engine KIA OPTIMA PLUG-IN HYBRID 2017 Owners Manual

INTERIOR LIGHT
CAUTION
Do not use the interior lights for ex‐tended periods when the engine isnot running.It may cause battery discharge.
WARNING
Do not use the interior lights whendriving in the dark. Accidents couldhappen because the view may beobscured by interior lights.
Automatic turn off function (if
equipped)
The interior lights automatically turn
off approximately 20 minutes after the ignition switch is turned off.
If your vehicle is equipped with the
theft alarm system, the interior lights
automatically turns off approximately 3 seconds after the system is armed
stage.
Map lamp
5ZQF
"
0+')-
5ZQF
#
0+'
• (2): - The map lamp and room lamp
comes on when a door is opened.
The lamps go out after approxi‐
mately 30 seconds.
- The map lamp and room lamp comes on for approximately 30
seconds when doors are unlocked
with a transmitter or smart key as
long as the doors are not opened.
- The map lamp and room lamp will stay on for approximately 20 mi‐
nutes if a door is opened with the
ignition switch in the ACC or
LOCK/OFF position.
- The map lamp and room lamp will stay on continuously if the door is
opened with the ignition switch inthe ON position.
- The map lamp and room lamp will go out immediately if the ignition
switch is changed to the ON posi‐
tion or all doors are locked.
- To turn off the DOOR mode, press the DOOR button (2) once again
(not pressed).
Features of your vehicle
5-126

CLIMATE CONTROL SYSTEM

System operation
Ventilation
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desired speed.
5. If dehumidified heating is desired, turn the air conditioning system (if
equipped) on.
Operation tips
• To keep dust or unpleasant fumes from entering the vehicle through the
ventilation system, temporarily set
the air intake control to the recircula‐
ted air position. Be sure to return the control to the fresh air position when
the irritation has passed to keep
fresh air in the vehicle. This will help
keep the driver alert and comforta‐
ble.
• Air for the heating/cooling system is drawn in through the grilles just
ahead of the windshield. Care should
be taken that these are not blocked
by leaves, snow, ice or other obstruc‐
tions.
• To prevent interior fog on the wind‐ shield, set the air intake control to
the fresh air position and fan speed
to the desired position, turn on the
air conditioning system, and adjust the temperature control to desired
temperature.
• If the windshield fogs up, set the mode to the
or position.
CAUTION
Operating the blower when the igni‐tion switch is in the ON positioncould cause the battery to discharge.Operate the blower when the engineis running.
Air conditioning
Kia air conditioning systems are filled
with R-134a or R-1234yf refrigerant. 1. Start the hybrid system. Push the air conditioning button.
2. Set the mode to the
position.
3. Set the air intake control to the outside air or recirculated air posi‐
tion.
4. Adjust the fan speed control and temperature control to maintain
maximum comfort.
Features of your vehicle
5-132

Air conditioning refrigerant label
5ZQF
"
&YBNQMF
5ZQF
#
❈
The actual air conditioning refriger‐
ant label in the vehicle may differ
from the illustration. Each symbol and specification on air
conditioning refrigerant label means as
below: 1. Classification of refrigerant
2. Amount of refrigerant
3. Classification of compressor lubri‐ cant
You can find out which air conditioning
refrigerant is applied your vehicle at the label inside of the engine room.
Refer to L

