Lexus CT200h 2015 Navigation Manual (in English)

360
1. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE-OVERVIEW
CT200h_Navi_OM76146U_(U)14.06.17 09:48
INFORMATION
●
Exposure to radio frequency signals:
The Lexus Enform with Safety Connect
system installed in your vehicle is a low
power radio transmitter and receiver. The
system receives and also sends out radio
frequency (RF) signals.
●In August 1996, the Federal Communi-
cations Commission (FCC) adopted RF
exposure guidelines with safety levels for
mobile wireless phones. Those guidelines
are consistent with the safety standards
previously set by both U.S. and interna-
tional standards bodies.
• ANSI (American National Standards Institute) C95.1 [1992]
• NCRP (National Council on Radiation Protection and Measurement) Report
86 [1986]
• ICNIRP (International Commission on Non-Ionizing Radiation Protection)
[1996]
●Those standards were based on compre-
hensive and periodic evaluations of the
relevant scientific literature. Over 120
scientists, engineers, and physicians from
universities, government health agen-
cies, and industry reviewed the available
body of research to develop the ANSI
Standard (C95.1).
●The design of Lexus Enform with Safety
Connect complies with the FCC guide-
lines in addition to those standards.
INFORMATION
●
Available beginning Fall 2009 on select
Lexus models. Contact with the Lexus
Enform with Safety Connect response
center is dependent upon the telematics
device being in operative condition, cel-
lular connection availability, navigation
map data, and GPS satellite signal recep-
tion, which can limit the ability to reach
the response center or receive support.
Enrollment and Telematics Subscription
Service Agreement required. A variety of
subscription terms is available; charges
vary by subscription term selected.
●The Lexus Enform with Safety Connect
response center will offer support in mul-
tiple languages.
●Select Lexus Enform with Safety Con-
nect-subscribed vehicles are capable of
communicating vehicle information, trig-
gering owner reminder notifications.
Owners who do not wish to have their
vehicle transmit this information can opt
out of the service at the time of enroll-
ment or by calling 1-800-255-3987 and
follow the prompt for Lexus Enform with
Safety Connect.
●For further details about the service, con-
tact your Lexus dealer.
●Lexus Enform with Safety Connect ser-
vices are not subject to section 255 of
the Telecommunications Act and the
device is not TTY compatible.

361
1. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE-OVERVIEW
CT200h_Navi_OM76146U_(U)14.06.17 09:48
9
LEXUS ENFORM, SAFETY CONNECT AND APP SUITE
4. TYPE C: FUNCTION ACHIEVED BY USING DCM
Of the functions included in Lexus Enform with Safety Connect, Safety Connect is
achieved through the operation of the DCM.
For details, refer to “Owner’s Manual”.

362
CT200h_Navi_OM76146U_(U)14.06.17 09:48
2. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE OPERATION
1. LEXUS App Suite
1Press the “MENU” button on the
Remote Touch.
2Select “LEXUS App Suite” .
3Select the desired application button.USING LEXUS App Suite
LEXUS App Suite is a service that en-
ables the usable contents of a cellular
phone to be displayed on and operated
from the navigation screen. Before
LEXUS App Suite can be used, a few
actions need to be performed first.
(→ P.356)
For details about the function and ser-
vice of each application, refer to
http://www.lexus.com/enform/
.
No.FunctionPage
Select to activate an appli-
cation.
Select to update all the ap-
plications.363
Select to reorder the appli-
cations.365
Displays the number of new
notifications for the appli-
cation

363
2. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE OPERATION
9
LEXUS ENFORM, SAFETY CONNECT AND APP SUITE
CT200h_Navi_OM76146U_(U)14.06.17 09:48
■DOWNLOADING THE UPDATED
DATA
1Select “Update” .
2Check that downloading is started.
“Download in Background” : Select to op-
erate other functions while downloading.
“Cancel” : Select to cancel updating.
3Check that downloading is completed.
X From the “Update” screen
X From the other screenUPDATING AN APPLICATION
When LEXUS App Suite is activated, an
application may need to be updated. By
updating, an application can be updated
to the latest version. To update the appli-
cation, it is necessary to download the
updated data and install it.
If an update is available, “Update” can
be selected.

364
2. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE OPERATION
CT200h_Navi_OM76146U_(U)14.06.17 09:48
zApplication download time will vary based
on speed of cellular network, and will take
some time.
z Application download can be resumed
after ignition off and back on.
z Future Mandatory updates will display an
on-screen pop-up when available.
■ INSTALLING THE UPDATED
DATA
1Select “Install” .
2Select “Continue” .
“Later” : Select to postpone the installation
of the updated data and go back to the pre-
vious screen.
No.Function
Select to install later. When this
screen button is selected, the screen
will return to the last displayed
screen. To install the updated data:
→ P.364
Select to display detailed update
data information.
Select to install the updated data.
Follow the steps “INSTALLING
THE UPDATED DATA” from
“STEP 2”. ( →P.364)
After the downloading is complete,
“Update” will be changed to “Install”.

