air condition LAMBORGHINI GALLARDO 2009 Repair Manual

Page 1004 of 1659

3
L714 08 16 03
)LJ
A%
'
)LJ
CCCCCC
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
% $LUFRQGLWLRQHUFRQWUROXQLW 3UHOLPLQDU\RSHUDWLRQV •Remove the tunnel ornament (086303).
• Disassemble the BJA push-button panel unit (086803).
• Disassemble the air conditioner grille.
'LVDVVHPEOLQJWKHDLUFRQGLWLRQHUFRQWUROXQLW 1. Unscrew the 2 screws ( $)LJ) securing the air conditioner ornament at the bottom ( %)LJ).
2. Detach the 6 connections from the respective ports ( &)LJ) on the back of the ornament.
2. Remove the air conditioner control unit ( ')LJ).

Page 1005 of 1659

1
L714 08 16 05
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
7KHSUHVHQWVHFWLRQFRQWDLQVWKHIROORZLQJDVVHPEO\VHTXHQFHV
A) Air conditioner grille
%  $LUFRQGLWLRQHUFRQWUROXQLW

Page 1006 of 1659

2
L714 08 16 05
)LJ
)LJ
%
A
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
A) Air conditioner grille 1.
Position the air conditioner grille ( $)LJ) so that the 4 clips ( %)LJ) enter the corresponding couplings.
• Assemble the BJA push-button panel unit (086805).
• Assemble the tunnel ornament (086305).

Page 1007 of 1659

3
L714 08 16 05
)LJ
'C
%
)LJ
AAAAAA
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
% $LUFRQGLWLRQHUFRQWUROXQLW 1. Attach the 6 connections to the respective ports ( $)LJ) on the back of the control unit.
2. Secure the air conditioner control unit ( %)LJ) at the bottom ( &)LJ) using the screws ( ')LJ).
• Assemble the air conditioner grille.
• Assemble the BJA push-button panel unit (086805).
• Assemble the tunnel ornament (086305).
• &RQQHFWWKH/D5D$6V\VWHPDQGSURJUDPWKHDLUFRQGLWLRQHUXVLQJWKHFRUUHFWFDU¿OH (109000).

Page 1157 of 1659

18
L714 08 68 05
)LJ
A
)
)LJ
)LJ
C
%
® Automobili Lamborghini S.p.A.
7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
S) Assembling the dashboard
1.
Position the dashboard ( $)LJ) connecting the various connections.
2. Tighten the 2 screws ( %)LJ) at the center securing the dashboard to the air conditioner.
3. Secure the passenger side airbag to the dashboard using the 4 screws ( &)LJ).

Page 1158 of 1659


L714 08 68 05
)LJ
(
)LJ
GG
'
)LJ
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
4. Tighten the dashboard’s center screw ( ')LJ).
5. Tighten the 4 screws ( ()LJ) securing the 2 side air vents to the dashboard (2 screws per vent).
6. Tighten the 2 screws ( ))LJ) connecting the dashboard to the tunnel and the tunnel cover.
7. Tighten the 2 screws ( *)LJ) through the space created by the instrument cluster.
• Assemble the instrumentation  3RLQW/ 
• Assemble the center dashboard cover 3RLQW, 
• Assemble the driver side lower dashboard assembly  3RLQW4 
• Assemble the passenger side lower dashboard assembly  3RLQW5 
• Assemble the two side covers  3RLQW3 
• Assemble the tunnel ornament   
•  $VVHPEOHWKHFDUKL¿V\VWHP   
• Assemble the air conditioner ornament  
• Assemble the air conditioner grille  
• Assemble the BJA push-button panel 3RLQW2 
• Assemble the instrument cluster  3RLQW1 
• Assemble the instrument cluster grille  3RLQW0 
• Assemble the passenger side seat   
• Connect the LaRa-AS system and reset any error codes  .
 $OZD\VWDNHWKHXWPRVWFDUHQRWWRGDPDJHWKHOHDWKHUXSKROVWHU\GXULQJDVVHPEO\SURFHGXUHV

