navigation KIA CADENZA 2020 Navigation System Quick Reference Guide

9-22
Reset
You can initialize all the sound settings.
Turning on/off the screen touch sound
To turn on or off the touch sound on the screen,
touch Beep at the top of the screen.
Navigation Volume
You can select a method to adjust the navigation volume.
Mute Navigation Guidance (if equipped)
Press the Mute button on the steering wheel when the navigation
guidance is being output to set to mute the guidance volume for
10 seconds.
Use Map Screen Volume Buttons
You can adjust the navigation volume by using the volume control
button on the map screen.
Use Map Screen Volume Buttons or Volume
Knob
By using the volume control button on the map screen or
using the Volume knob on the control panel, you can adjust the
navigation volume.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130013>


ß
1



ß
1


9-23
Use Network (if equipped)
When UVO is activated, press the button in the vehicle to initiate
network Navigation searches. Network searches can provide a
greater variety of results, but rely on network signal strength.
Audio samples are collected and stored anonymously for further
quality improvements.
Confi guring the voice
recognition settings
You can change the settings for voice recognition.
1 On the All Menus screen, touch Setup >
Voice
Recognition.
The voice recognition settings screen appears.
2 Confi gure the settings required:
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130014>


ß
1



ß
1


9-24
Confi guring the navigation
settings
You can confi gure the navigation settings for navigation
operations, screen display, voice guidance, etc. You can also
export or import the location data.
 A
For details on how to use navigation functions, see the
“Navigation” chapter.
> See “Navigation.”
1 On the All Menus screen, touch Setup >

Navigation.
The navigation settings screen appears.
2 Confi gure the settings required:
Guidance
You can set whether to hear the voice recognition guidance
briefl y or in detail. You can also turn off the voice guidance.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130015>


ß
1



ß
1


9-25
000dDisplay Traffi c: Displays nearby traffi c information on the
map.
000d3D Buildings: Displays major buildings on the map in
three dimensions.
000dAuto-scale: Automatically changes the scale of the map.
000ePOI Display: You can specify the icon type to display nearby
places on the map.
 A
Touch on the right side of Gas/LPG Station to select display
options for fuel prices.
000dGas and LPG stations on the Map screen will also show their
fuel prices if they are lower than the set price.
000dSelect Display Fuel Price Info on Map to view
recommended fuel prices based on the prices off ered in
the area.
000dFuel prices on the map may diff er from actual ones.
Information
You can specify the information to display on the navigation map
screen while driving.
000eRoute Guide Line: Used to display the route guide line in
diff erent colors depending on the traffi c conditions. To display
the route color with a fi xed one, uncheck Show Traffi c Colors
on Route and select a color.
000eVehicle Symbol: You can specify the icon type to display your
current location on the map.
000eUnit: You can set the distance unit of the navigation map to
Kilometers (km) or Miles (mi) (if equipped).
000eShow Vehicle Speed: Displays the vehicle speed on the map.
Display
You can specify the information to display on the navigation map
screen.
 A
The screen may diff er depending on the vehicle model and
specifi cations.
Map
You can specify the items to display on the map.
000eMap Font Size: You can set the size of the screen font on the
navigation map.
000eMap Color: You can set the navigation map background color.
000eMap Display: You can specify the items to display on the map.
000dMap View: Set the navigation map display mode. To
automatically rotate the map screen based on the driving
direction, select 2D Heading Up. To fi x the top of the map
screen to north, select 2D North Up. If you select 3D Map,
the map screen is displayed in 3D mode and automatically
rotates based on the driving direction.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130016>


ß
1



ß
1


9-26
Guidance
You can confi gure the navigation guidance settings.
 A
The screen may diff er depending on the vehicle model and
specifi cations.
Show Guidance Distance
You can confi gure settings for displaying the distance to the
destination during guidance.
000eInterval Distance: Displays the distance as the one between
diff erent zones.
000eCumulative Distance: Displays the distance as the one
between the current position and target position.
Border Crossing Info.
You can set whether or not to display the border crossing
information on the screen. 000eDetailed Guidance View: You can set to display detailed
information on the Map screen, such as moving directions
and lane change.
000eSpeed Limits: Sets whether or not to display the speed limits
on the screen.
Map Auto-scale Settings
You can set the scales for each vehicle speed zone.
 A
For example, when you select “100 m” for the “21–50 km/h”
zone and “200 m” for the “51–80 km/h” zone, the unit interval
for the map scale on the navigation screen becomes 100
m when the vehicle speed is 50 km/h and 200 m when the
vehicle speed is 51 km/h.
Return to Map: Set Time
You can set the system to automatically display the map screen
after a specifi ed period of time when switched to the Radio/Media
mode screen while using the navigation.
> See “Return to Map: Set
Time.”
 A
This function works while driving once a destination has been
set.
 A
This feature is not available on the phone projection screen.
Auto Re-center Map
You can set the system to automatically display the current
position when the specifi ed period of time elapses after changing
to another position on the map.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130017>


