battery KIA NIRO 2023 Features and Functions Guide

3 *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
A Tachometer/Power gauge
B Speedometer
C Hybrid battery SOC gauge
D Odometer
E Distance to empty
F Transmission shift indicator
G Outside temperature gauge
H Warning and indicator lights
I Plug-in hybrid mode indicator
J Fuel gauge
Arrow direction indicates the side of the vehicle the fuel door is located
Instrument Cluster Overview
Your vehicle’s instrument cluster & indicator light locations may differ from those in the illustrations For more information on the instrument cluster, the LCD Warning Messages and the function of all indicator and warning lights, please refer to section 5 of the Owner ’s Manual
This illustration is for demonstration purposes only Some indicators and warning lights may not appear in illustration On the vehicle, they may appear in the LCD Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Plug-In Hybrid Instrument Cluster Overview Video
QR CODE
(Type A)
INSTRUMENT CLUSTERINSTRUMENTCLUSTER
E
F
LH
324 miD
2
4 00mi x
１ 000 rp m75°F
60 3.0EPB
MPH
E
I
A
C
HH
J
D
B
G
F

6*IF EQUIPPEDNIRO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
Hybrid / Plug-In Hybrid Indicators at Startup
A
Hybrid System Gauge – Indicates how economically the vehicle is being driven
•CHARGE (Blue zone): High-efficiency range
•ECO (Green zone): Normal-efficiency range
•POWER (Grey zone): Low-efficiency range
B EV/HEV Mode – Displays the EV/HEV/AUTO/EV+* mode
C
Ready – Illuminates when the hybrid system is operational Even if the engine is off, the vehicle can be driven
D State of Charge (SOC) – Displays the hybrid battery charge status
To change the Plug-In Hybrid Mode, press the EV button E; switch between Automatic (AUTO), Electric (EV) mode and Hybrid (HEV) mode each time the button is pressed The indicator will display on the Instrument Cluster LCD F
•Automatic Mode - AUTO will be displayed on the instrument cluster and the vehicle will operate in Hybrid or Electric vehicle mode as needed
•Electric Mode - EV will display on the instrument cluster and the vehicle operates on the EV battery until the power is low, then it switches to HYBRID mode
•EV+ Mode - Press and hold the EV button to change to EV+ mode, where the vehicle runs on the EV battery except when the accelerator pedal is pressed all the way down Then the gasoline engine turns on to provide extra power
•Hybrid Mode - HEV will display on the instrument cluster and the high-voltage hybrid battery and the gasoline engine are both used to drive the vehicle
REMINDER: Avoid star ting or driving the vehicle when the fuel tank is empt y As the engine will be incapable of charging the high-voltage hybrid bat ter y, the bat ter y will lose its charge and may be damaged
(Center console next to shift dial)
For more information on the Hybrid system over view, please refer to section 1 of the Owner ’s Manual
For more information on Plug-in Hybrid modes, please refer to section 1 of the Owner ’s Manual
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Plug-In Hybrid Instrument Cluster Overview Video
Plug-In Hybrid Modes - Automatic, EV and HEV Video
EV Button / Plug-In Hybrid Modes (Plug-In Hybrid only)
INSTRUMENT CLUSTER
INSTRUMENTCLUSTERQR CODES
E F
75°F
１ 2 .１0 １0 20 30
324mi2400mi
AUTO
HOLD
MPH
EPB
HEV
READY
ABS EPB
CHARGEPOWER
L
H
ECO
E F
75°F
１ 2 .１0 １0 20 30
324mi2400mi
AUTO
HOLD
MPH
EPB
HEV
READY
ABS EPB
CHARGEPOWER
L
H
ECO
B
A
CD
ENGINESTARTSTOP
AUTO
HOLD
EV
R N
P
D
E
F
75°F
１ 2 .１0 １0 20 30
324mi2400mi
AUTO
HOLD
MPH
EPB
HEV
READY
ABS EPB
CHARGEPOWER
L
H
ECO
E
F

