display KIA STINGER 2023 Features and Functions Guide

ADAS
ADVANCED DRIVER ASSISTANCE SYSTEM (ADAS)
ALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS . †LEGAL DISCL AIMERS ON BACK INSIDE COVER*IF EQUIPPED15
Blind-spot View Monitor (BVM)*†3
Blind-spot View Monitor is designed to display the rear and side of the vehicle blind-spot areas in the Instrument Cluster LCD A when the turn signal is turned on .
To turn BVM on, press and hold the LCD Mode button B on the right side of the Steering Wheel to go to VEHICLE Settings* in the Infotainment System or press the SETUP key/button on the Infotainment System . Select VEHICLE, DRIVER ASSISTANCE > Blind-spot Safety > Blind-spot View .
When operating the turn signal C, BVM displays video of the blind-spot view for the direction indicated .
Images are for illustrative purposes only and may not reflect actual feature or operation . See section 6 in the Owner’s Manual for more information .
(LCD display showing right side of vehicle)
0
1 2
3
4
x1000 rpm5
6
7
8
C HE F
2030
40
10 0
12 0
1 4 0
1 6 0
1 8 0
50
80
60
1
0
0
MPHC
A
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Blind-spot View Monitor (BVM) Video
QR CODE
OK
(But ton layout on right of steering wheel)
B

ADAS
Blind-spot Collision-Avoidance Assist (BCA)† 3 (continued)
REMINDERS:
•
BCA will not issue a warning if the vehicle speed is 6 mph or more above the surrounding vehicles
•
When BCA is ON and the ignition is cycled, BCA returns to its previous state
•
BCA is a supplemental system . Do not rely solely on this system . Always pay at tention to the road and drive safely
ADVANCED DRIVER ASSISTANCE SYSTEM (ADAS)
When engaged, BCA is not a substitute for safe and proper driving . Always drive safely and use caution .
Refer to section 5 in the Owner’s Manual for more information .
The images on this page are for illustrative purposes only and may not reflect actual feature or operation .
REMINDER: SEW may not detect all objects and the occupants should always be mindful of their surroundings .
Safe Exit Warning (SEW)*†4
Safe Exit Warning can help prevent passengers from opening their door by displaying a warning message on the Instrument Cluster and sounding an audible warning when a vehicle is detected, approaching from behind, after your vehicle has stopped .
To turn on SEW, go to User Settings* in the Instrument cluster or press SETUP in the Vehicle Settings* in the infotainment system, then select Driver Assistance, Blind-spot Safety, and select Safe Exit Warning .
Images are for illustrative purposes only and may not reflect actual feature or operation .
See section 4 in the Owner’s Manual for more information .
Watch for traffic
"-8":4
$)&$,
5)&
08/&3 s4
."/6"-
'03
$0.1-&5&
01&3 "5*/(
*/'03."5*0/
"/%
4"'&5 :
8"3/*/(4
õ-&("-
%*4$- "*.&34
0/
#"$,
*/4*%&
$07&3*'
&26*11&%17
•
Warning Volume can be adjusted in the User Set tings in the Instrument Cluster or the Vehicle Set tings* on the infotainment system . Go to Driver Assistance, then Warning Volume
•
BCA will activate when:
-The system is turned on
-Other vehicles are detected on the rear sides of the vehicle
-A Collision Warning can be issued when the vehicle speed is above approximately 12 mph
-A Collision-Avoidance Assist can be issued when the vehicle speed is above approximately 40 mph
QUICK TIPS