Power outlet
0+'
The power outlet is designed to provide
power for mobile telephones or other devices designed to operate with vehi‐
cle electrical systems. The devices
should draw less than 10 amps with the engine running.
CAUTION
•Use the power outlet only whenthe engine is running and removethe accessory plug after use. Usingthe accessory plug for prolongedperiods of time with the engine offcould cause the battery to dis‐charge.
•Only use 12V electric accessorieswhich are less than 10A in electriccapacity.
•Adjust the air-conditioner or heat‐er to the lowest operating levelwhen using the power outlet.
•Close the cover when not in use.
•Some electronic devices can causeelectronic interference when plug‐ged into a vehicle’s power outlet.These devices may cause exces‐sive audio static and malfunctionsin other electronic systems or de‐vices used in your vehicle.
•Refrain from using the heater orA/C if you need to use the multi‐purpose socket. If the heater orA/C has to be used simultaneously,have it to the lowest setting.
(Continued)
(Continued)
•Some add-on electrical equipmentwill induce electromagnetic inter‐ference. This will lead to subse‐quent malfunction or hinder goodreception of the Audio/Video andelectrical system.
•Always make sure that electricadd-ons are fully plugged into themultipurpose sockets. Insecurecontacts may lead to electricalmalfunctions.
WARNING
Do not put a finger or a foreign ele‐ment (pin, etc.) into a power outletand do not touch with a wet hand.You may get an electric shock.

5-157
5
Features of your vehicle

USB charger (if equipped)
0+'-
The USB charger is designed to re‐
charge batteries of small size electrical devices using a USB cable. The electrical
devices can be recharged when the En‐
gine Start/Stop button is in ACC/ON/ START position.
The battery charging state may be
monitored on the electrical device.
Disconnect the USB cable from the USB
port after use. • Some devices are not supported for
fast charging but will be charged withnormal speed.
• Use the USB charger when the engine is running to prevent battery dis‐
charge. • Only devices that fits the USB port
can be used.
• The USB charger can be used only for battery charging purposes.
• Battery chargers cannot be charged.
Wireless smart phone charging
system (if equipped)
A wireless smart phone charging sys‐
tem located in front of the center con‐ sole.
Firmly close all doors, and turn the igni‐
tion to ACC or IGN ON. To start wireless
charging, place the smart phone equip‐ ped with wireless charging function on
the wireless charging pad. For best wireless charging results, place
the smart phone on the center of the charging pad.
The wireless charging system is de‐
signed for one smart phone equipped
with QI per single usage only. Please re‐ fer to the smart phone accessory cover
or the smart phone manufacturer
homepage to check whether your smart phone supports QI function.
Wireless smart phone charging
1. Remove any object on the smart phone charging pad including the
smart key. If there is any foreign
object on the pad other than a
smart phone, the wireless charging
function may not operate properly.
2. Place the smart phone on the cen‐ ter of the wireless charging pad.
3. The indicator light will change to orange once the wireless chargingbegins. After the charging is com‐
plete, the orange light will change
to green.
4. You can choose to turn the wireless charging function to either ON or
OFF by selecting the USM on the in‐
strument cluster. (Please refer to
L

Aux, USB port
0+'
You can use an aux port to connect au‐
dio devices and an UêB port to plug in
an UêB or içod ®
.
NOTICE
When using a portable audio device
connected to the power outlet, noise
may occur during playback. If this
happens, use the power source of
the portable audio device.
❈ içod ®
is a trademark of Apple Inc.
How vehicle radio works
FM reception
0+'-
AM and FM radio signals are broadcast
from transmitter towers located around your city. They are intercepted
by the radio antenna on your vehicle.
This signal is then received by the radio and sent to your vehicle speakers. When a strong radio signal has reached
your vehicle, the precise engineering of
your audio system ensures the best possible quality reproduction. However,
in some cases the signal coming to your
vehicle may not be strong and clear.
This can be due to factors such as the distance from the radio station, close‐
ness of other strong radio stations or
the presence of buildings, bridges or other large obstructions in the area.
Audio system
6-04

