Camera LAMBORGHINI GALLARDO 2009 User Guide

Page 1623 of 1659

3
L714 79 74 05
Fig.7
S
T
U
)LJ
:
9
)LJ
43
2
5
1
5
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
Disconnect the original multimedia harness of the car from the kit to the connections on rear bench:
5.
1.If the car is equipped with the Bluetooth system, disconnect the black connector (1)LJ ) from the Bluetooth
ECU.
2.Remove the little loop (2)LJ )RIWKHRULJLQDOPXOWLPHGLDKDUQHVVWKDWLV¿[HG XVLQJWKHSURSHUVFUHZ LQWKH
bushing(2)LJ ) that is present on the rear bench in front of the ECU with the white cap (Bosch ECU).
3.Disconnect the black connector (3)LJ ) of the original multimedia harness to the black one of the central
harness (
3)LJ ) that is present on the rear bench on the left of the ECU with the white cap (Bosch ECU).
4.Remove the connector to the CD-Changer or to the USB interface (4)LJ ).
5.If the vehicle is equipped with the rear view camera, remove the yellow connector (5)LJ ) of the original
multimedia harness from the rear view camera’s ECU.
The connections that are described in the operations 1 and 5 are the all link that could be present on the
car; all these connections are present only if the car is equipped with all the possible multimedia optional. It’s
necessary disconnect only the link that are present; if something that is described here is missing , it’s only
because the proper optional is not present on the car.
Remove the black connector

( 5)LJ ) of the car’s wiring harness that is connected to the RVC control unit.
Removing the multimedia elements that are not compatible with the Kenwood system.
On the rear bench, remove the USB interface
7.( 6)LJ ) or the CD-Changer, if the car is equipped with it.
5HPRYHWKHEUDFNHWWKDW¿[HGWKH86%LQWHUIDFHRUWKH&'&KDQJHUWRFDUU\RXWWKLVRSHUDWLRQLWLVQHFHVVDU\

to remove the three screws
(7)LJ WKDW¿[WKHEUDFNHWWRWKHEHQFK
5HPRYH WKH EUDFNHW WKDW ¿[ WKH %OXHWRRWK FRQWURO XQLW
9.( 8)LJ ) on the rear bench; to do this it’s necessay to
disassemble the two screw on the rear bench and release the joint present in the front part of the bracket. Remove the Bluetooth control unit
10.( 8)LJ ) from the rear bench.
Installation of the new multimedia harness (infotainment harness) on the car.
Lay the new multimedia harness
11.( 9)LJ VXSSOLHGZLWKWKHNLWRQWKHGULYHUVLGHRIWKHFHQWUDOWXQQHODQG¿[LW
XVLQJWKHEXVKLQWKHFKDVVLVDQGWKH¿[LQJFOLSV (:)LJ ) that are present in the new harness. The new harness
has to be positioned so that the the black/yellow jack (video connection) will be placed behind the multimedia system, while the other connections have to be placed on the rear bench.

Page 1624 of 1659

4
L714 79 74 05
Fig.9
12
3
5
Fig.10
Z
4
Fig.11
A
B
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
The following connections have to be carry out on the rear bench:
12.
1.Put to ground the little loop (1)LJ )SUHVHQWRQDZLUHRIWKHQHZPXOWLPHGLDKDUQHVV¿[LWXVLQJWKHSURSHU
screw that have to be insert in the
bushing(1)LJ ) that is present on the rear bench in front of the ECU with
the white cap (Bosch ECU).
2. Link the black connector (2)LJ ) of the new multimedia harness to the black connector of the central
harness (
2)LJ ) that is present on the rear bench on the left of the ECU with the white cap (Bosch ECU).
6SHFL¿FRSHUDWLRQVIRUFDUHTXLSSHGZLWKUHDUYLHZFDPHUD
.
1. The following connections have to be carry out on the rear bench:
3.Connect the brown connector (3)LJ ) of the new multimedia harness to the rear view camera’s
control unit ( =)LJ).
4.Insert the black male connector of the new infotainment harness in the proper connection (4)LJ)
of the rear view camera’s control unit ( =)LJ).
5.Connect the black female connector (5)LJ) of the new multimedia wiring harness to the black
male connector (
5)LJ ) of the car wiring harness that was previously inserted in the rear view
camera’s control unit (removed with the operation 6
( 5)LJ )).
2. Connect the yellow/black video connector ( A)LJ 11) to the Kenwood multimedia system ( B)LJ 11); this
connector has to be connected to the yellow connector ( B)LJ 11) that has the label “rear view camera”
on its own cable.
 2QWKHFDUHTXLSSHGZLWKWKHUHDUYLHZFDPHUDWKHEXWWRQRQWKHFHQWUDOWXQQHOFRQVROHWKDWLV XVHGIRUWKHPDQXDODFWLYDWLRQRIWKHFDPHUDZLOOEHQRORQJHUXVHIXOWKHPDQXDODFWLYDWLRQRI
WKHFDPHUDZLOOEHQRORQJHUSRVVLEOHEXWWKHFDPHUDZLOODXWRPDWLFDOO\VWDUWZKHQWKHUHYHUVH gear will be engaged.

Page 1628 of 1659


L714 79 74 05
I
3
2
4
II
1
IIIVIII
IX
5
IV
V
VIVIIX
Fig.21
7
9

10
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
The table down here show all the connections that have to be carry out behind the Kenwood multimedia system. 32.
Each line is equivalent to a connection that have to be done between the two connector that are shown on the
line itself. All the involved connectors are shown in the picture beside
(Fig.21 WKH\DUHLGHQWL¿HGE\DQXPEHU
FODVVLFRUURPDQ DQGE\DFRORUWKHWZRFRQQHFWRUVLGHQWL¿HGE\WKHVDPHQXPEHUDQGWKHVDPHFRORUKDYH
to be connected together.
The white connector (I Fig.21 KDVFRQQHFWLRQSRLQWVZLWKRQHFDEOHHDFKWKH¿UVWFDEOHKDVDELJGLDPHWHU
while the other one is lesser thick. The green connector (
1Fig.21 ) has to be connect to the connection point
ZKHUHWKHUHLVWKHELJJHVWFDEOHLQWKLVFRQQHFWLRQSRLQWWKHUHDUHWZROLWWOHKRRNVWKDW¿[WKHMRLQLQJEHWZHHQ
the two connectors.
If the car is equipped with rear view camera: behind the new Kenwood multimedia system, verify that there
is the connection between the video jack of the rear view camera (multimedia harness) and the connection of the Kenwood system; this connection had to be carried out with the operation 2 at page 4 (B )LJ 11).
N° Descri pti on N° Descri pti on
1Radio antenna connector - antenna side >IRadio antenna wiring harness connector
2CAN line connector - car side>IIRNS-E main connector
N° Descri zi one
3Radio antenna connector - system side>IIIRadio antenna connection
4CAN line connector - system side>IVMain Kenwood connection
N° Descri pti on
5GPS antenna connector>VGPS antenna connection
iPod video jack (yellow)>VIiPod video connection (yellow)
7iPod audio jack (black)
>VIIiPod audio connection (black)
iPod USB connector>VIIIUSB connection iPod (see the label on the cable)
9USB connector>IXUSB connection
10Microphone jack (Bluetooth system) >XMicrophone plug (Bluetooth system)
Inte rfa ce w iring ha rne ss
.H QZ RRGPXOWLPH GLD V\VWH P
Acce ssorie s conne ctions
Ca r's w iring ha rne ss

Page:   < prev 1-10 11-20