odometer KIA EV6 2022 Features and Functions Guide

Refer to the inside front cover for more information on QR codes.www.youtube.com/KiaFeatureVideos
EV Instrument Cluster Overview Video
EV Distance to Empty (DTE) Video
QR CODES
A POWER (PWR) - Energy consumption rate
B CHARGE (CHG) - Charge status of the regenerative brakes
C Battery State of Charge (SOC) gauge
D Speedometer
E Distance to Empty / Range
F Reduction gear shift indicator
G Odometer
H Regenerative braking level indicator
I EV energy economy
Distance to Empty (DTE) or Range E is the estimated distance an EV can be driven with the remaining electric energy until the battery reaches zero. DTE can vary depending on the selected drive mode, current driving conditions, traffic, driving patterns, air conditioner or heater use, and how much cargo you are carrying.
EV Instrument Cluster Overview
Distance to Empty (DTE) / Range
Your vehicle’s instrument cluster & indicator light locations may differ from those in the illustrations. For more information on the instrument cluster, the LCD Warning Messages and the function of all indicator and warning lights, please refer to section 5 of the Owner ’s Manual.
Illustrations are for demonstration purposes only. Some indicators and warning lights may not appear in illustrations. On the vehicle, they may appear in the LCD.
3*IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS.
REMINDERS:
•
If DTE displays “Zero Miles,” you need to charge the vehicle immediately
•
Most electric vehicles can drive an additional t wo to five miles depending on driving conditions
•
Distance to empt y may depend on many factors such as the charge amount of the high voltage bat ter y, weather, temperature, durabilit y of the bat ter y, geographical features, and driving st yle
•Operating the climate control system may reduce the Distance to Empt y
•When decelerating or driving downhill, regenerative braking charges the high voltage bat ter y which minimizes energy loss and increases the Distance to Empt y or Range
•When you set a destination via the on-board navigation system, DTE is calculated based on the route selected. By set ting a final destination, DTE accuracy improves. By knowing the final location, the vehicle can bet ter predict the amount of bat ter y energy it will need to reach that destination
•When operating the climate control, use the DRIVER ONLY function to conser ve energy
•In cold weather, use scheduled heating to reduce the amount of energy consumption
•In the EV Set tings, select WINTER MODE to increase the bat ter y temperature in cold weather
QUICK TIPS
CHG
PWR
EPB
１
00 kWh/ １00m6202 mABS0 20 4060
0mph
0 KMH
268m
268m
96%Lv １READY
P
INSTRUMENT CLUSTERINSTRUMENTCLUSTER
F
HC
D
EAG
B
I

6*IF EQUIPPEDEV6 FEATURES & FUNCTIONS GUIDE
Low Battery Warning – When the high-voltage battery level reaches 8% or less, this warning message appears on the LCD and the warning indicator light on the instrument cluster illuminates. Charge the high-voltage battery immediately.
Power limited due to low EV battery temperature. Charge battery – When the outside temperature is low and you turn the vehicle on or off, this warning message may appear on the LCD. If the battery level is low and the vehicle is parked outside for a long time, vehicle power may be limited. Charging battery before driving helps increase power.
Stop vehicle and check power supply – When there is a failure in the power supply system, this warning message appears on the LCD. Park the vehicle in a safe location and have it towed to the nearest Kia dealer for inspection.
EV Battery Overheated! Stop Vehicle – When the high-voltage battery temperature is too high, this warning message will appear on the LCD. Stop the vehicle and turn off the Power button so that the battery temperature decreases.
Charge immediately. Power limited – When the high-voltage battery level reaches 3% or less, this warning message appears on the LCD,
the warning indicator light on the instrument cluster illuminates and the power down warning light turns ON simultaneously.
The vehicle’s power will be reduced to minimize the energy consumption of the high-voltage battery. Charge the high-voltage battery immediately.
Power limited – This warning message appears when the vehicle’s power is limited for the following reasons:
1. When the high-voltage battery is below a
certain level, or voltage is decreasing
2. When the temperature of the motor or high-voltage battery is too high or too low
3. When there is a problem with the cooling system or a failure that may interrupt normal driving
Charge Warning Messages on Instrument Panel LCD
REMINDERS:
•
When these warning messages are displayed, do not accelerate or star t the vehicle suddenly
•
All stored driving information (except Odometer and Range) is reset if the bat ter y is disconnected
Low EV BatteryEV Battery Overheated!Stop Vehicle
Power limiteddue to low EV batterytemperature.Charge battery
Stop vehicle andcheck power supplyCharge immediately.Power limited
Power limited
Not all warnings and messages are displayed. These illustrations are for demonstration purposes only. Some messages may appear differently. See section 1 in the Owner ’s Manual for more information.
INSTRUMENT CLUSTER
INSTRUMENTCLUSTER

