start stop button KIA SELTOS 2021 Navigation System Quick Reference Guide

3
ÜSystem handling
Do NOT apply excessive force to the system.
•When you apply excessive pressure to the screen, the LCD panel or touch
panel may get damaged.
To clean the screen or button panel, first turn off the vehicle
and then use a dry, soft cloth to wipe it.
•Do not wipe using a rough or hard cloth, chemical fiber, organic solvent (e.g.
alcohol, benzene, thinner), or air freshener. The panel surface may become
scratched or damaged due to a chemical reaction.
When you install an air freshener on the air conditioner vent,
the surface may be deformed due to leakage.
A
A
If you experience any problems with the system, contact your
place of purchase or dealer.
Safety Precautions
Be sure to keep the following instructions. Otherwise, it may
cause minor injury or system damage.
ÜOperation
Use the system with the vehicle started.
•When you use the system for a long time with the vehicle stopped, it may\

cause battery discharge.
Do NOT arbitrarily install an unauthorized aftermarket
product in your vehicle.
•Using unapproved products may cause an error while using the system.
•System errors caused by installing unapproved products are not covered
under the warranty.

5
ÜSystem handling
Do NOT apply excessive force to the system.
 When you apply excessive pressure to the screen, the LCD panel or touch
panel may get damaged.
To clean the screen or button panel, first turn off the vehicle
and then use a dry, soft cloth to wipe it.
Do not wipe using a rough or hard cloth, chemical fiber, organic solvent (e.g.
alcohol, benzene, thinner), or air freshener. The panel surface may become
scratched or damaged due to a chemical reaction.
When you install an air freshener on the air conditioner vent,
the surface may be deformed due to leakage.
A
A
If you experience any problems with the system, contact your
place of purchase or dealer.
Be sure to keep the following instructions. Otherwise, it may
cause minor injury or system damage.
ÜOperation
Use the system with the vehicle started.
 When you use the system for a long time with the vehicle stopped, it may
cause battery discharge.
Do NOT arbitrarily install an unauthorized aftermarket
product in your vehicle.
Using unapproved products may cause an error while using the system.
System errors caused by installing unapproved products are not covered
under the warranty.
Safety Precautions

4-4
Playing the previous file
You can play the previous file during playback in the USB device.
Perform any of the following methods:
On the USB music playback screen, press within 3
seconds during playback.
 On the control panel, press the [
SEEK] button within 3
seconds during playback.
A
A
To play the previous music during playback, press
twice
or pressing the [
SEEK] button on the control panel twice
after 3 seconds from the start of the playback.
A
A
You can also run the function by using the Move lever/button
on the steering wheel.
A
A
On the control panel, turn the [TUNE/FILE] knob to search for
a music file and press the knob within 5 seconds to play it.
A
A
When there is no input for 5 seconds, the search stops and
the system displays the information of the current file.
Fast forward
By using the fast forward function, you can listen to music in the
USB device from the desired point during playback.
Perform any of the following methods:
On the USB music playback screen, press and hold .
On the control panel, press and hold the [
TRACK ] button.
A
A
You can also run the function by using the Move lever/button
on the steering wheel.
Resuming playback of the current music
You can play the current music in the USB device from the
beginning.
Perform any of the following methods:
On the USB music playback screen, press after 3 seconds
during playback.
 On the control panel, press the [
SEEK] button after 3
seconds during playback.
A
A
You can also run the function by using the Move lever/button
on the steering wheel.

7-8
CommandFunction
Cancel Route Stop the navigation guidance and
cancel your current destination.
Destination
Information View information on the distance and
time to your current destination.
Route Options Find another route.
Show Route View the entire route on the map.
A
A
When you use a command starting with "Find," the system
searches for locations within the state or province where your
vehicle is currently located. To search for locations in another
state or province, say the state or province name first and
then say the location you want.
A
A
Some commands, such as "Cancel Route " or "Show Route,"
are available only when a destination is set.Command Function
Previous Searches You can select a destination from the
list of destinations that have recently
been searched for. Say the number of
the location you want.
Traffic Information Access the traffic information screen.
Go Home Set the location saved to the Home
shortcut button in your address book
as your destination.
Go to Work Set the location saved to the Work
shortcut button in your address book
as your destination.
Change Home You can change the location saved as
your home.
Change Work You can change the location saved as
your work.
Pause Route Pause the navigation guidance.
Resume Route Resume the navigation guidance.
Turn Guidance On Unmute the navigation guidance.
Turn Guidance Off Mute the navigation guidance.

7-20
Playing a voice memo
You can select and play a recorded voice memo.
From the list of Voice Memos, press the desired voice
memo.
Recording a voice memo
1 On the Voice Memo screen, press .
It starts recording a voice memo.
2 When recording is finished, press on the
screen or press the End Call button on the
steering wheel.
The voice memo is automatically saved.
A
A
To temporarily stop recording, press
.
A
A
When recording starts, the other audio functions are muted
or playback is paused.
A
A
When you make or receive a call while recording, the
recording is paused.
A
A
When you make an emergency call or you are connected to
an emergency call after airbag deployment, the recording is
stopped and the recorded voice memo is automatically saved.

10-2
Solutions
Before reporting a malfunctioning system, refer to the following table and see if you can identify and fix the problem. If the problem persists
or you are unable to locate your specific need, contact your place of purchase or dealer.
Sound and display
SymptomPossible cause Solution
A blank screen appears and
sound is not audible. The system is turned off.

Check that the start switch is in “ACC” or “ON.”
Press the Power button on the control panel to turn on the
system.
Sound volume is too low. Turn the Volume knob on the control panel to adjust the volume.
Sound is muted. Press the Mute button on the steering wheel to unmute.
Sound is audible from only one
side of the speakers. Sound is imbalanced.
On the All Menus screen, press Setup >
Sound >
Sound Tuning
and adjust the sound outputs for the left and right speakers.
The sound is cut off or noise is
heard. Vibration occurs in the system.
When the system vibrates, the sound may be cut off or noise may
occur. This is not a system failure. The system is restored as soon as
the vibration stops.