either by POI na\be, address,
or coordinates, the \bap screen will
be displayed.
Fro\b this screen you can set the
destination or add a waypoint, or
add the displayed destination to your
address book.
Address
Set destination by address search.
Press the
N head unit key. 0521

Select the
tab. 0521 Select
the
icon.
How to Search Address
Search criteria can be entered
in any order. Exa\bple:
then then then
.
Na\be Description
Select state to sear\ech.

Select a city before
entering the street na\be.
Addresses are searched
only fro\b the select\eed city.
Enter house nu\bber. If you
don’t know the house nu\b -
ber, press
button.
Enter a street na\be. If
sa\be street na\bes exist in
other cities, the list of cities
will be displayed.
Destination
Addr
State
City
Str
House No.
Skip

45
POI Categories
Press the N head unit key. 0521

Select the
tab. 0521 Select
the
icon.
Select the desired it\ee\b.
Select the desired ite\b in the
sub-categories.
Arrange by all, latest destinations,
latest searched places and latest
departing places. Arrange in order of
date and ti\be.
Na\be Description

Display all desti-
nations, depart -
ing places, and
searched places.
Display previous destination places
for route guidance.
Display previous departing places
for route guidance.

Display previously searched places
for route guidance.
But, not dis-
played when
the searched
places are set
as destination.
Destination
POI Categories
All
Destinations
Start Points
Sear

49
Coordinates
Press the N head unit key. 0521

Select the
tab. 0521 Select the
to search by coordinates.
\fhere are two ways to search by
coordinates (D.M.S or Deci\bal
Degrees). After typing coordinates,
press the
button to search.
Press the button to start
guidance.
Favorite Places
Set the route using your favorite
places.
Press the
N head unit key. 0521

Select the
tab. 0521 Select
fro\b favorite places.
On the button where locations are
not registered, the icon is dis -
played. When a location is regis -
tered, the
button disappears and
the buttons 1 to 3 are displayed as
your favorite places.
Destination
Coor
OK
Start
Guidance
Destination

51
All Routes
\fhree routing options are displayed
based on real ti\be traffic infor\bation
and traffic pattern infor\bation and
shorter distance.
• Route 1: Select the best route
based on co\bbine real-ti\be traffic
infor\bation and traffic pattern data
on the \bap.
• Route 2: Select the best route
based on real-ti\be traffic infor\ba-
tion.
• Shorter Distance: Select short
distance, regardless of how fast or
slow progress will be calcul\eated.
Na\beDescription

Display total distance, travel
ti\be. Select the
desired route.
Start the guid-
ance with the
route.
Change the route option.
You can check route infor\ba -
tion.
Edit the route.
\fotalDisplay total
distance of the
route.
Freeway Display length of
freeway on the
route.
\foll RoadsDisplay length of
toll road on the
route.
FerryDisplay length of
Ferry route on
the route.
Start Guidance
Route Options
Route Info.
Edit Route

52
Route Guidance
Show route guidance detailed infor-
\bation.
Route Guidance Screen\c
Na\be Description
Displays the distance and\e direction to the fi\erst turn
point.
Displays the distance and\e direction to the sec\eond
turn point.
Displays the lane infor\ba-
tion at the current\e location.
Display the reco\b\bended
direction in white, travel-
able direction in whi\ete, and
the non-travelable direction
in grey.
Displays the distance to \e
the destination and\e the
esti\bated ti\be of arr\eival.
Press the button to check
the detailed infor\bation. If
no waypoint is set, you will
see the re\baining dis\etance
or esti\bated ti\be of \earrival
in turn each ti\be you click
the button.
Cancel the route.
Displays the \furn List. Closes the \furn List.
Navigation

54
\bditing Route
Edit the current ro\eute.
Press the
N head unit key. 0521

Select the
tab. 0521
Select
.
Press the icon.
Na\be Description
Display the selected point on
the \bap screen.
Move the selected ite\b up.
Move the selected ite\b
down.
Delete the selected ite\b.
Press the button to finish editing.
Press the button to add waypoint.
Add the waypoint through various
searching \bethods.
Navigation
Route
Edit Route
Edit Route
Done
Add W