Lexus ES300 1998 Owner's Manuals (in English)

62L005±1
Temperature range anticipated before next oil change
ENGINE193
SPECIFICATIONS
± GENERALModel
Type
Bore and stroke
Displacement
Valve clearance (engine cold) Intake
Exhaust
Drive belt tension (with Borroughs drive belt tension gauge No.
BT±33±73F)
1MZ ± FE
6 cylinder V type, 4 cycle, gasoline
87.5 X 83 mm (3.44 X 3.27 in.)
2995 cm
3 (182.7 cu.in.)
0.15 ± 0.25 mm (0.006 ± 0.010 in.)
0.25 ± 0.35 mm (0.010 ± 0.014 in.)
115
20 lb.
± LUBRICATION SYSTEM
Oil capacity Drain and refillwith filter
without filter
Oil grade
Recommended oil viscosity (SAE):
4.7 L (5.0 qt., 4.1 lmp.qt.)
4.5 L (4.8 qt., 4.0 lmp.qt.)
API SH, ºEnergy±Conserving IIº or SJ, ºEnergy±Conservingº multigrade
engine oil or ILSAC multigrade engine oil
± COOLING SYSTEM

ENGINE
194
Capacity
Coolant type
9.2 L (9.7 qt., 8.2 lmp.qt.)
Ethylene ± glycol coolant (Do not use alcohol type.)
± FUEL
Fuel type
Octane Rating
Only UNLEADED
87 (Research Octane Number 91) or higher
± IGNITION SYSTEMSpark plug ± Make DENSO NGK
± Gap
PK20TR11
BKR6EKPB11
1.1 mm (0.043 in.)
± ELECTRICAL SYSTEM
Battery ± Maintenance type battery Specific gravity reading at 20 C (68F):
Charging rates Quick charge Slow charge
± Non±maintenance battery Open voltage at 20C (68F):
Charging rates
1.260 Fully charged
1.160 Half charged
1.060 Discharged
15A max.
5A max.
12.7V Fully charged
12.3V Half charged
11.9V Discharged
[Voltage that is checked 20 minutes after the key is removed with all the
lights turned off]
5A max.

ENGINE195
FUEL
Fuel type
Your vehicle must use only unleaded gasoline.
To help prevent gas station mixups, your Lexus has a smaller fuel tank
opening. The special nozzle on pumps with unleaded fuel will fit it, but the
larger nozzle on pumps with leaded gas will not.
At a minimum, the gasoline you use should meet the specifications of ASTM
D4814 in the U.S.A. and CGSB 3.5±M93 in Canada.
NOTICE
Do not use leaded gasoline. Use of leaded gasoline will cause the
three±way catalytic converter/warm up three±way catalytic converter to
lose its effectiveness and the emission control system to function
improperly. Also, this can increase maintenance costs.
Octane rating
Select Octane Rating 87 (Research Octane Number 91) or higher. For
improved vehicle performance, the use of premium unleaded gasoline
with an Octane Rating of 91 (Research Octane Number 96) or higher is
recommended.
Use of unleaded fuel with an Octane Rating or Research Octane Number
lower than stated above will cause persistent heavy knocking. If it is sever\
e,
this will lead to engine damage. If your engine knocks ...
If you detect heavy knocking even when using the recommended fuel, or if\
you hear steady knocking while holding a steady speed on level roads, consu\
lt
your Lexus dealer.
However, now and then, you may notice light knocking for a short time while
accelerating or driving up hills. This is no cause for concern.
Gasolines containing detergent additives
Lexus recommends use of gasolines that contain detergent additives to
avoid build±up of engine deposits.
For further details, ask your Lexus dealer or a local gasoline retailer.
Improved gasolines
The American Automobile Manufacturers Association (AAMA) has
developed a specification of improved gasolines. The AAMA
specification offers optimal fuel information for better vehicle
performance and better protection of your engine.
Lexus recommends the use of gasolines that meet the AAMA specification,
if available, for improved drivability and emission control system.

