CD player Lancia Ypsilon 2014 Owner handbook (in English)

AUX OFFSET function
(alignment of the portable device volume with
that of the other sources)
(for versions/markets, where provided)
This function enables the alignment of the volume
of the AUX source, depending on its own portable
player, with that of the other sources.
To activate the function, press the MENU button
and select “AUX offset”.
Press the buttons
or
to decrease or increase
the volume value (set from–6to+6).RADIO OFF function
(on and off mode)
This function is used to set the radio turning off
mode to one of two different settings. To turn the
function on, use the
or
buttons.
The chosen mode appears on the display:
❒"00 MIN": the radio turns off automatically in
connection with the ignition key; the radio turns
off automatically as soon as the key is turned to
the STOP position;
❒"20 MIN": the radio turns off independently of
the ignition key; the radio remains switched on
for a maximum period of 20 minutes after the
key has been turned to the STOP position.
289
SOUND-SYSTEM

Car radio passport
This document certifies ownership of the radio.
The car radio passport shows the radio model,
serial number and secret code.
NoteKeep this car radio passport in a safe place
so that you can give the information to the
relevant authorities if the car radio is stolen.
In case of loss of the car radio passport, contact
the Lancia Dealership, taking an ID document and
the car ownership documents.
RADIO (TUNER)INTRODUCTION
When the radio is switched on, the last function
selected before it was switched off is activated:
Radio, CD, CD MP3 or Media Player (only with
Blue&Me™) or AUX (only withBlue&Me™, for
versions/markets, where provided).
To select the Radio function when another audio
source is being listened to, briefly press the FM AS
or AM buttons depending on the desired band.
Once the Radio mode has been activated, the
display will show the name (RDS stations only)
and the frequency of the selected radio station, the
frequency band selected (e.g. FM1) and the
preselect button number (e.g. P1).
292
SOUND-SYSTEM

CD PLAYERINTRODUCTION
This chapter describes the variants regarding the
operation of the CD player: as far as the operation
of the radio is concerned, refer to the description
in the "Functions and Adjustments" chapter.
SELECTING THE CD PLAYER
To activate the CD player built-into the
equipment, proceed as follows:
❒load a CD with the equipment switched on: the
first track will start to play;
or
❒if a CD has already been loaded, turn on the car
radio and then briefly press the CD button to
select the “CD” operating mode: the last track
listened to will start to play.
It is advisable to use original CDs to ensure
optimum playback. If CD-R/RWs are used, we
recommend using good quality media that are
burnt at the slowest speed possible.LOADING/EJECTING A CD
To load the CD, insert it gently into the slot to
activate the motorised loading system, which will
position it correctly.
The CD can be loaded with radio off and the
ignition key turned to MAR-ON: in this case the
radio will remain off. When the radio is turned on,
the last source listened to before being switched off
will be activated.
When a CD is inserted the display will show the
symbol "CD-IN" and the text "CD Reading". They
will remain displayed for the entire time required
for the radio to read the CD tracks. When this
time has elapsed the radio automatically starts
playing the first track.
Press the
button (EJECT) with the radio on to
activate the motorised ejection of the CD. After
ejection, the last audio source listened to before
playing the CD will be heard.
If the CD is not removed from the radio, it will
automatically be reloaded about 20 seconds later
and the Tuner mode will be tuned into (Radio).
The CD cannot be ejected if the car radio is off.
If the ejected CD is reloaded without having
removed it completely from the slot, the radio will
not switch to the CD source.
296
SOUND-SYSTEM