7*IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS.
Unplug vehicle to start – When starting the vehicle while the charging connector is still connected, this warning message will appear. Remove the charging connector and then start the vehicle.
Charge Warning Messages on Instrument Panel LCD (Continued)
Unplug vehicle to startCharging Stopped.Check the AC charger
Remaining Time
10 h 18m (90%)
Checkregenerative brakes
Charging Stopped.Check the DC charger
Charging Stopped. Check the AC/DC charger – When there is a problem with the external AC or DC charger, when the AC charger stops charging or when the charging cable is damaged, this message will appear. Check whether there is a problem with the charger or cable. If no problem is found, see an authorized Kia dealer for further assistance.
Remaining Time – Displays the remaining
time to charge the battery to the selected target battery charge level, current SOC and the charge voltage level.
Check Regenerative Brakes – Displays when the
regenerative brake system does not work properly. In this case, have your vehicle inspected by an authorized Kia dealer.
Charging Stopped. Check the cable connector – When the charging connector is not correctly connected to the charging inlet or the charging connector lock release button is pressed, this message will appear. If this occurs, separate the charging connector and re-connect it. Check whether there is any problem (external damage, foreign substances, etc.) with the charging connector and charging inlet. If the problem continues, see an authorized Kia dealer for assistance.
Illustrations are for demonstration purposes only. Some messages may appear differently. See section 1 in the Owner ’s Manual for more information.
REMINDERS:
•
When these warning messages are displayed, do not accelerate or star t the vehicle suddenly
•
All stored driving information (except Odometer and Range) is reset if the bat ter y is disconnected
Charging Stopped.Check the cable connector
Charging Door Open
OPEN
Charging Door Open – When starting the vehicle while the
charging door is still open, this warning message will appear. Close the charging door after charging is complete and then start the vehicle.
30%
INSTRUMENT CLUSTERINSTRUMENTCLUSTER

10*IF EQUIPPEDEV6 FEATURES & FUNCTIONS GUIDE
Refer to the inside front cover for more information on QR codes.www.youtube.com/KiaFeatureVideos
Steering Wheel Controls Video
EV Instrument Cluster Overview Video
QR CODETrip Modes / Trip Computer
The Trip Computer is a driver information system that displays information related to driving, such as average and instant accumulated info, drive info, driving style and energy flow. It appears on the display when the Power button is in the ON position.
To cycle through the instrument cluster modes B, press the Mode button A on the left side of the Steering Wheel.
When in the Trip Computer mode , press the OK button C up/down to cycle through the screens. When displaying information screens, press and hold the OK button C to reset to zero.
LCD Instrument Cluster Modes
Press the Mode button A on the left side of the Steering Wheel to scroll through different LCD Instrument Cluster Modes.
Driving Assist: Displays information for Smart Cruise Control, Driving Convenience, Speed Limit, Warning Timing, Warning Volume, Driver Attention Warning, Forward Safety, Lane Safety, Blind-Spot Safety, Parking Safety
Trip Computer Mode: Displays drive info, after recharging info and accumulated info for trip distance, average energy consumption, total driving time as well as energy flow info
Turn-by-Turn Mode*: Displays the route guidance,
destination info
Information Mode: Displays the tire pressure information
Master Warning Mode: Displays warning messages related to the vehicle when a function is not operating normally
Your vehicle’s steering wheel but tons may differ from those in the illustrations. For more information, refer to section 5 in the Owner ’s Manual.
Driving while distracted is dangerous and should be avoided. Drivers should remain at tentive to driving and always exercise caution when using the steering-wheel-mounted controls while driving.
For more information, refer to section 5 in the Owner ’s Manual.
REMINDERS:
•
Appearance of Trip Computer display may differ as equipped
•
All stored driving information (except Odometer and Range) is reset if the bat ter y is disconnected
%3*7&
*/'0·
5SJQNFUFS·
"WFSBHF
&OFSHZ
$POTVNQUJPO·
5JNFS
"'5&3
3&$)"3(*/(
*/'0·
5SJQNFUFS·
"WFSBHF
&OFSHZ
$POTVNQUJPO·
5JNFS
"$$6.6-"5&%
*/'0·
5SJQNFUFS·
"WFSBHF
&OFSHZ
$POTVNQUJPO·
5JNFS
&/&3(:
'-08
Accumulated InfoT rip
Average
Ti mer 247.5
15.7
17:42mi
MPG
h
(But tons located on left side of Steering Wheel)
OKOKOK
OK
MODEMODEMODE
OKOK
MODEMODEMODE
OKOKOK
MODEMODEMODE
OKOKOK
MODEMODEMODE
B
A
C
VEHICLE SETTINGS
VEHICLESETTINGS