MPG KIA Optima Hybrid 2013 3.G Owner's Manual

Page 126 of 394

455
Features of your vehicle
ECO Level display
When the vehicle is started, the ECO
Level display will indicate level number 4.
If you drive economically, the ECO Level
will increase. However, if you do not drive
economically, the ECO Level will
decrease.Total ECO Score display
If your ECO Level reaches its maximum,
your Total ECO Score automatically rises
by 1 point. Total ECO Score points are
saved and accumulate over time.
The image displayed on Total ECO Score
will change continuously, adding leaves
and flowers to a branch.
Instant fuel consumption
(l/100 km or MPG)
This mode calculates the instantaneous
fuel consumption every 2 seconds,
based on driving distance and amount of
fuel injected into the engine.
OTFH042300OTFH042301C
OTFH042065C

Page 127 of 394

Features of your vehicle
56
4
Average fuel consumption (if equipped)
(l/100 km or MPG)
This mode calculates the average fuel
consumption from the total fuel used and
the distance since the last average con-
sumption reset. The total fuel used is cal-
culated from the fuel consumption input.
For an accurate calculation, drive more
than 50 m (0.03 miles).
Pressing the RESET button for more than
1 second, when the average fuel con-
sumption is being displayed, clears the
average fuel consumption to zero (---).
If the vehicle speed exceeds 1 km/h after
refueled more than 6 l , the average fuel
consumption will be cleared to zero (---). Distance to empty (mi. or km)
This mode indicates the estimated dis-
tance to empty based on the current fuel
in the fuel tank and the amount of fuel
delivered to the engine. When the
remaining distance is below 50 km (30
miles), “---” will be displayed and the dis-
tance to empty indicator will blink.
The meter’s working range is from 50 to
990 km (30 to 990 miles).
Average speed (MPH or km/h)
This mode calculates the average speed
of the vehicle since the last average
speed reset.
Even if the vehicle is not in motion, the
average speed keeps going while the
engine is running.
Pressing the RESET button for more
than 1 second, when the average speed
is being displayed, clears the average
speed to zero (---).
OTFH042064COTFH042062COTFH042066C