14*IF EQUIPPEDNIRO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
Plug-In Hybrid displays shown The images shown are for illustration purposes only Not all available displays are shown Screens may var y
For more information about energy flow, refer to sections 1 and 5 of the Owner ’s Manual
The instrument cluster LCD screen displays plug-in hybrid system modes to inform the driver of its status To change modes, go to User Settings in the Instrument Cluster LCD menu
EV Propulsion - The electric motor is moving the vehicle Engine-Only Propulsion - The engine is moving your vehicle
Power Assist - Both the electric motor AND the engine are moving the vehicle Engine Generation - While the vehicle is stopped, the engine is charging the hybrid battery
Instrument Cluster - Energy Flow
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Plug-In Hybrid Instrument Cluster Overview Video
QR CODE
HYBRID / PLUG-IN HYBRID SYSTEM
HYBRID/PLUG-IN

HYBRID
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Electric Mod
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Hyb
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Hyb
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Electric Mod
0
7
8
6
06F4
60
20
06F440
40
06F420
60
06F400
80Eng
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Electric Mod
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Hyb
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Hyb
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Electric Mod
0
7
8
6
06F4
60
20
06F440
40
06F420
60
06F400
80Cha
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Electric Mod
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Hyb
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Hyb
0

7
8
6
06F4
60
2006F440
4006F420
6006F40080Electric Mod

15*IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
Before Jump-Starting:
1
If the vehicle appears to have a dead battery, first press the 12V Battery Reset button A Then immediately start the vehicle by pressing the brake and turning the ignition on or pressing the Engine Start/Stop button
2
If the vehicle does not start after completing the above steps, then jump-start the vehicle (as described below)
REMINDERS:
•After star ting, idle or drive the vehicle for more than 30 minutes to help charge the 12V bat ter y
•
If the vehicle does not star t immediately after pressing the 12V Bat ter y Reset but ton A, then the power of the 12V bat ter y is automatically disconnected to save any additional discharge
•
Repeated use of the 12V Bat ter y Reset but ton may cause over discharge which will prevent the vehicle from star ting
Jump-Starting:
1 Remove the fusebox cover B under the front hood
2 The {+} jump start terminal C is located in the fuse box; the suitable ground point D is located
in the engine compartment (See Owner ’s Manual for detailed description)
3
Connect cables coming from the battery booster source in the following order and disconnect in reverse order
•Connect the {+} clamp of your jumper cable to the {+} jump start terminal C
•Connect the {-} clamp of your jumper cable to the suitable ground point D
4
Press the 12V Battery Reset button A then immediately start the vehicle by pressing the brake and turning the ignition on or pressing the Engine Start/Stop button
REMINDER: Jump-star ting your vehicle can be dangerous if done incorrectly Follow the above jump-star ting procedures to avoid harm to yourself or damage to your vehicle and any of its components You should also consult your Owner's Manual for fur ther detailed instructions for jump-star ting your vehicle If in doubt, we strongly recommend that you have a competent technician or towing ser vice jump-star t your vehicle
For more information on Emergency Star ting, please refer to section 7 of the Owner ’s Manual
(Located in Driver's Panel to the left of Steering Wheel)
(Niro engine compar tment shown)
Emergency Starting* (Hybrid only)
HYBRID / PLUG-IN HYBRID SYSTEM
HYBRID/PLUG-IN

HYBRID
B
A
C
D

19*IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
HYBRID / PLUG-IN HYBRID SYSTEM
HYBRID/PLUG-IN

HYBRID
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Plug-In Hybrid Paddle Switches / Paddle Shifters Video
QR CODE
Each of the different Drive Modes allows the regenerative braking level to be set at the driver ’s preference
QUICK TIP
Regenerative Braking with Paddle Switches*
The regenerative braking system charges the battery when coasting or when you use the brakes to stop the vehicle When the Drive Mode is in ECO mode, use the paddle switches to adjust the regenerative braking level from 1 to 3, MA X and AUTO The level will be displayed on the instrument cluster A
•Pull the left paddle switch B to increase regenerative braking and deceleration Pull and hold to reach the MA X level
•Pull the right paddle switch C to decrease regenerative braking and deceleration Pull and hold to reach Smart Regeneration System (AUTO)
The paddle shifters do not operate when:
•Both paddle switches are pulled at the same time
•The vehicle is decelerating by depressing the brake pedal
•Smart Cruise Control (SCC) is active
•When the SOC gauge shows a high level
•If there is a restriction by the vehicle system
•When the drive mode is switched from sport to ECO
Smart Regeneration System*
Smart Regeneration automatically adjusts the regenerative braking level based on a vehicle being detected in front, and road conditions
To activate Smart Regeneration, pull and hold the right paddle switch or go to Vehicle Settings* on the Infotainment System Press the SETUP button or SETUP on the screen, VEHICLE and ECO VEHICLE Then SMART REGENER ATION
AUTO D will be displayed on the instrument cluster above the Regenerative Braking indicator
96%Lv １READY
DRIVE
MODE
'PS
NPSF
JOGPSNBUJPO
PO
SFHFOFSBUJWF
CSBLJOH
PS
UIF
4NBS U
3FHFOFSBUJPO
4ZTUFN