Possible error messages
If the CD loaded cannot be read (e.g. a CD ROM
has been inserted or the CD is inserted the wrong
way round or there is reading error) the display
will show the wording "CD Disc error".
The CD will then be ejected and the audio source
activated prior to the CD mode selection will be
heard.
With an external audio source activated (TA,
ALARM or Phone), the CD that cannot be read
will be not be ejected until these functions have
ended. At the end, with the CD mode activated,
the display will show the text "CD Disc error" for
a few seconds and then the CD will be ejected.
If the CD player overheats the CD playing could
be temporarily interrupted. The radio will
automatically turn to the Radio (Tuner) mode and
the display will show “CD hot” and then “CD disc
error”.DISPLAY INFORMATION
When the CD player is in operation, information
appears on the display with the following
meanings:
❒"CD Track 5": indicates the number of the CD
track;
❒"03.42": indicates the time elapsed since the
start of the track (if the relevant Menu function
is activated).
TRACK SELECTION (forward/back)
Briefly press the
button to play the previous CD
track and the
button to play the next track.
The tracks are selected cyclically: the first track is
selected after the last track and vice versa.
If the track has been played for more than 3
seconds, pressing the
button will cause the track
to be started again from the beginning.
In this case, if you want to play the previous track,
press the button twice consecutively.
297
SOUND-SYSTEM

TRACK FAST FORWARD/REWIND
Keep the
button pressed down to fast forward
the selected track and keep the
button pressed
down to fast rewind the track.
The fast forward/rewind will stop once the button
is released.
PAUSE FUNCTION
To pause the CD player, press the
button. The
text “CD Pause” appears on the display.
To resume listening to the track, press the
button again. If another audio source is selected,
the pause function is turned off.
CD MP3 PLAYERINTRODUCTION
This chapter only describes the variants regarding
the operation of the CD MP3 player: as far as the
operation of the radio is concerned, refer to the
description in chapters "Radio" and "CD MP3
Player".
NOTE MPEG Layer-3 audio decoding technology
licensed from Fraunhofer IIS and Thomson
multimedia.
MP3 MODE
In addition to playing regular audio CDs, the radio
is also able to play CD-ROMs on which audio files
have been recorded using the MP3 compression
format. The radio functions as described in the
"CD Player" chapter when an ordinary audio CD
is inserted.
To guarantee optimal playback quality it is
advisable to use good quality CDs mastered at the
lowest speed possible.
The files on an MP3 CD are structured in folders
that create lists of all the folders containing MP3
tracks (folders and subfolders are all displayed on
the same level); the folders that do not contain
MP3 tracks cannot be selected.
298
SOUND-SYSTEM

STRUCTURE OF THE FOLDERS
The radio with MP3 player:
❒recognises only the folders that contain MP3
format files;
❒if the MP3 files on a CD-ROM are structured in
"sub-folders", their structure is compressed to a
single level structure where the "sub-folders" are
taken to the level of the main folders.
AUX (only with the Blue&Me™ system)(for versions/markets, where provided)
INTRODUCTION
This chapter describes the variants regarding the
operation of the AUX source: as far as the
operation of the radio is concerned, refer to the
description in the "Functions and Adjustments"
chapter.
AUX MODE
To activate the AUX source, press the MEDIA
button or the SRC control on the steering wheel
several times till the corresponding source is
displayed.
301
SOUND-SYSTEM

IMPORTANT
the functions of the device connected with the
AUX socket are directly managed by the device
itself; it is not possible to change
track/folder/playlist with radio or steering wheel
controls.
Do not leave the cable of your portable player
connected with the AUX socket after the
disconnection, to avoid possible hisses from the
speakers.
NOTE The AUX socket is not incorporated in the
radio. For its position, refer to theBlue&Me™
Supplement and its Quick Guide.
TROUBLESHOOTINGGENERAL
Low volume
The Fader function should be adjusted only to the
values "F" (front) to prevent a reduction in radio
output power and the muting of the volume if the
Fader level adjustment is equal to R+9.
Source cannot be selected
Nothing has been loaded.
Load the CD or CD MP3 to be played.
302
SOUND-SYSTEM

CD PLAYER
The CD does not play
The CD is dirty. Clean the CD.
The CD is scratched. Try using another CD.
The CD cannot be loaded
A CD is already loaded. Press the
button and
remove the CD.MP3 FILE READING
Track skips during MP3 file playback
The CD is scratched or dirty. Clean the CD,
referring to the description in the paragraph “CD”
in the chapter “INTRODUCTION”.
The duration of the MP3 tracks is not shown
correctly
In some cases (due to the recording mode) the
duration of the MP3 tracks may be displayed
incorrectly.
303
SOUND-SYSTEM