service interval reset KIA SEDONA 2015 Features and Functions Guide

Page 8 of 50

6
Trip Computer / Tripmeter
The Trip Computer is a driver information
system that displays information related
to driving on the display when the ENGINE
START/STOP button is in the ON position .
To cycle through the LCD Instrument Cluster
modes, press the Mode button A .
To select and enter Trip Computer mode ,
roll the OK button B and then press to enter .
To cycle through and select the different
screens (Fuel Economy, Trip A, Trip B), roll
the OK button B and then press enter .
When displaying TRIP A or TRIP B screens,
press and hold the OK button B to reset the
Tripmeter to zero .
Press the Return button C to go back to the
previous mode/item
(Type B Cluster)
FUEL ECONOMY
• R ANGE • Average MPG • Instant MPG
TRIP A
• Tripmeter A • Average MPH • Elapsed Time (E / T )
TRIP B
• Tripmeter B • Average MPH • Elapsed Time (E / T )
DIGITAL SPEED
REMINDERS:
• Appearance of Tripmeter display may differ as equipped
• All stored driving information (except Odometer and Range) is reset if the battery is disconnected
LCD Instrument Cluster Modes
Press Mode button A to cycle through different LCD Instrument
Cluster Modes:
Trip Computer Mode: Displays driving information
for tripmeter, fuel economy, etc .
A/V Mode: Displays the state of the A / V System
Turn-by-Turn Mode*: Displays the state of the
Navigation system
Information Modes: Informs on service intervals
and pressure status of each tire
User Settings Mode: Change settings of the lamps
and other features
Advanced Smart Cruise Control (ASCC) / Lane
Departure Warning System (LDWS)*: Displays the
state of the ASCC and LDWS
Your vehicle’s steering wheel buttons may differ from those in the illustrations.
Range
Aver age
0 10 20 30
2 4.8 MPG
729 mi
N
Hold : R e se tOKMODE CRUISE
CANCEL
RES
OK
SET
MODE CRUISE
CANCEL
RES
OK
SET
MODE CRUISE
CANCEL
RES
OK
SET
MODE CRUISE
CANCEL
RES
OK
SET
( Type B/C; Buttons located on Steering Wheel)
A
B
C
SEDONA FEATURES & FUNCTIONS GUIDE
*IF EQUIPPED
INSTRUMENT CLUSTER

Page 9 of 50

7
Service Interval Setting
To set the service interval in User
Settings mode:
•Press the Mode button A to
cycle to User Settings and press
the OK button B to enter
•If Service Interval is OFF, press
the OK button B to turn ON
•Roll the OK button B to select /
change the interval setting
•Press the OK button B to select
the interval
To enter the User Settings mode in the LCD
Instrument Cluster Modes, press the Mode
button A when the vehicle is at a standstill
and with the ENGINE START/ STOP button in
the ON position and select User Settings
by pressing the OK button B .
You can navigate the selections on the
display by rolling the OK button B, and then
selecting the item by pressing the OK button B .
Press the Return button C to go back to the previous
mode/item
User Settings mode (Type B/C clusters):
Driving Assist •Smart Cruise Control Response*
•Rear Cross Traffic Alert*
•Forward Collision Warning*
Door/Liftgate •Two Press Unlock
•Horn Feedback
•Smart Liftgate*
Lights •One-Touch Turn Signal
•Head Lamp Delay*
•Welcome Light*
User Settings
Sound •Park Assist System Volume*
•Blind Spot Detection Sound*
•Welcome Sound*
Seat/Steering •Easy Seat Access*
•Steering Position
Service Interval •ON/OFF
•Set mileage/months
Other Features •Fuel Economy Auto Reset ON/OFF
•Fuel Economy Unit
•Temperature Unit
•Language
To enter Service Mode, press the Mode button A, scroll to
Service Mode by rolling the OK button B . Then press
the OK button B to enter . System will display number of
miles remaining until next service is due, as well as the
type of service due .
When service is required, the following will be displayed:
Service Required .
To reset the Service Mode system, press and hold the OK
button B for more than 1 second .
Press the Return button C to go back to the previous
mode/item
To turn Service In OFF, go to User Settings .
Service Mode To view these videos on your mobile device, snap these QR Code or visit the listed website .
Refer to page 2 for more information .
LCD Display: Maintenance Video
LCD Display Video
QR CODES
www.KuTechVideos.com/yp13/2015
www.KuTechVideos.com/yp13/2015
(Type B cluster)
Se rv ic e Interval
Off
N
Service required
- 3 0 00 0miH old : R e se tOK
N
Service Interval
-3 0 00 0miH old : R e se tOK
N
(Buttons located on right side of steering wheel)
MODE CRUISE
CANCEL
RES
OKSET
MODE CRUISE
CANCEL
RES
OKSET
MODE CRUISE
CANCEL
RESOKSET
MODE CRUISE
CANCEL
RES
OKSET
A
B
C
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS. *IF EQUIPPED
INSTRUMENT CLUSTER