ADAS
ADVANCED DRIVER ASSISTANCE SYSTEM (ADAS)
†LEGAL DISCL AIMERS ON BACK INSIDE COVER*IF EQUIPPED18STINGER FEATURES & FUNCTIONS GUIDE
OK
(But ton layout on right of steering wheel)
Driver Attention Warning (DAW)†4
Driver Attention Warning is designed to alert the driver if it detects inattentive driving practices and, in certain situations, can give a warning signal to take a break from driving .
•Inattentive Driving Warning: DAW will inform the driver of the driver ’s attention level and will recommend taking a break when it falls below a certain level
•Leading Vehicle Departure Alert: DAW will inform the driver when the front vehicle departs from a stop
If DAW is activated, the DAW information will appear on the Instrument Cluster LCD Display when you select the Driving Assist menu . A message, “Consider taking a break,” A appears on the LCD and a warning sounds to suggest the driver take a break when the driver ’s attention level becomes low B .
DAW User Settings:
•DAW can be turned on/off by going to the User Settings* in the Instrument Cluster or the Vehicle Settings* in the Infotainment System
•Only adjust settings when the vehicle is at a standstill, gear shift is in Park and the ignition is turned on or the Engine Start/Stop button* in the ON position
•To access User settings* in the Instrument Cluster - Press the Mode button C on the Steering Wheel to toggle to User Settings . Press the OK button D up/down to toggle to Driver Assistance, then Driver Attention Warning and select Inattentive Driving
•To access Vehicle settings* in the Infotainment System – Press the SETUP key or the onscreen SETUP button . Press VEHICLE to enter Vehicle Settings . Select Driver Assistance, then Driver Attention Warning and select Inattentive Driving
•DAW Warning Timing – When in the Driver Assistance menu, select
Warning Timing and one of the following:
–Normal: Driver Attention Warning warns the driver of his/her inattentive driving practices
–Late: Driver Attention Warning warns the driver of his/her inattentive driving practices later than Normal mode
REMINDERS:
•
The set-up of DAW will be maintained, as selected, when the ignition is cycled
•
When activated, DAW does not display the “Consider taking a break ” message when the total trip driving time is less than 10 minutes
•
DAW will enter a standby mode if the camera does not detect the lanes
Consider taking a break
Attention Level
High
When engaged, Driver Attention Warning is not a substitute for safe driving and may not detect all instances of inattentive driving practices . Failure to pay attention to travel conditions and vehicle operation could result in loss of vehicle control . Always drive safely and use caution .
Refer to section 5 in the Owner’s Manual for more information .
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Driver Attention Warning (DAW) Video
QR CODE
ABC
D

ADAS
ADVANCED DRIVER ASSISTANCE SYSTEM (ADAS)
Navigation-based Smart Cruise Control will help automatically adjust vehicle speed when driving on highways with posted speed limits by using road information from the navigation system, while Smart Cruise Control
is operating .
Smart Cruise Control is designed to maintain a predetermined distance from vehicles detected ahead by automatically adjusting the driving speed as needed . When traffic is detected, the vehicle will slow down to maintain a set distance behind traffic without depressing the accelerator or brake pedal .
Highway Curve Zone Auto Slowdown: NSCC can automatically adjust the vehicle speed when it detects a curved road ahead and when it receives road information from the navigation system . When NSCC detects a curve ahead, NSCC activates and reduces the vehicle speed, and the AUTO icon A (nex t
page) in the NSCC indicator turns green . When the vehicle passes the curved road, the vehicle may return to its previously set speed .
Highway Auto Speed Change: If the set speed is set to the current posted speed limit on the highway during NSCC operation, the set speed is changed automatically whenever the posted speed limit changes and when it receives information from the navigation system .
SCC Operation: With SCC turned on and activated, the vehicle distance set, and the system detects a vehicle slowing or stopping, the system can bring the vehicle to a complete stop . When the vehicle ahead starts to move forward, SCC re-engages . If the vehicle ahead stops for more than 3 seconds, the accelerator pedal or the + – button B must be pressed to start moving the vehicle .
SCC will adjust acceleration based on the drive mode selected in the Drive Mode Integrated Control system .
NSCC Settings:
To turn on/set/adjust the NSCC speed: Press the Driving Assist button C on the Steering Wheel to activate NSCC and the speed will be set to the current vehicle speed . NSCC may decrease the speed to maintain the distance with the vehicle in front . The CRUISE indicator will illuminate on the instrument cluster .
Press the + – button B up/down to accelerate/decelerate to the desired speed . Press the button B to set the speed .
To set the vehicle distance: Press the Vehicle Distance button D on the steering wheel . Each time you press the button, the vehicle distance will change G, indicated by the number of bars that appear on the display A .
To pause/resume NSCC operation: Depress the brake pedal or press the Pause/Resume button + – B . The cruise indicator on the instrument cluster will change .
To turn NSCC OFF: Press the Driving Assist button C . The CRUISE indicator on the instrument cluster will turn OFF .
To adjust the sensitivity of NSCC: Press the mode button E on the Steering Wheel . With the OK button F, select Drive Assistance, then NSCC Response . Then select Fast, Normal or Slow .
Images are for illustrative purposes only and may not reflect actual feature or operation .
Navigation-based Smart Cruise Control (NSCC)†3
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Smart Cruise Control with Overtaking Acceleration Assist Video
Navigation-based Smart Cruise Control - (NSCC) Video
QR CODE
†LEGAL DISCL AIMERS ON BACK INSIDE COVER*IF EQUIPPED20STINGER FEATURES & FUNCTIONS GUIDE
OK
OK
CE
FB
D

