navigation system KIA CADENZA 2020 Navigation System Quick Reference Guide

9-18
Import Address Book from USB Device
You can import the location data on a USB device to the system.
 A
The previous location data on the system is to be deleted.
 A
While importing from a navigation system that uses a
diff erent coordinate system, the locations may appear
diff erently.
Export Address Book to USB Device
You can export the location data on the system to a USB device.
 A
The location data on the USB device is deleted.
Extend Rear Camera Use (if equipped)
You can set to display the rear camera display even when you
change the shift position other than “R” (Reverse) after reversing.
 A
When you shift to "P" (Park) or drive at a predetermined
speed or faster, the rear view display disappears to display the
previous screen.
Confi guring the sound settings
You can change the sound settings such as speaker volume and
sound eff ects.
 A
Available settings may diff er depending on the vehicle model
and specifi cations.
 A
Some functions may not be available depending on the
infotainment system and amplifi er specifi cations on the
vehicle.
1 On the All Menus screen, touch Setup >
Sound.
The sound settings screen appears.
2 Confi gure the settings required:
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00120019>


ß
1



ß
1


9-21
Tone
You can adjust the sound by adjusting the strengths (output
levels) for each audio band: Bass, Midrange, and Treble. You can
also initialize the output levels for all audio bands.
 A
To initialize the output levels for all audio bands, touch
Center.
Priority
You can confi gure the settings so that a specifi c sound is more
audible over other sounds.
Navigation Guidance
You can set to enable the navigation sound to be heard fi rst when
using both the navigation system and Radio/Media system.
Proximity Warning
Lowers all other audio volumes when the camera view is active.
Navigation Guidance During Calls
Even during a call, the navigation sound is heard.

Start-up Volume Limit
You can set to automatically decrease the audio volume to an
adequate level when turning on the vehicle.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130012>


ß
1



ß
1


9-26
Guidance
You can confi gure the navigation guidance settings.
 A
The screen may diff er depending on the vehicle model and
specifi cations.
Show Guidance Distance
You can confi gure settings for displaying the distance to the
destination during guidance.
000eInterval Distance: Displays the distance as the one between
diff erent zones.
000eCumulative Distance: Displays the distance as the one
between the current position and target position.
Border Crossing Info.
You can set whether or not to display the border crossing
information on the screen. 000eDetailed Guidance View: You can set to display detailed
information on the Map screen, such as moving directions
and lane change.
000eSpeed Limits: Sets whether or not to display the speed limits
on the screen.
Map Auto-scale Settings
You can set the scales for each vehicle speed zone.
 A
For example, when you select “100 m” for the “21–50 km/h”
zone and “200 m” for the “51–80 km/h” zone, the unit interval
for the map scale on the navigation screen becomes 100
m when the vehicle speed is 50 km/h and 200 m when the
vehicle speed is 51 km/h.
Return to Map: Set Time
You can set the system to automatically display the map screen
after a specifi ed period of time when switched to the Radio/Media
mode screen while using the navigation.
> See “Return to Map: Set
Time.”
 A
This function works while driving once a destination has been
set.
 A
This feature is not available on the phone projection screen.
Auto Re-center Map
You can set the system to automatically display the current
position when the specifi ed period of time elapses after changing
to another position on the map.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130017>


ß
1



ß
1


9-27
Fuel Price Information (if equipped)
When displaying gas stations or LPG charging stations on the
map, the fuel prices below a specifi c range can be displayed.
 A
Select Display Fuel Price Info on Map to view recommended
fuel prices based on the prices off ered in the area.
 A
Fuel prices on the map may diff er from actual ones.
User Data
You can import location data from a USB device to the system, or
export the data on the system to a USB device.
 A
When importing or exporting the location data, you can uses
only the USB device formatted in exFAT, FAT16/32, or NTFS.
000eImport Address Book from USB Device: You can import the
location data on a USB device to the system.
 A
The previous location data on the system is to be deleted.
 A
While importing from a navigation system that uses a
diff erent coordinate system, the locations may appear
diff erently.
000eExport Address Book to USB Device: You can export the
location data on the system to a USB device.
 A
The location data on the USB device is deleted.
Show Route Overview While Stopped.
You can set to display the route overview from the start point to
the destination when the vehicle is stationary.
Others
You can confi gure navigation options, e.g., turning on or off fuel
prices, exporting or importing places from and to Address Book.
 A
The screen may diff er depending on the vehicle model and
specifi cations.
Previous Destinations Settings
You can set to automatically save the previous destination and
display the previous destinations when the navigation system
starts.
000eSave Previous Destinations: The previous destination is
automatically saved.
000eShow Previous Destinations after Navigation Start-
up: When the navigation system starts, the list of recent
destinations appear on a pop-up window.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130018>