(Continued)
•If you want to change the positionof device installation, please in‐quire with your place of purchaseor service maintenance center.Technical expertise is required toinstall or disassemble the device.
•Turn on the car ignition before us‐ing this device. Do not operate theaudio system for long periods oftime with the ignition turned offas such operations may lead tobattery discharge.
•Do not subject the device to severeshock or impact. Direct pressureonto the front side of the monitormay cause damage to the LCD ortouch screen.
•When cleaning the device, makesure to turn off the device and usea dry and smooth cloth. Never usetough materials, chemical cloths,or solvents (alcohol, benzene, thin‐ners, etc.) as such materials maydamage the device panel or causecolor/quality deterioration.
(Continued)
(Continued)
•Do not place beverages close tothe audio system. Spilling beverag‐es may lead to system malfunc‐tion.
•In case of product malfunction,please contact your place of pur‐chase or After Service center.
•Placing the audio system within anelectromagnetic environment mayresult in noise interference.
NOTICE
nUsing the UêB device
•To use an external UêB device,
make sure the device is not con‐
nected when starting up the vehi‐
cle. Connect the device after start‐
ing up.
•If you start the engine when the
UêB device is connected, it may
damage the UêB device. (UêB
flashdrives are very sensitive to
electric shock.)
(Continued)
(Continued)
•If the engine is started up or
turned off while the external UêB
device is connected, the external
UêB device may not work.
•The êystem may not play inau‐
thentic Mç3 or WMA files.
1.It can only play Mç3 files with
the compression rate between
8Kbps ~ 320Kbps.
2.It can only play WMA music files
with the compression rate be‐
tween 8Kbps ~ 320Kbps.
•Take precautions for static elec‐
tricity when connecting or discon‐
necting the external UêB device.
•An encrypted Mç3 çLAYEé is not
recognizable.
•Depending on the condition of the
external UêB device, the connec‐
ted external UêB device can be un‐
recognizable.
(Continued)

6-15
6
Audio system

- File name : Maximum 64 Englishcharacters
- Folder name : Max 32 English characters
❈ Using the scroll feature allows you
to see the entire name of files with
names that are too long to be dis‐
played at once.
• Compatibility by Disc Type 1. çlaying MIXED CDs : First plays the audio CD, then plays the com‐
pressed file(s).
2. çlaying EXTéA CDs : First plays the audio CD, then plays the com‐
pressed file(s).
3. çlaying multisession CDs : çlays in order of sessions- MIXED CD : CD type in which both Mç3 and audio CD files arerecognized in one disc.
- Multisession CD CD type that in‐ cludes more than two sessions.
Different from Extra CDs, multi‐ session CDs are recorded bysessions and have no media lim‐
itation.
• çrecautions upon Writing CDs 1. In all cases except when creating
multisession discs, check the close
session option before creating the disc. Though product malfunctions
will not occur, some time may be
required for the device to check
whether the session state is
closed (approximately 25 seconds).
(Additional time may also be re‐
quired depending on the numberof folders or files.)
2. Changing the Mç3/WMA file exten‐ sions or changing files of other ex‐
tensions to Mç3/WMA may result
in product malfunction.
3. When naming files with Mç3/WMA file extensions, write using only
Korean and English. (Languages
other than Korean and English are
not supported and are displayed asblank.)
4. Unauthorized use or duplication of music files are prohibited by law.
5. çrolonged use of CD-é/CD-éW discs that do not satisfy relatedstandards and/or specifications
could result in product malfunc‐
tion.NOTICE
nUsing the UêB Device
•Connect the UêB device after
turning on the engine. The UêB
device may become damaged if it
is already connected when the ig‐
nition is turned on. The UêB device
may not operate properly if the
car ignition is turned on or off with
the UêB device connected.
•Heed caution to static electricity
when connecting/disconnecting
UêB devices.
•Encoded Mç3 çlayers will not be
recognized when connected as an
external device.
•When connecting an external UêB
device, the device may not proper‐
ly recognize the UêB is in some
states.
•Only products formatted with
byte/sectors under 64Kbyte will
be recognized.
(Continued)
Audio system
6-58