ß
1



ß
1


9-27
Fuel Price Information (if equipped)
When displaying gas stations or LPG charging stations on the
map, the fuel prices below a specifi c range can be displayed.
 A
Select Display Fuel Price Info on Map to view recommended
fuel prices based on the prices off ered in the area.
 A
Fuel prices on the map may diff er from actual ones.
User Data
You can import location data from a USB device to the system, or
export the data on the system to a USB device.
 A
When importing or exporting the location data, you can uses
only the USB device formatted in exFAT, FAT16/32, or NTFS.
000eImport Address Book from USB Device: You can import the
location data on a USB device to the system.
 A
The previous location data on the system is to be deleted.
 A
While importing from a navigation system that uses a
diff erent coordinate system, the locations may appear
diff erently.
000eExport Address Book to USB Device: You can export the
location data on the system to a USB device.
 A
The location data on the USB device is deleted.
Show Route Overview While Stopped.
You can set to display the route overview from the start point to
the destination when the vehicle is stationary.
Others
You can confi gure navigation options, e.g., turning on or off fuel
prices, exporting or importing places from and to Address Book.
 A
The screen may diff er depending on the vehicle model and
specifi cations.
Previous Destinations Settings
You can set to automatically save the previous destination and
display the previous destinations when the navigation system
starts.
000eSave Previous Destinations: The previous destination is
automatically saved.
000eShow Previous Destinations after Navigation Start-
up: When the navigation system starts, the list of recent
destinations appear on a pop-up window.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130018>


ß
1



ß
1


9-28
Confi guring the UVO settings
You can subscribe to the UVO service or see the modem
information.
1 On the All Menus screen, touch Setup >
UVO.
The UVO settings screen appears.
2 Confi gure the settings required:
Activate UVO
You can subscribe to the UVO service by using the UVO settings
menu.
 A
For more information: > see “Subscribing to the service.”
GPS Information
You can see the GPS satellite status and coordinates of the
current position.
a
b
The following information appears:
a a Can see the reception status of the satellite signals.
000eReceiving: Satellite signals are being received and the
current position is recognized.
000eSearching: The system is scanning the satellite signals.
b b Can see the current location.
Reset
You can initialize all the settings of the navigation system.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00130019>


ß
1



ß
1


9-36
Storage
You can check the storage space of the system memory where
voice memos can be saved.
User's Manual on Web (QR Code)
You can access the online user’s manual of the system by
scanning the QR code with your smartphone.
Reset
You can initialize all system settings including general settings
and navigation settings.
ÜÜCaution
000eWhen initialization is performed, all user data in the system
including the location data is deleted.
000eWhen phone projection is active, you cannot reset the system
settings. To reset the settings, remove the USB cable from
your system.
Confi guring the display
settings
You can change the system display settings such as display
brightness.
1 On the All Menus screen, touch Setup >
Display.
The display settings screen appears.
2 Confi gure the settings required:
Mode
You can set the system to automatically adjust the display
brightness depending on the ambient light intensity. You can also
set the system to keep the display bright or dark all the time.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e00140017>


ß
1



ß
1


9-39
Updating the system software
and map
You can update the navigation map and infotainment system.
Please visit your local dealership to update your system.
 A
Any changes made after the update fi le is created are not
refl ected in the map. As a result, certain roads, buildings, and
speed limits on the map may not be up to date.
 A
Depending on the total data amount, an update may take
several minutes.
 A
Do not turn off the system or remove the storage device while
the update is in progress. When power supply is cut off or the
storage device is removed from the system, it may damage
the data or cause a system malfunction.
Repeat Folder
Set to include sub-folders when playing a folder on repeat.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f00450043000100010001001a000e0014001a>


ß
1



ß
1


10-8
Navigation system operation
Symptom Possible cause Solution
The destination is not searched. Outdated map data To update your system, visit your local dealership.
Route guidance of the navigation
system does not match the
actual road conditions.Outdated map data To update your system, visit your local dealership.
There have been changes in the
road after a map update.Route guidance of the navigation system may not match the actual
road conditions even after the map is updated to the latest version
because the update depends on the creation date. Be sure to drive
according to actual road conditions and regulations.
Guidance is made by bypassing
the route or the speed camera
alerts are not followed.The update for the system and
map data is required.To update your system, visit your local dealership.
The real-time traffi c information
is not received.Poor signal reception
000eReception of traffi c information may not be made smoothly in
mountain and island areas. Check the reception status again in
a region with strong signals.
000eIf the problem persists, contact your place of purchase or dealer.
,@/"',@:(
1&@(8*%&<64"@&6>"7/5@'.4$#@JOEC


<002c0040002f00220027002c0011001100140040003a002800010012001a003100260040002800160038002a00250026003c003600340022004000260036003e00220037002f0035004000270017002e00340018002400230011001100110040000f004a00
4f0045004300010001000100120011000e0019>


ß
1



ß
1