Page 1177 of 1659

3
L714 08 80 00
Fig.3
A
B
'C
® Automobili Lamborghini S.p.A.
7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
*HQHUDO2YHUYLHZ
7KHDLUEDJLVDVDIHW\GHYLFHFRQVLVWLQJRIDEDJWKDWDXWRPDWLFDOO\LQÀDWHVLQDIURQWDORUVLGHFROOLVLRQSODFLQJLWVHOI
between the driver or passenger’s body and the structures of the vehicle.
This is a “passive safety system” since it comes into action once a certain deceleration value is exceeded (which can
only result from hitting an obstacle) without the occupant acting in any way. The deployment conditions of the airbagare governed by an electronic control unit (SDM) that continuously processes vehicle deceleration. An electric pulse
LV VHQW ZKHQ D SUHGH¿QHG WKUHVKROG LV H[FHHGHG7KLV KHDWV DQ HOHFWULFDO UHVLVWDQFH KRXVHG LQ WKH JDV JHQHUDWRU
ZKLFK LJQLWHV 7KLV FDXVHV D FKHPLFDO ¿ULQJ UHDFWLRQ ZKLFK LQ WXUQ ¿UHV WKH S\URWHFKQLF FKDUJH 7KHS\URWHFKQLF
FKDUJHUHDFWLRQJHQHUDWHVLQHUWJDVZKLFKLV¿OWHUHGDQGFRROHGE\PHWDO¿OWHUVDQGLVWKHQOHWRXWIURPWKHKROHVRQ
WKHJDVJHQHUDWRUFDVLQJFDXVLQJWKHEDJWRLQÀDWH7KHEDJSODFHVLWVHOIEHWZHHQWKHIURQWLQWHUQDOVWUXFWXUHRIWKH
vehicle and the occupant’s head (driver or passenger).
7KHLQÀDWHGEDJLVDVRIWEDUULHUWKDWVORZVGRZQWKHRFFXSDQW¶VKHDGGXULQJWKHFROOLVLRQ7KHEDJLVGHÀDWHGE\WKH
gas that is let out from a hole in the back of the bag by the action of the occupant moving forwards. The system is
deployed in thousandths of a second to anticipate the forward movement of the body during the deceleration caused by the impact.
7KHS\URWHFKQLFFKDUJHLVFRQWDLQHGLQDVHDOHGFRQWDLQHULQWKHJDVJHQHUDWRU,WVRQO\SXUSRVHLVWRLQÀDWHWKHEDJ
,QQRFDVHFDQWKHGHYLFHWUDQVPLWDIRUPRIHQHUJ\ZKLFKFDQ¿UHDQ\RWKHUJDVJHQHUDWRUVVWRUHGLQWKHLPPHGLDWH
proximity.
1RWH
Please note that the gas generator is the only airbag system component containing a pyrotechnic charge.
The SDM is the control unit governing all the airbag system functions. The SDM is the only control unit in the system.
It contains both the accelerometer and the error memory. If the airbag warning light on the dashboard turns on during
normal vehicle operation, it indicates an airbag system malfunction. The malfunction will be stored in the SDM control
unit as soon as the dashboard warning light turns on. The airbag warning light indicates a failure without specifying
its nature. Run the SDM control unit diagnostic procedure to verify the cause of the error. The LARa-AS diagnostic system diagnoses the airbag control unit. To reset the system, see Gallardo Diagnostics.
A. Driver side airbag module
B. Passenger side airbag module
C. Side airbag module
' Airbag control unit (SDM) (under the center console)

Page 1330 of 1659

1
L714 09 56 00
Fig.1
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
(OHFWURQLFFRQWUROXQLW 6'0
The electronic control unit governs and activates the various airbag modules and is secured to the car’s tunnel under the console (Fig.1).
The control unit is connected to:• front airbags (driver side airbag module and passenger side airbag module)
• LH and RH side airbags
• LH and RH seatbelt pretensioners
• LH and RH side impact sensors
On the inside, the control unit has: • an electromechanical sensor which discriminates the “activation/deactivation” conditions according to the
vehicle’s longitudinal deceleration;
• an electromagnetic safety sensor operating with the electromechanical sensor; both sensors must enable the
“activation” condition for the system to be deployed;
The electronic control unit analyzes the signals coming from the internal and external sensors (side impact) and,
based on appropriate strategies (which consider the impact’s force and angle), normally activates: • In the case of frontal impact : the driver side airbag module, the passenger side airbag module and the two
seatbelt pretensioners.
• In the case of side impact : the side airbag and the seatbelt pretensioner on the side of the impact.
The control unit has a self-diagnostic feature that checks the entire system’s operation when the ignition key is turned
to “ON”. During the test a red warning light on the dashboard turns on. The warning light turns off approximately four
seconds after the engine is started if the system is working correctly.