ADAS
ADVANCED DRIVER ASSISTANCE SYSTEM (ADAS)

NSCC is a supplemental system and is not a substitute for safe driving . It is the responsibility of the driver to always check the speed and distance to the vehicle ahead
Images are for illustrative purposes only and may not reflect actual feature or operation .
See section 5 in the Owner’s Manual for more information . For more setting information, refer to the Car Infotainment System Quick Reference Guide .
(Distances are approximate and var y depending on vehicle speed)
(Displays on LCD screen)
172ft130ft
82ft
106ft
Navigation-based Smart Cruise Control (NSCC)†3 (Continued)
REMINDERS:
•
CRUISE indicator must be ON in order to operate SCC
•The speed set ting will need to be reset when ignition is cycled
•
The distance set tings are approximations and may var y depending on vehicle speed . See the owner ’s manual for more information
•
SCC is also canceled when the driver ’s door is opened, gear shift is changed out of D (Drive), Electronic Parking Brake (EPB) is activated and various other conditions . See owner ’s manual for other conditions
•
If SCC is left on, it can be activated inadver tently . Keep the system off when not in use to avoid set ting a speed which the driver is not aware of
•The navigation par t of NSCC does not function when a destination is not set on the infotainment navigation system .
•NSCC requires an active navigation subscription
•NSCC is only available on controlled access roads and highways
ALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS . †LEGAL DISCL AIMERS ON BACK INSIDE COVER*IF EQUIPPED21
G
•If your vehicle speed is bet ween 0-20 mph when you press the Driving Assist but ton to turn NSCC on, the set speed will be set to 20 mph
•When following a vehicle, the system can automatically adjust your cruise speed based on the vehicle detected in front . It will even bring the vehicle to a complete stop if necessar y . If the vehicle remains at a standstill for more than 3 seconds, you must depress the accelerator pedal or press the +/- switch up/down to star t the vehicle
•NSCC is designed to function above approximately 20 mph only
•NSCC will not activate until the brake pedal has been depressed at least once after ignition ON or engine star t
QUICK TIPS
0 KMH
020 4060
202 m１00 kWh/ １00m96%Lv １66°F
2 72m
CHG
PWR
60 MPH
0 KMH
020 4060
202 m１00 kWh/ １00m96%Lv １66°F
2 72m
CHG
60 MPH
0 KMH
020 4060
202 m１00 kWh/ １00m96%Lv １66°F
2 72m
CHG
PWR
60 MPHCRUISED
DAUTOA