QMFBTF
SFGFS
UP
TFDUJPO

JO
UIF
0XOFS sT
.BOVBM 
4NBS U
3FHFOFSBUJPO
JT
B
TVQQMFNFOUBM
TZTUFN
GPS
UIF
ESJWFS sT
DPOWFOJFODF 
%P
OPU
TPMFMZ
SFMZ
PO
UIJT
TZTUFN
UP
TUPQ
UIF
WFIJDMF
PS
BWPJE
DPMMJTJPOT
"MXBZT
DBVUJPVTMZ
MPPL
BIFBE
UP
QSFWFOU
VOFYQFDUFE
PS
TVEEFO
TJUVBUJPOT 
4UFFSJOH
XIFFM
JMMVTUSBUJPO
JT
GPS
JMMVTUSBUJWF
QVSQPTFT
POMZ
:PVS
BDUVBM
TUFFSJOH
XIFFMCVU UPOT
BOEPS
GFBUVSFT
NBZ
EJGGFS 
"MXBZT
VTF
QFEBM
CSBLJOH
XIFO
OFDFTTBS Z
1BZ
BU UFOUJPO
UP
UIF
SPBE
DPOEJUJPO
BIFBE
BOE
BQQMZ
UIF
CSBLF
JG
OFDFTTBS Z 
96%Lv １READY
DRIVE
MODE
96%L v １READY
DRIVE
MODE
BC
L v 2
CHARGE
ECO
POWER
LH
AUTO
CHARGE
ECO
POWER
L H
Lv 2
CHARGE
ECO
POWER
L H
AUTO
CHARGE
ECO
POWER
LH
DA

34†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDNIRO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
•To use electrical accessories:
ACC position
-When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP but ton once
ON position
-When already in the ACC position and without depressing the brake pedal, press the ENGINE START/STOP but ton again
-
When in the OFF position and without depressing the brake pedal, press the ENGINE START/STOP but ton t wice
-Keeping the vehicle in ACC or ON position without turning the engine on may discharge the vehicle’s battery
QUICK TIPS
Refer to section 5 in the Owner ’s Manual for more information
LR
LR
8IFO
UIF
HFBS
TIJGU
MFWFS
JT
NPWFE
JOUP
3
3FWFSTF

BOE

UIF
WFIJDMF
JT
ESJWFO
CBDLXBSET

UIF
PVUTJEF
SFBSWJFX
NJSSPST
A will rotate downward to aid in reverse parking
To turn ON the Reverse Parking Aid Function, move switch to either the L or R mirror buttons B Both mirrors will move
To turn OFF, move switch to center
The outside rearview mirrors will automatically return to their original positions when:
•The Engine Start/Stop button is in the OFF position
•The gear shift lever is moved to any position except
R (Reverse)
Reverse Parking Aid Function*Engine Start/Stop Button†6
(But tons panel located on Driver's Door )
REMINDERS: When the outside rear view mirror but tons are not depressed, the Reverse Parking Aid Function will not operate and the outside rear view mirrors will not rotate downward
Refer to section 6 in the Owner ’s Manual for more information
REMINDERS:
•
In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the ENGINE START/STOP but ton for more than 2 seconds or 3 times successively within 3 seconds
•
If the Smar t Key bat ter y is weak or not working properly, hold the Smar t Key fob up to the ENGINE START/STOP but ton (Lock but ton side closest) and press the but ton to star t the engine
•
With the engine off, hydraulic power assist for steering and braking will be disabled and the vehicle will be more dif ficult to control
To start the engine:
•Depress the brake pedal
•
Press the ENGINE START/STOP button while gear shift is in P (Park)
•To turn the vehicle OFF, press the
ENGINE START/STOP button
To use the ENGINE START/STOP button, you must
have the Smart Key fob on your person
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Start/Stop Button Video
Kia Smart & Folding Key Fobs Video
QR CODES
ENGINESTARTSTOP
AUTO
HOLD
EV
R N
P D
DRIVER’S PANEL
DRIVER’SPA N EL
A
B
L
R

