lock KIA SELTOS 2021 Navigation System Quick Reference Guide

10-6
Phone projection
SymptomPossible cause Solution
The phone projection function
is not performed when a
smartphone is connected using
a USB cable. Phone projection is not
supported.
Visit the website to check whether your smartphone supports the
phone projection.

Android Auto: https://support.google.com/androidauto
Apple CarPlay: http://www.apple.com/ios/carplay
The function is inactive.
 On the All Menus screen, press Setup
>
Device Connections,
select the function to use, and then turn on the phone projection
option.
 Make sure that the phone projection is not disabled in the
application settings or block-out settings on your smartphone.
Smartphone is encountered with
poor operation or malfunction.
 Check that the smartphone battery level is not too low.
Recognition may not work properly when the battery level is too
low.
The phone projection may not work properly when the signal
strength is weak.
When the smartphone is locked, first unlock it.
Initialize the smartphone and connect the device again.
A black screen appears when
the phone projection is
activated or in use. The smartphone malfunctions.

Remove the USB cable from the smartphone and connect the
device again.
Initialize the smartphone and connect the device again.

10-10
Available functions in the rear seat
(if equipped)
Rear-seat remote control locked
Rear-seat sleep mode On
Front-seat driver is having a conversation with a rear-
seat occupant
Wireless charging
Wireless charging in progress
Wireless charging complete
Wireless charging failure
A
A
Some icons may not appear depending on the vehicle model
and specifications.
UVO
Talking with a UVO phone
UVO phone’s microphone off
Vehicle location sharing
Sending the vehicle location
Receiving the vehicle location
Sending/receiving the vehicle location
UVO network’s signal strength
911 Connect activated
System update
Scheduling the update
Updating