ADAS
ADVANCED DRIVER ASSISTANCE SYSTEM (ADAS)
ALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS . †LEGAL DISCL AIMERS ON BACK INSIDE COVER*IF EQUIPPED23
Rear View Monitor (RVM)†3
Rear View Monitor is a supplemental function that displays the view behind the vehicle through the audio head unit screen while the vehicle is in Reverse .
Rear View Monitor activates when the:
•Engine Start/Stop button is in the ON position
•Gear Shift Lever is in the R (Reverse) position
REMINDERS:
•
Through normal use and after inclement weather or washing, the rear camera may become dir t y . Use a clean, microfiber cloth to remove any dir t, debris or spots that may have accumulated on the lens
•
RVM is not a substitute for proper and safe backing-up procedures
•
RVM may not display ever y object behind the vehicle
•
Always drive carefully and use caution when backing up
P
R
N
D
AUTO
HOLD
DRIVE MODEOFF
Rear View Monitor is not a substitute for proper and safe backing-up procedures . Rear View Monitor may not display every object behind the vehicle . Always drive safely and use caution when backing up .
Images are for illustrative purposes only and may not reflect actual feature or operation .
See section 4 in the Owner’s Manual for more information .
Surround View Monitoring is only a supplemental system . Drivers should not rely solely on the SVM information when parking and backing up . Drivers should always pay attention and directly check the left/right and rear .
P
R
N
D
AUTO
HOLD
DRIVE MODE
OFF
OFF
P
P
Images are for illustrative purposes only and may not reflect actual feature or operation .
See section 4 in the Owner’s Manual for more information .
(But ton located below gear shift)
Surround View Monitor (SVM)*†3
Surround View Monitor is a parking support system that shows the areas around the front, rear, left and right sides of the vehicle via four cameras displayed onto the infotainment system screen .
•
Press the Parking/ View button A to turn on Surround View Monitor . Press the button again to turn off the function
•
Other view modes can be selected by touching the view icons B on the Surround View Monitor screen
•Surround View Monitor Auto On: To this feature on, go to Driver
Assistance in the Vehicle Settings > Parking Safety > Surround View Monitor Auto On . When turned on, vehicle is in D (Drive) and the Parking Distance Warning sounds, the front parking assist view is displayed
To change the SVM settings, press the onscreen settings icon C, while SVM is operating .
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Surround View Monitor (SVM) Video
QR CODE
A
B
C
REMINDERS:
•
The SVM camera is equipped with an optical lens to provide a wider range of vision and may appear different from the actual distance
•
Through normal use and after washing or inclement weather, the rear camera may need cleaning . Use a clean, microfiber cloth to remove any dir t, debris or spots that may have accumulated on the lens
•The Front View of SVM will turn off when the gear shift is moved into Park or Reverse or the Parking/ View but ton is pressed .
QUICK TIP

ADAS
ADVANCED DRIVER ASSISTANCE SYSTEM (ADAS)
†LEGAL DISCL AIMERS ON BACK INSIDE COVER*IF EQUIPPED26STINGER FEATURES & FUNCTIONS GUIDE
Head-Up Display is a supplemental system . Do not rely solely on the system, always drive safely, and pay attention to the driving conditions on the road .
Images are for illustrative purposes only and may not reflect actual feature or operation .
See section 4 in the Owner’s Manual for more information .
Head-Up Display (HUD)*†8
The Head-Up Display (HUD) is a semi-transparent display that projects a snippet of information from the instrument cluster and navigation system* onto the windshield glass .
To turn HUD ON or OFF, go to User Settings in the LCD Modes .
The HUD displays:
•Turn By Turn (TBT) navigation information
•Road signs
•
Speedometer
•
SCC vehicle distance information
•
Lane Safety
•
Blind-spot Safety information
•Warning lights (low fuel)
•
AC mode information
•Lane Following Assist information
•Highway Driving Assist information (if equipped)
•Highway Auto Speed Change information*
Head-Up Display (HUD) Settings
Drivers can adjust the HUD settings from the LCD Instrument Cluster modes in User Settings . HUD settings include:
•Enable Head-Up Display
•Display Height: Adjust the height of the HUD image on the windshield glass
•
Rotation: Adjust the degree of HUD rotation
•
Brightness: Adjust the intensity of the HUD brightness
•
Contents Select: Activate or deactivate HUD content (TBT*, BCA , LK A , SCC)
•
Speedometer Size: Choose the size of the HUD speedometer (Small, Medium, Large)
•Speedometer Color*: Choose the color of the HUD speedometer (White, Amber, Green*)
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Head-Up Display (HUD) Video
QR CODE
REMINDERS:
•
The HUD image on the windshield glass may not be visible when:
–
The driver has poor sit ting posture
–The driver is wearing polarized sunglasses
–There is an object covering the HUD
–Driving on a wet road
–Excessive lighting inside or outside the vehicle
•
Modifications made to the windshield, such as tinting or other aftermarket treatments, could affect the HUD . When replacing the front windshield glass of vehicles equipped with the HUD, owners must replace it with windshield glass designed for HUD operation . Other wise, duplicated images may be displayed on the windshield glass
•
If Turn By Turn (TBT) navigation information is selected as HUD content, TBT information will not be displayed on the LCD