ENGINE
196
Gasolines containing MTBE
Gasolines that contain MTBE (Methyl Tertiary±Butyl Ether) are
available in the market. If you use a gasoline mixed with MTBE, make
certain that it does not contain more than 15% of MTBE.
If the use of gasolines containing MTBE causes poor drivability and/or p\
oor
fuel economy, you should stop using them.
Gasolines containing MMT
Some gasolines contain an octane±enhancing additive called MMT
(methylcyclopentadienyl manganese tricarbonyl).
Lexus does not recommend the use of gasolines that contain MMT. If fuels
containing MMT are used, your emission control system may be adversely
affected. The Malfunction Indicator Lamp on the instrument cluster may
come on. If this happens, contact your Lexus dealer for service.
Gasolines containing alcohol
Gasohol is a mixture of gasoline and ethanol. If you use gasohol in your
Lexus, be sure that it is unleaded, has an octane rating no lower than 87
and does not contain more than 10% ethanol. Lexus does not recommend
the use of gasolines containing methanol.
If you use gasoline containing methanol, use only gasoline meeting the
requirements above and also containing less than 5% methanol with
cosolvents and corrosion inhibitors for methanol.
NOTICE
 Do not use gasohol other than stated above. It will cause fuel system
damage or vehicle performance problems.
 If drivability problems are encountered (poor hot starting, vaporizing,
engine knock, etc.), discontinue its use.
 Take care not to spill gasohol during refueling. Gasohol may cause
paint damage.
Fuel tank capacity
70 L (18.5 gal., 15.4 lmp.gal.)
FACTS ABOUT ENGINE OIL
CONSUMPTION
Functions of engine oil
Engine oil has the primary function of lubricating and cooling the inside of th\
e
engine, and plays a major role in maintaining the engine in proper working
order.

ENGINE197
Engine oil consumption
It is normal that an engine should consume some engine oil during normal
engine operation. The causes of oil consumption in a normal engine are
as follows.
Oil is used to lubricate pistons, piston rings and cylinders. A thin film of
oil is left on the cylinder wall when a piston moves downwards in the
cylinder. High negative pressure generated when the vehicle is
decelerating sucks some of this oil into the combustion chamber. This oil
as well as some part of the oil film left on the cylinder wall is burned b\
y the
high temperature combustion gases during the combustion process.
 Oil is also used to lubricate the stems of the intake valves. Some of this\
oil
is sucked into the combustion chamber together with the intake air and i\
s
burned along with the fuel. High temperature exhaust gases also burn the
oil used to lubricate the exhaust valve stems. The amount of engine oil consumed depends on the viscosity of the oil, the
quality of the oil and the way the vehicle is driven.
More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
A new engine consumes more oil, since its pistons, piston rings and cyli\
nder
walls have not become conditioned.
When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level
accurately.
For example, if a vehicle is used for repeated short trips and consumes \
a
normal amount of oil, the dipstick may not show any drop in the oil level at
all, even after 1000 km (600 miles) or more. This is because the oil \
is
gradually becoming diluted with fuel or moisture, making it appear that the
oil level has not changed.
The diluting ingredients evaporate out when the vehicle is then driven at high
speeds, as on an expressway, making it appear that oil is excessively
consumed after driving at high speeds.
Importance of engine oil level check
One of the most important points in proper vehicle maintenance is to keep t\
he
engine oil at the optimum level so that oil function will not be impaired.
Therefore, it is essential that the oil level be checked regularly. Lexus
recommends that the oil level be checked every time you refuel the vehicle.
NOTICE
Failure to check the oil level regularly could lead to serious engine
trouble due to insufficient oil.
For detailed information on oil level check, see ºChecking the engine\
oil
levelº on page 198.

ENGINE
198
USED ENGINE OIL
CAUTION
Used engine oil contains potentially harmful contaminants
which may cause skin disorders such as inflammation or
skin cancer, so care should be taken to avoid pr olonged and
repeated contact with it. To remove used engine oil from
your skin, wash thoroughly with soap and water.
 Do not leave used oil within the reach of children.
 Dispose of used oil and used oil filters only in a safe and
acceptable manner. Do not dispose of used oil and used oil
filters in household trash, in sewers or onto the ground.
Call your Lexus dealer or a service station for information
concerning recycling or disposal.
CHECKING THE ENGINE OIL LEVEL
62E001±1
With the engine at operating temperature and turned off, check the oil
level on the dipstick.
1. To get a true reading, the vehicle should be on a level spot. After turni\
ng
off the engine, wait a few minutes for the oil to drain back into the bott\
om of
the engine.
2. Pull out the dipstick, and wipe it clean with a rag.
3. Reinsert the dipstick and push it in as far as it will go, or the reading will
not be correct.
62E002