365
2. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE OPERATION
9
LEXUS ENFORM, SAFETY CONNECT AND APP SUITE
CT200h_Navi_OM76146U_(U)14.06.17 09:48
3Check that installing is started.
“Install in Background” : Select to operate
other function while installing.
4Select “OK” after the installing is com-
plete.
1Display the “LEXUS App Suite” screen.
( → P.362)
2Select “Reorder” .
3Select the desired application to be
moved.
4Select “<<” or “>>” to move the applica-
tion, and select “OK”.
INFORMATION
●
LEXUS App Suite function cannot be
operated while installing.
REORDERING THE
APPLICATIONS
Order of the applications can be
changed.

366
2. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE OPERATION
CT200h_Navi_OM76146U_(U)14.06.17 09:48
IF A MESSAGE APPEARS ON THE SCREEN
When problems occur with starting up the application player, a message will appear
on the screen. Referring to the table below to identify the problem, take the suggested
corrective action.
MessageDisplay conditionsCorrective action
“This feature is unavailable
during an emergency call.”Safety Connect is being oper-
ated.After Safety Connect is fin-
ished, perform the operation
again.
“This feature is unavailable
while transferring contacts.”Contacts are being trans-
ferred manually from the
phonebook.When the transfer of contacts
is complete, perform the op-
eration.
“Unable to connect to a
Bluetooth* phone. For trou-
bleshooting assistance,
please visit the Lexus website
or contact your dealer.”
The cellular phone cannot be
connected.
Refer to http://
www.lexus.com/enform/ to
confirm if the phone is com-
patible or not.
“This feature is unavailable
during a handsfree call.”A hands-free call is in
progress.After the hands-free call is fin-
ished, perform the operation.
“To use the services, an active
application needs to be run-
ning on your phone. For more
information, please visit
lexus.com.”
The LEXUS App Suite appli-
cation cannot be connected
to Bluetooth
® SPP.
Refer to http://www.lexus.com/enform/ to
confirm if the phone is
Bluetooth
® SPP compatible
or not, and then activate the
LEXUS App Suite applica-
tion.
“Communication error.
Please try again.”Communication was discon-
nected.
After a few moments, retry the
operation.
Note: This may be caused by
poor connectivity with the cel-
lular network or the content
provider.
*: Bluetooth is a registered trademark of Bluetooth SIG, Inc.

367
2. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE OPERATION
9
LEXUS ENFORM, SAFETY CONNECT AND APP SUITE
CT200h_Navi_OM76146U_(U)14.06.17 09:48
1Press the “MENU” button on the
Remote Touch.
2Select “Nav”.
3Select “Dest.” .
4Select “Web Search” .
5Check that the “Web Search” screen is
displayed.
LINKING LEXUS App Suite
AND NAVIGATION LOCAL
FUNCTION
The navigation can set a destination and
make a hands-free call via LEXUS App
Suite. For details about the function and
service of each application, refer to
http://www.lexus.com/enform/
.

368
2. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE OPERATION
CT200h_Navi_OM76146U_(U)14.06.17 09:48
1Display the “Web Search” screen.
(→ P.367)
2Select the desired application button to
search.
3Enter a search term, and select “Go”.
4Select “Map”.
5Select “Go to ” .
6Select “OK” to start guidance.
SETTING A DESTINATION
USING LEXUS App Suite
Locations that were searched using
LEXUS App Suite can be set as a desti-
nation.
z For the operation of the route guidance
screen and the function of each screen
button: →P.1 2 1
z These application screens are shown for
illustrative purposes, and the actual
screens may vary based on application.

369
2. LEXUS ENFORM, SAFETY CONNECT AND APP SUITE OPERATION
9
LEXUS ENFORM, SAFETY CONNECT AND APP SUITE
CT200h_Navi_OM76146U_(U)14.06.17 09:48
1Display the “Web Search” screen.
(→ P.367)
2Select the desired application button to
search.
3Enter a search term, and select “Go”.
4Select “Call”.
5Select “Yes”.
“Cancel” : Select to cancel making a phone
call.
6Check that the “Call” screen is dis-
played.
MAKING A PHONE CALL
USING LEXUS App Suite
Phone calls can be made to locations
which were searched using LEXUS
App Suite.
z For phone operation and the function of
each screen button: →P. 3 1 7
z These application screens are shown for
illustrative purposes, and the actual
screens may vary based on application.