46†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDNIRO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
•Volume level bet ween different audio modes: -
When switching bet ween audio modes (AM, FM, Bluetooth® Audio, etc ), the audio system saves the previous volume level you were listening to For example, if you were listening to FM radio at volume level 20 then switched to Bluetooth® Audio and adjusted the volume level to 30, the volume level will be at 20 when you switch back to FM radio -
When using Bluetooth® Audio, the overall volume is dependent on your device’s volume If the volume is turned down low on your device it will remain low even if the system volume is turned up •This system suppor ts Android Auto™ (USB & wireless connection) and Apple CarPlay® (wireless connection only) and Android Auto™ (USB & wireless connection) and Apple CarPlay® (wireless connection only) •This system suppor ts Android Auto™ (USB & wireless connection) and Apple CarPlay® (wireless connection only) •At any time, you can interrupt Command Feedback by pressing the TALK but ton •A warning screen may appear periodically to remind users that the audio system should be operated when the engine is running to prevent bat ter y discharge •Prolonged use of the audio system in ACC mode may drain the vehicle’s battery
QUICK TIPS
INFOTAINMENTSYSTEMS
INFOTAINMENT SYSTEMS
Kia Connect w/ Navigation*†1 , 8 – FM/AM/SiriusXM®†1 4/Media (USB, Bluetooth®†2 Audio)
Press the Infotainment/climate control mode switching but ton A to toggle between Infotainment System and Climate Control Modes Press and hold the Infotainment/climate control mode switching but ton A to set the default but ton display mode
Sound Settings: To adjust the sound set tings, Press the SETUP key on the infotainment system Select the onscreen SOUND but ton, then select the menu item Use the onscreen but tons to adjust set tings Press the return but ton to save set tings
Radio Presets: To save a Preset, press and hold the desired slot or the star but ton H
OFYU
UP
PS
CFMPX
UIF
SBEJP
TUBUJPO
EJTQMBZ 
5IJT
TBWFT
UIF
DVSSFOU
TUBUJPO
JO
UIF
TFMFDUFE
TMPU
SiriusXM® Smart Favorites: In Radio mode, choose SiriusXM®, then select any of the first six favorites During song or program play, tap the Skip Backward icon to star t from the beginning of the song or program Tap the Play Live icon to return to the live broadcast
Custom Key H To program, press and hold the Custom Key Select one of the available features you would like the Custom Key to open
Map/software updates: To keep your map and software up to date, free of charge, visit the official Kia update webpage at ht tps://update kia com/US/EN/Main Note, visiting a dealer for software update may include an additional charge
Kia Connect is currently unavailable for model year 2022 or later vehicles sold or purchased in Massachuset ts See Kia Connect Terms of Ser vice at owners kia com for more information For fur ther operational information, refer to the Car Infotainment System Quick Reference Guide
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Kia Connect with Navigation Video
Navigation System Important Tips Video
Navigation System Updates Video
REMINDER: Driving while distracted is dangerous and should be avoided Drivers should remain at tentive to driving and always exercise caution when using the audio system controls while driving To help minimize driver distraction, some audio system functionalities have been modified while the vehicle is in Drive, Reverse or moved out of Park
MAPN AV SEEKTRACK RADIOMEDIASETUPPWRVOL
TUNEFILEAUTOCLIMATE
ENTER
FILE
TUNE
N AVRADIO
MEDIA SETUP
Press briefly to do the following:• FM/AM mode: Play the previous/next frequency• SiriusXM® mode: Change the channel• MEDIA mode: Change the track, file or title (except for AUX)Press and hold to do the following (over 0.8 seconds):• FM/AM mode: Move quickly through all of the frequencies When released, the system seeks the next available frequency• MEDIA mode: Rewinds or fast for wards the track or file (except for Bluetooth® Audio)
Press to Power ON/OFF Rotate to adjust Volume
Infotainment System / Climate Control mode switching button
Press to display the Nav screenPress to display the Map screen for the current position/ Voice mode
Press to go to Custom (Set) MenuPress to display SETUP/Set tings mode
Press to select MEDIA mode
Press to change Radio/SiriusXM®* Station modeIn Radio/SiriusXM®/ Media modes, rotate knob to search for stations/ channels/tracks/songs/files
A
QR CODES