ENGINE199


1
Add oil 2O.K. 3Too full
4. Pull the dipstick out and look at the oil level on the end. If it is between
the full line (
5 ) and the low line ( 4 ), it is O.K.
62E003±1
If the oil level is below or only slightly above the low line, add engin\
e oil
of the same type as already in the engine.
Remove the oil filler cap and add engine oil a little at a time, checking the
dipstick. The approximate quantity of oil needed to fill between the low line
and the full line on the dipstick is indicated below for reference.
When the level reaches within the correct range, return the filler cap and t\
urn
the cap clockwise until you hear a click.
Oil quantity. L (qt., lmp. qt.) 1.5 (1.6, 1.3)
NOTICE
Avoid overfilling, or the engine could be damaged. Check the oil level on
the dipstick once again after adding the oil.

ENGINE
200
Engine oil selection
Use API SH, ºEnergy±Conserving IIº or SJ, ºEnergy±Conservingº
multigrade engine oil or ILSAC multigrade engine oil.
Recommended viscosity (SAE):
62L005±1
Temperature range anticipated before next oil change
SAE 5W±30 is the best choice for your vehicle, for good fuel economy, and
good starting in cold weather.
If you use SAE 10W±30 engine oil in extremely low temperatures, the
engine may become difficult to start, so SAE 5W±30 engine oil is
recommended.
Oil identification marks
62L006±1

API Service Symbol
ILSAC Certification Mark
Either or both API registered marks are added to some oil containers to help
you select the oil you should use.
 The API Service Symbol is located anywhere on the outside of the
container.
The top portion of the label shows the oil quality by API (American
Petroleum Institute) designation such as SJ. The center portion of the label
shows the SAE viscosity grade such as SAE 5W±30.
ºEnergy±Conservingº, shown in the lower portion, indicates that the oil
has fuel±saving capabilities.
 The ILSAC (International Lubricant Standardization and Approval
Committee) Certification Mark is displayed on the front of the container.

ENGINE201
CHECKING THE ENGINE COOLANT LEVEL
62E004±3

1Reservoir cap 2Upper line 3Lower line
Park the vehicle at a level spot and look at the see±through coolant
reservoir when the engine is cool. The coolant level is satisfactory if it is
between the upper and lower lines on the tank. If the level is low, add
ethylene±glycol type coolant.
The coolant level in the reservoir will vary with engine coolant temperatur\
e.
However, if the level is on or below the lower line, add coolant to bring the
level up to the upper line.
Use only ethylene±glycol type coolant. For information on ethylene±g\
lycol
coolant, see also ºEngine coolant selectionº described below.
If the coolant level drops within a short time after replenishing, there\
may be
a leak in the system. Visually check the radiator, hoses, radiator cap, drain
cock and water pump. If you can find no leak, have your Lexus dealer test the cap pressure and \
check
for leaks in the cooling system.
CAUTION
To prevent burning yourself, do not remove the radiator cap
when the engine is hot.
Engine coolant selection
Your coolant must contain ethylene±glycol antifreeze. In addition to
preventing freezing and subsequent damage to the engine, this will also
prevent corrosion. Further supplemental inhibitors or additives are neither
needed nor recommended.
Read
the antifreeze container for information on freeze protection. Follow t\
he
manufacturer 's directions for how much to mix with water. The total capacity
of the cooling system is given on page 193. We recommend 50% solution be
used for your Lexus, or a sufficient quantity to provide protection to about
±35 C (±31F).
NOTICE
Do not use alcohol type antifreeze or plain water alone.

SECTION 6 ± 3
202
SERVICE PROCEDURES AND SPECIFICATIONS
Chassis
Specifications203
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . .
Checking brake fluid 205
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . .
Checking power steering fluid 206
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . .
Checking tire pressure 207
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . .
Rotating tires 208
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . . . . . .
Checking and replacing tires 208
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . .
Installing snow tires and chains 210
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . .
Replacing wheels 212
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . . . . . .
Aluminum wheel precautions 212
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . .
Suspension and chassis 212
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . . . . . . . . . .