ECU LAMBORGHINI GALLARDO 2009 Workshop Manual

Page 1206 of 1659

7
L714 08 82 03
)LJ
A
)LJ
C
%
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
' &XVKLRQVLGHV 3UHOLPLQDU\RSHUDWLRQV • Remove the seat from the passenger compartment.
• Remove the power seat control panel, if present.
• Remove the seat cushion padding.
'LVDVVHPEOLQJWKHVLGHV 1. Remove the triangular guard on the seatbelt buckle side by unscrewing the screws ( $)LJ) that attach it to the
seat.
2. Disassemble the seatback from the seat by unscrewing the bolts ( %)LJ) that secure it to the cushion frame.
Important!
After the seatback is disassembled, it will remain connected to the rest of the seat through the wiring harness.
Be careful not to damage it during these operations.

Page 1208 of 1659

9
L714 08 82 03
)LJ)LJ
C
A
%
'
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
( /XPEDUVXSSRUWFRQWUROGHYLFH 3UHOLPLQDU\RSHUDWLRQV • Remove the seat from the passenger compartment 3XQWR1 .
• Remove the seatback cover 3XQWR+ .
• Remove the side airbag (088003).
• Remove the headrest 3XQWR$ .
• Remove the seatback padding 3XQWR% .
'LVDVVHPEOLQJWKHFRQWUROGHYLFH1. Detach the connector ( $)LJ) of the lumbar support control device’s motor ( %)LJ).
2. Pull the deformable part ( &)LJ) of the lumbar support control device toward the seatbelt buckle side to
unhook its fasteners ( )LJ) from the frame and remove it:
If necessary, use a screwdriver as a lever.
3. Remove the two rivets ( ')LJ) that secure the lumbar support control device’s motor to the frame and
remove the motor using a drill with a 4 - 4.5 mm bit.

Page 1209 of 1659

10
L714 08 82 03
)LJ
A
)LJ )LJ
%
(
C'
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
) 6HDWFRQWUROV 3UHOLPLQDU\RSHUDWLRQV • Remove the seat from the passenger compartment 3XQWR1 .
'LVDVVHPEOLQJWKHFRQWUROV 1. Remove the triangular guard on the outer side of the seat by loosening the screws ( $)LJ) that secure it to
the seat.
2. Remove the screws ( %)LJ) that secure the seat controls to the frame.
3. Unhook the seat control panel by pushing it upward to detach it from the clamps ( ()LJ).
4. Detach the control unit by unscrewing the 3 screws ( &)LJ).
5. Disconnect the wiring harness ( ')LJ).

Page 1210 of 1659

11
L714 08 82 03
)LJ
A
%
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
* 6HDWKHLJKWDGMXVWPHQWGHYLFH 3UHOLPLQDU\RSHUDWLRQV • Remove the seat from the passenger compartment.
'LVDVVHPEOLQJWKHDGMXVWPHQWGHYLFH 1. Set the seat on the seatback.
2. Detach the connector of the seat height adjustment motor ( $)LJ).
3. To facilitate the disassembly operations, manually place the seat at maximum height, activating the adjustment
motor with an external battery.
4. Disconnect the motor by unscrewing the 3 bolts ( %)LJ) that secure it to the frame.

Page 1211 of 1659

12
L714 08 82 03
)LJ )LJ
A
%
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
+ 6HDWEDFNSDQHO 3UHOLPLQDU\RSHUDWLRQV • Remove the seat from the passenger compartment.
'LVDVVHPEOLQJWKHVHDWEDFNSDQHO 1. Lightly force the seatback’s cover off, if necessary using a plastic tool as a lever and remove the 5 fasteners
($)LJ ) that secure the cover to the seat’s frame.
2. Unhook the cover’s lower fastener ( %)LJ), which secures it to the seat’s frame, and remove the cover.