Page 1333 of 1659

2
L714 09 56 03
Fig.3
Fig.4
Fig.5
(
'
F
G
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
4. Remove the two lower socket head screws ( ')LJ) and release the two upper clips ( ()LJ). Extract the air
conditioner control unit.
5. Disconnect the air conditioner control unit connectors ( F-Fig.4).
6. The airbag control unit ( G-Fig.5  UHPDLQV RQ WKH ÀRRU RI WKH FHQWHU FRQVROH ,QVLGH WKH DLU FRQGLWLRQHU FRQWURO
unit compartment, remove the 3 screws that secure the airbag control unit.
7. Move the airbag control unit just enough to disconnect the connectors.
8. Remove the airbag control unit ( G-Fig.5).

Page 1334 of 1659

1
L714 09 56 05
Fig.1
A
B
Fig.2 Fig.3
D
C
E
® Automobili Lamborghini S.p.A.7KHLQIRUPDWLRQDQGSURFHGXUHVSXEOLVKHGEHORZDUHVWULFWO\FRQ¿GHQWLDODQGH[FOXVLYHO\IRUWKH/DPERUJKLQL'HDOHU1HWZRUNDQG$XWKRUL]HG6HUYLFH3RLQWV$OOFRS\ULJKWVDUHSURSHUW\RI$XWRPRELOL
/DPERUJKLQL6S$EDVHGRQFRS\ULJKWODZ$OORIWKH3')FKDSWHUVLQWKH:(%ZRUNVKRSPDQXDOVGHVFULEHGEHORZDUHEDVHGRQLQIRUPDWLRQDYDLODEOHDWWKHWLPHRISXEOLFDWLRQ7KHFRPSDQ\UHVHUYHV
WKH ULJKW WR PDNH XSGDWHV DQG PRGL¿FDWLRQV 7KH IROORZLQJ DUH SURKLELWHG UHSULQWLQJ UHSURGXFWLRQIRUZDUGLQJ WR XQDXWKRUL]HG SHRSOH DQGRU WKLUG SDUWLHV DQG WUDQVODWLRQ LQFOXGLQJ SDUWLDO ZLWKRXW
ZULWWHQDXWKRUL]DWLRQIURP$XWRPRELOL/DPERUJKLQL6S$
Assembling the SDM control unit
 0DNH VXUH WKDW WKH FRQWURO XQLW GRHV QRW SUHVHQW VLJQV RI ZHDU VFUDWFKHV RU RLO &KHFN WKDW QRIRUHLJQERGLHVDUHVWXFNXQGHUQHDWKWKHFRQWUROXQLW
1. Insert the airbag control unit into the center console, checking that the car’s travel direction coincides with the
arrow on the control unit.
2. Connect the two connectors; the yellow-orange Siemens connector with the same one on the wiring harness,
properly rotating the tab to lock it in place.
3. Properly position the control unit, checking that the wiring harness is not squeezed between the control unit and
its support.
4. Secure the control unit using the 3 retaining screws.
5. Connect the connectors to the air conditioner control unit.
6. Insert the air conditioner control unit into the center console’s housing, hooking it at the top onto the two clips
(A-Fig.1 ). Secure the air conditioner control unit at the bottom using the two socket head screws ( B-Fig.1).
7. Snap the center console’s bezel in place.
8. Connect the connectors ( C-Fig.2) of the light push-button panel (BJA) ( D-Fig.2) and then insert it into the center
console’s housing.
9. Connect the connectors of the buttons of the tunnel control panel ( E-Fig3) and then insert the panel.
• Reconnect the battery cables and then carry out the following operations:
• Resynchronization of remote controls
• Resynchronization of steering angle
• Resynchronization of power window zero position
• Use the LaRa system to program the air conditioner control unit (109000).

Page:   < prev 1-10 ... 21-30 31-40 41-50 51-60 61-70 71-80 next >