INFOTAINMENT SYSTEM
Kia Connect Activation*†1
Follow these steps to activate your Kia Connect system:
1 . Enter the activation screen on your vehicle’s head unit:
a . Press SETUP key
b . Press Kia Connect icon
c . Press Activate Kia Connect
2 . Read and agree to Terms of Service and Privacy Policy and press SUBMIT
3 . Enter number or email address to receive a verification code, then press SUBMIT
4 . Follow these steps to receive your verification code using your phone text message or email:
a . Check your text message or email for verification code
b . Open the link in your text message or email . A page will open requesting that you create your account

Note: If you already have a Kia Owner ’s Portal account using the email or phone number as your login ID, you will need to provide your password prior to receiving the verification code
c . Enter your first name, last name, email, phone number, and account password, and click CREATE ACCOUNT . A page will open displaying your verification code
d . Enter the code in the head unit and press ACTIVATE
e . Go back to the page with your verification code and press “I have entered my verification code .” A link will be provided to download the Kia Access app from your app store . After installing the app, log in and enjoy
REMINDER: This vehicle is not equipped with over-the-air system updates .
Kia Connect Assistance*†1
Kia Connect Voice Local Search A – Press to connect to the search function to find points of interest or other locations, like “cafe”
Roadside Assist B – Press to connect to a Roadside Assistant where you can request vehicle towing services
For more information, refer to the Car Infotainment System Quick Reference Guide .
Driving while distracted can result in a loss of vehicle control that may lead to an accident, severe bodily injury, and death . The driver’s primary responsibility is in the safe and legal operation of a vehicle, and any handheld devices, other equipment, or vehicle systems which take the driver’s eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during operation of the vehicle .
Kia Connect may be unavailable for model year 2022 and later vehicles sold or purchased in Massachusetts . See Kia Connect Terms of Service at owners .kia .com for more information .
(But tons located on the overhead room lamp console area)
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Kia Connect Activation Video
Kia Access App Video
Kia Connect Assistance Video
QR CODES
†LEGAL DISCL AIMERS ON BACK INSIDE COVER*IF EQUIPPED40STINGER FEATURES & FUNCTIONS GUIDE
INFOTAINMENT
SYSTEM
BA

INFOTAINMENT SYSTEM
Kia Connect†1 with Navigation†9 — FM/AM/SiriusXM®†1 6/Media (Multimedia
USB, Bluetooth® Audio)
Your vehicle’s audio system may differ from that in the illustration .
Kia Connect may be unavailable for model year 2022 and later vehicles sold or purchased in Massachusetts . See Kia Connect Terms of Service at owners .kia .com for more information .
For further Kia Connect with Navigation operations, refer to the Car Infotainment System Quick Reference Guide . For other audio system information, see pages 36-41 .
Sound Settings – To adjust the sound settings, press the SETUP key on the audio head unit . Select the on-screen SOUND button, then select the menu item (Position, Volume Levels, Tone, Priority, Navigation, Advanced, Default) .Use the onscreen buttons to adjust settings .
Radio Presets – To save a preset, press and hold the desired slot or star button H
5IJT
TBWFT
UIF
DVSSFOU
TUBUJPO
JO
UIF
TFMFDUFE
TMPU

SiriusXM Smart Favorites - In Radio mode, choose SiriusXM, then select any of the first ten favorites . During song or program play, tap the Skip Backward icon to start from the beginning of the song or program . Tap the Play Live icon to return to the live broadcast .
Custom Key H: To program the Custom Key, press and hold the Custom Key button H
4FMFDU
POF
PG
UIF
BWBJMBCMF
GFBUVSFT
ZPV
XPVME
MJLF
UIF
$VTUPN
,FZ
UP
PQFO

