tire type KIA SOUL EV 2015 Features and Functions Guide

SOUL EV FEATURES & FUNCTIONS GUIDE36*IF EQUIPPED
OTHER KEY FEATURES
Opening the Hood:
1. Located on the bottom left of the driver’s panel, pull the Hood Release Lever
A to unlatch the Hood
2. In the front of the vehicle, lift the Hood slightly, push the secondary Latch
B up inside of the Hood’s center and lift the Hood
REMINDER: While lowering and closing, keep hands away from under the Hood .
Hood Release Lever and Latch
Closing the Hood:
Lower the Hood by pressing the front center of the Hood. Then, press
down to securely lock in place.
AB


Tire Mobility Kit Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website .
Refer to page 2 for more
information .
www.KuTechVideos.com/ps23/2015
QR CODETire Mobility Kit
REMINDERS:

 The Tire Mobility Kit requires
the use of the 12V/15A /180W
Power Outlet, which is located
on the right side of the outlet /aux
port area

 After tire is properly sealed, drive
cautiously at no more than a total
distance speed of 50 mph for no
longer than a maximum distance
of up to 120 miles
The Tire Mobility Kit may temporarily seal
certain types of tire damage.
For operational information, please refer to
section 6 of your Owner’s Manual.
C Sealant Bottle
D Compressor



The Tire Mobility Kit is a temporary x and
is to be used for one tire only; the tire should
be inspected as soon as possible

The kit should only be used for sealing/
inating passenger car tires; do not use for
inating any other type of tires

Some damaged tires cannot be sealed
completely; do not use the kit if a tire is
damaged beyond repair
QUICK TIPS
D
C