49*IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
CENTER PANEL
CENTERPA N EL
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Automatic Climate Control - Touch-Sensitive Control Panel Video
Auto Defogging System (ADS) Video
Automatic Climate Control
A Driver Temperature Control knob
B Front Windshield Defroster
C Rear Windshield Defroster
D AUTO Climate
E Recirculated Air button
F Toggle between Climate and Infotainment Controls; Press and hold to set the default mode displayed
G Driver Only Climate display
H Fan Speed Control knob
I Mode Display
J A/C On-Off
K SYNC (Dual Zone)
L Passenger Climate display
M Passenger Climate Control knob
Climate Control Auto Function
Press AUTO to select Full Auto Operation The Auto setting automatically controls the air flow modes, fan speeds, air intake and air conditioning according to the temperature setting selected Turn temperature control knob A to the desired temperature
Auto Defogging System: Auto defogging is designed to reduce the fogging up of the inside of the windshield by automatically sensing the moisture of the inside of the windshield The
system will automatically change to defrost mode when needed
Auto Defogging is set ON by default To cancel Auto Defogging, press and hold the Front Defrost button for three seconds when the vehicle power is on (the defrost button light will flash three times and the ADS OFF icon will illuminate) To turn Auto Defogging on again, press and hold the Front Defrost button again for three seconds and the defrost button light will flash 6 times and ADS OFF icon will turn off
Driver Only Ventilation: Driver Only Ventilation restricts air flow to the driver ’s side vents only This can help to optimize driving range by limiting the power drawn from the battery Press DRIVER ONLY button G to enable air flow through the driver ’s side vents only
Defrost Outside and/or Inside Windshield:
1 Set Front Fan Speed H to the highest position
2 Set Temperature to Hot A
3
Press the Front Defrost button B
REMINDERS:
•
Continuous use of the climate control system in the recirculated air position may allow humidit y to increase inside the vehicle which may fog the glass and obscure visibilit y
•
Pressing any but ton during AUTO operation will deactivate the AUTO function and switch to manual mode, except for Temperature Control
•
When in AUTO mode, Air Flow mode and Fan Speed do not display on the Climate Control Display
•
Cold or warm ambient air may flow in through vents if Recirculated Air but ton is not pressed ON (LED lit)
•
Continuous use of the A /C and heater may allow the Energy Consumption to increase, especially excessive use of the heater
Air Flow Modes I:
To select Air Flow Modes, press
the Mode selection button:
Face-Level
Bi-Level
Floor-Level
Floor/Defrost-Level
•Defrost mode activates A /C and opens Fresh Air Vent to help dehumidify the air and improve defog per formance
•During Auto Operation, the A /C indicator will NOT illuminate The fan speed, air intake, air flow and air conditioning may automatically be engaged at any time to reach desired temperature and reduce humidit y
•Keep inside glass as clean as possible to reduce window fogging
QUICK TIPS
Refer to section 5 in the Owner ’s Manual for more information
SYNC
A/C
１75°F76°FDRIVERAUTO
PWRAUTOCLIMATEONLYA
B
DEFGHIJKLM
C
QR CODES

64NIRO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPED
A
(Handle located outside liftgate below Kia badge)
Hybrid Battery Cooling Duct (Hybrids only)
REMINDER: Never clean the battery vent with a WET cloth or spill liquid over the air intake. This could cause an electric shock, which could cause serious damage, injury or death
Liftgate Release Button*†1 9
Button is located on the bottom of the Liftgate lid With doors unlocked, press the Liftgate Release button A and pull the Liftgate up by the handle to open
Refer to section 5 in the Owner ’s Manual for more information
•The Liftgate must be unlocked before it can be opened by the Liftgate Release But ton
•The Liftgate unlocks automatically and then can be opened manually when the Smar t Key* is within close proximit y to the vehicle’s hatch
QUICK TIPS
Clean the air intake for the hybrid bat ter y regularly with a dr y cloth
QUICK TIP
The Hybrid Battery Cooling Duct, located under the center of the rear seat, is used to cool down the hybrid battery For safety reasons, this vent should never be blocked Doing so may cause the battery to overheat
OTHER KEY FEATURES
OTHER KEY F E AT U R E S
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Liftgate Button and Operation Video
Manual Liftgate & Key Fob Controls Video
QR CODES