MAP N AV RADIO
MEDIA SETUP
Press to select FM/AM/SiriusXM® modes Press to Power ON/OFF . Rotate to adjust VolumePress to go to Custom (Set) Menu
Press to display the MAP screen for the current position modePress to display the NAV screen to set destination and route Press to display SETUP/Settings mode
Press to select MEDIA mode
Rotate to change Radio/SiriusXM® Station/Media tracks/files
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Kia Connect with Navigation Video
QR CODE
†LEGAL DISCL AIMERS ON BACK INSIDE COVER*IF EQUIPPED42STINGER FEATURES & FUNCTIONS GUIDE
INFOTAINMENT
SYSTEM
•Volume level bet ween different audio modes:
-When switching bet ween audio modes (AM, FM, Bluetooth® Audio, etc .), the audio system saves the previous volume level you were listening to . For example, if you were listening to FM radio at volume level 20 then switched to Bluetooth® Audio and adjusted the volume level to 30, the volume level will be at 20 when you switch back to FM radio
-When using Bluetooth® Audio, the overall volume is dependent on your device’s volume . If the volume is turned down low on your device it will remain low even if the system volume is turned up
•
When connected to Android Auto™ or Apple CarPlay® on your smar tphone, the smar tphone’s navigation system may also be available
•
This system suppor ts Android Auto™ and Apple CarPlay® (USB connection only)
•
A warning screen may appear periodically to remind users that the navigation system should be operated when the engine is running to prevent bat ter y discharge
•
At any time, you can interrupt Kia Connect Command Feedback by pressing the TALK but ton on the steering wheel
•To keep your map and soft ware up to date, free of charge, visit the of ficial Kia update webpage at ht tps://update .kia .com/ . Note, visiting a dealer for soft ware update may include an additional charge
QUICK TIPS
REMINDERS:
•
To help minimize driver distraction, some audio system functionalities have been modified while the vehicle is in Drive, Reverse or moved out of Park
•
Prolonged use of the audio head unit in ACC mode may drain the vehicle’s bat ter y
Navigation System Updates Video
Navigation System Important Tips Video

CENTER PANEL
CENTER PANEL
ALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS . 45*IF EQUIPPED
Idle, Stop and Go (ISG) System*
The ISG system is designed to reduce fuel consumption by automatically shutting down the engine when the vehicle is at a standstill .
When the ISG system is ON and the vehicle is at a standstill the engine will stop, and the green AUTO STOP indicator A on the instrument cluster will illuminate .
The engine will restart when the brake pedal is released or the shift lever is moved from D (Drive) to the R (Reverse) position or to Manual Shift mode* . When the engine restarts, the green AUTO STOP indicator on the instrument cluster will turn off .
To deactivate the ISG System, press the ISG OFF button B . If you press again, the system will be activated .
For more information on Idle, Stop and Go System, refer to section 5 in the Owner ’s Manual or contact your local dealership .
Images are for illustrative purposes only and may not reflect actual feature or operation .
(Type B instrument cluster shown)
0
1 2
3
4
x1000 rpm5
6
7
8
C HE F
km/h
MPH
2030
40
10 0
10 0
80 130
160
200
230
260
290
60
40
20
10 012 0
1 4 0
1 6 0
1 8 0
50
80
60
1 0
0
EPB
AUTO
P
R
N
D
AUTO
HOLD
DRIVE MODE
OFF
OFF
P
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Idle, Stop and Go Video
Launch Control Video
QR CODES
ABC
D
• The ISG system is disabled when:
–A seat belt is unfastened
–The hood or a door is opened
–Bat ter y condition is poor
–
The front or rear defroster is turned on
–
Engine coolant temperature is low
–
The outside ambient temperature is too low/high
–
Emission control devices activate
–
The vehicle is on a steep slope
QUICK TIPSREMINDERS:
•
ISG is active by default at vehicle star t-up . When ignition is cycled, ISG will turn ON again
•
Under cer tain conditions, the engine will restar t automatically even if the brake pedal is still depressed
•
If the AUTO STOP indicator is continuously blinking yellow and the ISG but ton LED is on, please contact an authorized Kia dealer
Refer to section 5 in the Owner’s Manual for more information .
Launch Control aids in controlling acceleration to help the vehicle accelerate smoothly and quickly, while avoiding slipping of the drive wheels and other engine, clutch and gearbox issues .
To turn on, press and hold the ESC OFF button C for more than three seconds while DRIVE MODE D is in SPORT Mode .
To activate, with the left foot press brake firmly while gear shift is in D (Drive) and then press the accelerator pedal fully to the floor . The LCD will display a ready status .
Launch Control*
REMINDERS:
•
When launching, stop vehicle and keep steering wheel straight
•
Brake pedal, EPB and Auto Hold must be released for smooth launching
•
Always drive safely and use caution