ß
1



ß
1


9-28
Confi guring the UVO settings
You can subscribe to the UVO service or see the modem
information.
1 On the All Menus screen, touch Setup >
UVO.
The UVO settings screen appears.
2 Confi gure the settings required:
Activate UVO
You can subscribe to the UVO service by using the UVO settings
menu.
 A
For more information: > see “Subscribing to the service.”
GPS Information
You can see the GPS satellite status and coordinates of the
current position.
a
b
The following information appears:
a a Can see the reception status of the satellite signals.
000eReceiving: Satellite signals are being received and the
current position is recognized.
000eSearching: The system is scanning the satellite signals.
b b Can see the current location.
Reset
You can initialize all the settings of the navigation system.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130019>


ß
1



ß
1


9-36
Storage
You can check the storage space of the system memory where
voice memos can be saved.
User's Manual on Web (QR Code)
You can access the online user’s manual of the system by
scanning the QR code with your smartphone.
Reset
You can initialize all system settings including general settings
and navigation settings.
ÜÜCaution
000eWhen initialization is performed, all user data in the system
including the location data is deleted.
000eWhen phone projection is active, you cannot reset the system
settings. To reset the settings, remove the USB cable from
your system.
Confi guring the display
settings
You can change the system display settings such as display
brightness.
1 On the All Menus screen, touch Setup >
Display.
The display settings screen appears.
2 Confi gure the settings required:
Mode
You can set the system to automatically adjust the display
brightness depending on the ambient light intensity. You can also
set the system to keep the display bright or dark all the time.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140017>


ß
1



ß
1


9-39
Updating the system software
and map
You can update the navigation map and infotainment system.
Please visit your local dealership to update your system.
 A
Any changes made after the update fi le is created are not
refl ected in the map. As a result, certain roads, buildings, and
speed limits on the map may not be up to date.
 A
Depending on the total data amount, an update may take
several minutes.
 A
Do not turn off the system or remove the storage device while
the update is in progress. When power supply is cut off or the
storage device is removed from the system, it may damage
the data or cause a system malfunction.
Repeat Folder
Set to include sub-folders when playing a folder on repeat.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e0014001a>


ß
1



ß
1


10-8
Navigation system operation
Symptom Possible cause Solution
The destination is not searched. Outdated map data To update your system, visit your local dealership.
Route guidance of the navigation
system does not match the
actual road conditions.Outdated map data To update your system, visit your local dealership.
There have been changes in the
road after a map update.Route guidance of the navigation system may not match the actual
road conditions even after the map is updated to the latest version
because the update depends on the creation date. Be sure to drive
according to actual road conditions and regulations.
Guidance is made by bypassing
the route or the speed camera
alerts are not followed.The update for the system and
map data is required.To update your system, visit your local dealership.
The real-time traffi c information
is not received.Poor signal reception
000eReception of traffi c information may not be made smoothly in
mountain and island areas. Check the reception status again in
a region with strong signals.
000eIf the problem persists, contact your place of purchase or dealer.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e0019>


ß
1



ß
1


10-9
System status indicator icons
You can see the system status by checking the status indicator
icons at the top right of the system screen.
Diff erent status indicator icons appear when each function is
performed. The meanings of the icons are as follows:
Mute/memo recording
Navigation sound muted
Radio/Media sound muted
All sound outputs muted
Recording a voice memo
Bluetooth/call
Connecting a phone via Bluetooth
Connecting an audio device via Bluetooth
Connecting a phone and an audio device via Bluetooth
Making a call via a Bluetooth phone
Bluetooth phone’s microphone off
Downloading the contact and list of recent calls from
the connected Bluetooth phone
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e001a>


ß
1



ß
1


10-11
Bluetooth
QWhich functions can I use via Bluetooth?
AYou can use the hands-free call function with a mobile
phone connected. You can also play music after
connecting an audio device such as MP3 player or mobile
phone.
> See “Making a call via Bluetooth.“, “Listening to music
via Bluetooth.”
QHow can I register a Bluetooth device?
AOn the All Menus screen, touch Setup >
Device
Connections >
Bluetooth >
Bluetooth Connections >

Add New. From the Bluetooth device to be connected,
search for the vehicle system and register it. Use the
Bluetooth device to enter or approve the authentication
number displayed on the system. Then the device is
added to the list of Bluetooth devices in the system and
automatically connected to the system.
> See “Connecting
a Bluetooth device.”
FAQ
Navigation
QHow can I update the map?
AYou can download the latest map data to a USB device
and use the device to update the map.
> See “Updating the
system software and map.”
QGuidance is made by bypassing the route or the speed
camera alerts are late.
ASelect another route after setting the route options.
On the map screen, touch Menu >
Route >
Route
Options to change the settings and resume navigation.
> See “Changing the route search criteria.”
When the system is not updated, update the software
and map and then perform search again.
> See “Updating
the system software and map.”
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e00120012>


ß
1



ß
1