lock LEXUS ES300 2005 User Guide

C89119
N´m (kgf´cm, ft´lbf): Specified torque
 Non-reusable partO-Ring 
 Precoated partx 18
Automatic Transaxle
Oil Pan Sub-assyAutomatic Transaxle
Oil Pan Gasket Valve Body
Oil Strainer AssyOil Cleaner
Magnet
 
Oil Strainer Gasket
11 (110, 8 )
x 17 Transmission Valve Body Assy
Parking Lock
Rod Sub-assy
Parking Lock
Pawl Bracket
Manual Detent
Spring Sub-assy11 (110, 8)
20 (205, 15)
20 (205, 15)
C-3 Accumulator
Piston
O-Ring 
Compression
Spring
O-Ring O-Ring 
B-3 Accumulator
Piston Compression Spring
Reverse Clutch
Accumulator PistonCompression Spring
Washer Control Shaft Lever
Nut Stopper Park/ Neutral
Position SwitchManual Valve Lever Shaft Oil Seal Manual Valve Lever Shaft Sloted Spring Pin Retainer Spring Spacer
13 (130, 9)
6.9 (70, 61 in.Vlbf)
5.4 (55, 48 in.Vlbf)
x 5 O-Ring x 8O-Ring  Transaxle Apply Tube ClampAutomatic Transaxle
Case Sub-assyTransaxle Rear Cover
x 11
Governor Apply Gasket
Transaxle Case
2nd Brake Gasket Differential Gear
Lube Apply Tube
Brake Drum Gasket
7.4 (75, 65 in.Vlbf)
29 (295, 21)
9.8 (100, 87 in.Vlbf)
25 (255, 18)
Case Plug
Spring
Check Ball
Body
Bolt A: 18.6 (190, 14)
Other bolt: 24.5 (250, 18)
U151E:
x 3
33 (337, 24)
11.8 (120, 9)
7.8 (80, 69 in.Vlbf)
40-2- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)
26 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

D26594
O-Ring 
N´m (kgf´cm, ft´lbf): Specified torque
 Non-reusable part Thrust Needle
Roller Bearing Thrust Bearing
Underdrive Race No. 2Underdrive
Planetary
Gear AssyUnderdrive Clutch Assy
Snap RingFlangePlate
Disc
Underdrive 1-Way
Clutch Assy
Bearing Race
Snap Ring
Underdrive Brake Return
Spring Sub-assyUnderdrive Clutch
Drum Oil Seal RingNeedle Roller
Bearing Underdrive Brake Piston

Parking Lock Pawl
Parking Lock Pawl Shaft
Torsion
Spring
Parking Lock Pawl Pin
Pawl Shaft Clamp
9.8 (100, 87 in.Vlbf)
Front Differential Assy
Clutch Apply Tube
Brake Apply Tube
Transaxle Apply
Tube Clamp
Governor Apply Gasket No. 1 
5.4 (55, 48 in.Vlbf)
U151E:
Thrust Bearing 40-4
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)
28 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

C89116
N´m (kgf´cm, ft´lbf): Specified torque
 Non-reusable partO-Ring 
 Precoated partx 18
Automatic Transaxle
Oil Pan Sub-assyAutomatic Transaxle
Oil Pan Gasket Valve Body
Oil Strainer AssyOil Cleaner
Magnet
 
Oil Strainer Gasket
11 (110, 8 )
x 17 Transmission Valve Body Assy
Parking Lock
Rod Sub-assy
Parking Lock
Pawl Bracket
Manual Detent
Spring Sub-assy11 (110, 8)
20.1 (205, 15)
20 (205, 15)
C-3 Accumulator
Piston
O-Ring 
Compression
Spring
O-Ring O-Ring 
B-3 Accumulator
Piston Compression Spring
Reverse Clutch
Accumulator PistonCompression Spring
Washer Control Shaft Lever
Nut Stopper Park/ Neutral
Position SwitchManual Valve Lever Shaft Oil Seal Manual Valve Lever Shaft Sloted Spring Pin Retainer Spring Spacer
13 (130, 9)
6.9 (70, 61 in.Vlbf)
5.4 (55, 48 in.Vlbf)
x 5 O-Ring x 8O-Ring  Transaxle Apply Tube ClampAutomatic Transaxle
Case Sub-assyTransaxle Rear Cover
x 11
Governor Apply Gasket
Transaxle Case
2nd Brake Gasket Differential Gear
Lube Apply Tube
Brake Drum Gasket
7.4 (75, 65 in.Vlbf)
29.4 (300, 21.7)
9.8 (100, 87 in.Vlbf)Case Plug
Spring
Check Ball
Body
Bolt A: 18.6 (190, 14)
Other bolt: 24.5 (250, 18)
U151F:
x 3
33 (337, 24)
12 (120, 9)
7.8 (80, 69 in.Vlbf)
25 (255, 18)
40-6- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)
30 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

C89125
O-Ring 
N´m (kgf´cm, ft´lbf): Specified torque
 Non-reusable partThrust Needle
Roller Bearing Thrust Bearing
Underdrive Race No. 2Underdrive Planetary
Gear AssyUnderdrive Clutch Assy
Snap RingFlangePlate
Disc
Underdrive 1-Way
Clutch Assy
Thrust Bearing Race
Needle Roller Bearing
Snap Ring
Underdrive Brake Return
Spring Sub-assyUnderdrive Clutch
Drum Oil Seal RingNeedle Roller
Bearing Underdrive Brake Piston