Page 1212 of 1659

13
L714 08 82 03
)LJ
)LJ )LJ
A
C
%
'
(
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
, 6HDWEDFNLQFOLQDWLRQFRQWUROGHYLFH 3UHOLPLQDU\RSHUDWLRQV • Remove the seat from the passenger compartment 3XQWR1 .
• Remove the seatback cover 3XQWR+ .
• Remove the side airbag (088003).
• Remove the headrest 3XQWR$ .
• Remove the seatback padding 3XQWR% .
'LVDVVHPEOLQJWKHFRQWUROGHYLFH1. Remove the connector ( $)LJ) of the seatback inclination control motor ( %)LJ).
2. Remove the screw ( &)LJ) that secures the motor to the seatback frame using a 7[WRUTXHZUHQFK
3. Remove the clip (airbag side) ( ')LJ) and extract the motion bar ( ()LJ) from the other side; the motor
remains inside.
4. Remove the motor.

Page 1214 of 1659

15
L714 08 82 03
)LJ
)
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
For the driver’s side seat: 6. Completely remove the seat cushion.
7. Unhook the staples under the seat cushion that secure the covering to the padding.
8. Remove the padding starting from the back and proceeding toward the front (Fig.24).
1RWH
The covering is attached to the padding with Velcro (F-Fig.24). The part of the Velcro attached to the
padding (with glue or staples) can easily become detached.
Remove the covering slowly while holding the Velcro part attached to the padding in place.

Page 1215 of 1659

16
L714 08 82 03
)LJ
(
C
'
)
%
A
)LJ
GH
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
0 6HDWUHFOLQHUGHYLFH 3UHOLPLQDU\RSHUDWLRQV • Remove the seat from the passenger compartment 3XQWR1 .
Remove the seatback cover 3XQWR+ .
• Remove the side airbag (088003).
• Remove the headrest 3XQWR$ .
• Remove the seatback padding 3XQWR% .
• Remove the deformable part of the lumbar support control device 3XQWR( .
• Remove the seatback inclination control motor 3XQWR, .
'LVDVVHPEOLQJWKHVHDWFXVKLRQSDGGLQJ 1. Pull the handle to tilt the seatback ( $)LJ) in order to access the locking device ( %)LJ).
2. Slightly loosen the tension of the tightening cables ( &)LJ) and unhook the eyes ( ')LJ) from the anchoring
pins ( ()LJ ).
Important!
The anchoring pins are equipped with a snap ring ( ))LJ) that holds the cable in place when it is tightened.
The cable unhooks without extracting the snap ring from the anchoring pin by removing the cable’s eye from
the pin at the point in which the eye’s shape is wider.
3. Cut the clamps that secure the sheaths of the frame attachment cables (center of seatback) and free the upper
part ( *)LJ ) and lower part ( +)LJ) of the sheath from the frame, by detaching the snap-in fasteners.

Page 1216 of 1659

17
L714 08 82 03
)LJ
)LJ )LJ
I
L
M
3
O
1
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
4. Remove the pin ( ,)LJ) that secures the handle unit to the frame.
5. Pulling the cables, free the handle unit ( )LJ) from its housing and remove the bracket ( /)LJ) that locks
the cable in place from the handle ( 0)LJ), if necessary using a screwdriver as a lever.
6. Free the cable from the bracket ( /)LJ), widening the tabs with a screwdriver.
7. Free the tightening cables on the handle side from the frame by unscrewing the 2.5 mm Allen screw ( 1)LJ)
on each side and disassembling the plate ( 2)LJ DQG7HÀRQSXOOH\ 3)LJ). Then extract the cable from
the seatback’s frame.

Page 1217 of 1659

18
L714 08 82 03
)LJ )LJ
A
%
C
(
'
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
1 'LVDVVHPEOLQJWKHVHDW 1. Unscrew the screws ( $)LJ) securing the 2 seat rails ( %)LJ) to the bottom of the car (2 screws per rail).
2. Disconnect the 3 wiring harnesses under the seat:
• red harness ( &)LJ)
• yellow harness ( ')LJ)
• black harness ( ()LJ)
3. Detach the fastener that secures the black wiring harness to the seat.
4. Remove the seat.

Page:   < prev 1-10 ... 311-320 321-330 331-340 341-350 351-360 361-370 371-380 381-390 391-400 ... 470 next >