Before driving............................................................................ 7-04Before entering vehicle........................................................ 7-04
Necessary inspections..........................................................7-04
Before starting...................................................................... 7-04
Engine start/stop button......................................................... 7-06 Illuminated engine start/stop button................................ 7-06
Engine start/stop button position..................................... 7-06
Starting the hybrid system................................................. 7-08
Automatic transaxle................................................................. 7-11 Automatic transaxle operation...........................................7-11
Good driving practices.......................................................... 7-15
Brake system.............................................................................7-17 Power brakes ........................................................................ 7-17
Foot parking brake................................................................ 7-18
Electronic parking brake (EPB) .......................................... 7-19
AUTO HOLD ........................................................................... 7-24
Warning messages................................................................7-26
Anti-lock brake system (ABS).............................................7-28
Electronic stability control (ESC) ....................................... 7-30
Vehicle stability management (VSM) ............................... 7-33
Hill-start assist control (HAC) ............................................ 7-34
Emergency Stop Signal (ESS) ............................................. 7-35
Good braking practices.........................................................7-35
Autonomous emergency braking (AEB) ............................... 7-37 System setting and activation............................................7-37
AEB warning message and system control......................7-39
Brake operation..................................................................... 7-40
Sensor to detect the distance from the vehicle
in front (front radar)............................................................ 7-41
System malfunction............................................................. 7-42 Limitation of the system..................................................... 7-43
Recognizing pedestrians...................................................... 7-45
Cruise control system ............................................................. 7-47 Cruise control switch............................................................ 7-48
To set cruise control speed................................................. 7-48
To increase cruise control set speed................................. 7-49
To decrease the cruising speed.......................................... 7-50
To temporarily accelerate with the cruise control on.... 7-50
To cancel cruise control........................................................7-50
To resume cruising speed at more than approxi‐
mately 30 km/h..................................................................... 7-51
To turn cruise control off.................................................... 7-51
Speed Limit Control System ................................................... 7-52 To set speed limit.................................................................. 7-52
To turn off the speed limit control.................................... 7-53
Speed Limit Information Function (SLIF) ............................. 7-55 SLIF activation/deactivation................................................ 7-55
Operation................................................................................ 7-56
Display.....................................................................................7-56
Driver's attention.................................................................. 7-58
Advanced Smart Cruise Control system .............................. 7-59 Speed setting......................................................................... 7-60
Vehicle to vehicle distance setting..................................... 7-64
To adjust the sensitivity of advanced smart
cruise control......................................................................... 7-69
To convert to cruise control mode..................................... 7-69
Limitations of the system................................................... 7-70
Drive mode integrated control system ................................ 7-75 Hybrid vehicle.........................................................................7-75
Drive mode integrated control system ................................ 7-77
Driving your vehicle

7

WARNING
nENGINE EXHAUST CAN BE DANGEROUS!
Engine exhaust fumes can be extremely dangerous. If, at any time, you smell exhaust fumes inside the vehicle, open thewindows immediately.•Do not inhale exhaust fumes.Exhaust fumes contain carbon monoxide, a colorless, odorless gas that can cause unconsciousness and death by asphyx‐iation.
•Be sure the exhaust system does not leak.The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose.If you hear a change in the sound of the exhaust or if you drive over something that strikes the underneath side of thevehicle, we recommend that the system be checked by an authorized Kia dealer.
•Do not run the engine in an enclosed area.Letting the engine idle in your garage, even with the garage door open, is a hazardous practice. Never run the engine inyour garage any longer than it takes to start the engine and back the vehicle out.
•Avoid idling the engine for prolonged periods with people inside the vehicle.If it is necessary to idle the engine for a prolonged period with people inside the vehicle, be sure to do so only in an openarea with the air intake set at "Fresh" and fan operating at one of the higher speeds so fresh air is drawn into the interi‐or.
If you must drive with the tailgate/trunk open because you are carrying objects that make this necessary:1.Close all windows.
2.Open side vents.
3.Set the air intake control at "Fresh", the air flow control at "Floor" or "Face" and the fan at one of the higher speeds.
To assure proper operation of the ventilation system, be sure the ventilation air intakes located just in front of the wind‐shield are kept clear of snow, ice, leaves or other obstructions.


7-03
7
Driving your vehicle