Parking Lock Pawl
Parking Lock Pawl Shaft
Torsion
Spring
Parking Lock Pawl Pin
Pawl Shaft Clamp
9.8 (100, 87 in.Vlbf)
Front Differential Assy
Clutch Apply Tube
Brake Apply Tube
Transaxle Apply
Tube Clamp
Governor Apply Gasket No. 1 
U151F:
5.4 (55, 48 in.Vlbf)
40-8- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)
32 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

D03683 Non-reusable partCylindrical
Roller Bearing
Inner Race
Differential
Drive PinionParking Lock Gear
Radial Ball Bearing FRUnderdrive Planetary
Ring Gear
Snap Ring
Counter Driven GearUnderdrive Planetary Gear
Radial Ball Bearing RR 
280 (2,855, 207)
N´m (kgf´cm, ft´lbf): Specified torqueLock Nut


- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSMISSION /
TRANSAXLE (U151E/U151F)40-13
37 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)

4010K-01
D09644
Control Shaft Lever
D09643
Lock Nut
Nut Stopper
D09639
Park/neutral Position Switch
40-18
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSAXLE ASSY (U151E/U151F)
42 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)
AUTOMATIC TRANSAXLE ASSY (U151E/U151F)
OVERHAUL
1. REMOVE SPEEDOMETER DRIVEN HOLE (ATM) COVER SUB-ASSY
(a) Remove the bolt and speedometer driven hole cover sub-assy from the transaxle assy.
(b) Remove the O-ring from the speedometer driven hole cover.
2. REMOVE PARK/NEUTRAL POSITION SWITCH ASSY
(a) Remove the nut, washer and control shaft lever.
(b) Using a screwdriver, unstake the nut stopper, and re-
move the lock nut and nut stopper.
(c) Remove the 2 bolts and pull out the park/neutral position
switch.
3. REMOVE BREATHER PLUG HOSE
(a) Remove the breather plug hose from the transaxle case.

C91925
C86316
Magnet
AT0103
Magnet
C91927
Temperature
Sensor
D03547
Transmission Wire
40-20
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSAXLE ASSY (U151E/U151F)
44 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)
9. REMOVE AUTOMATIC TRANSAXLE OIL PAN
SUB-ASSY
(a) Remove the 18 bolts, oil pan and gasket.
(b) Remove the 2 magnets from the oil pan.
10. INSPECT TRANSMISSION OIL CLEANER MAGNET
(a) Remove the magnets and use them to collect any steel
chips. Examine the chips and particles in the pan and on
the magnet to determine what type of wear has occurred
in the transaxle:
Steel (magnetic).... bearing, gear and plate wear
Brass (non-magnetic).... bushing wear
11. DISCONNECT TRANSMISSION WIRE
(a) Remove the 7 connectors from the shift solenoid valves.
(b) Remove the bolt, lock plate and ATF temperature sensor.
12. REMOVE TRANSMISSION WIRE
(a) Remove the bolt and transmission wire from the transaxle
case.

D03560
C56727
D03563
D03564
D03565
40-24
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSAXLE ASSY (U151E/U151F)
48 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)
23. REMOVE MANUAL DETENT SPRING SUB-ASSY
(a) Remove the 2 bolts, the manual detent spring sub-assy
and cover.
24. REMOVE PARKING LOCK PAWL BRACKET
(a) Remove the 2 bolts and parking lock pawl bracket.
25. REMOVE MANUAL VALVE LEVER SUB-ASSY
(a) Using a chisel and hammer, cut off and remove the
spacer.
(b) Using a pin punch (f35 mm) and hammer, drive out the
pin.
HINT:
Slowly drive out the pin so that it will not fall into the transaxle
case.
(c) Remove the manual valve lever shaft and manual valve
lever.

D26382
Parking Lock Rod Sub-assy
D03566
D08046Oil Pump Assy
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSAXLE ASSY (U151E/U151F)
40-25
49 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)
26. REMOVE PARKING LOCK ROD SUB-ASSY
(a) Remove the parking lock rod from the manual valve lever.
27. REMOVE MANUAL VALVE LEVER SHAFT OIL SEAL
(a) Using a screwdriver, remove the oil seal from the trans-
axle case.
28. FIX AUTOMATIC TRANSAXLE ASSY
(a) Fix the transaxle case with the oil pump side facing up.
29. INSPECT INPUT SHAFT ENDPLAY
(a) Using a dial indicator, measure the input shaft endplay.
Endplay: 0.262 - 1.244 mm (0.01 - 0.049 in.)

D03829
Dial Indicator
Forward Clutch Hub
D03576
Pawl Shaft Clamp
D09652
D09689
40-28
- AUTOMATIC TRANSMISSION / TRANSAUTOMATIC TRANSAXLE ASSY (U151E/U151F)
52 Author
: Date
:
U151E, U151F A/T REPAIR MANUAL (RM1021U)
38. INSPECT MULTIPLE DISC CLUTCH CLUTCH HUB
(a) Using a dial indicator, measure the inside diameter of the
forward clutch hub bushing
Standard inside diameter:
23.025 - 23.046 mm (0.9065 - 0.9073 in.)
Maximum inside diameter: 23.09 mm (0.9091 in.)
NOTICE:

When the diameter is over the maximum, replace the
multiple disc clutch hub with new one.

Check the contact surface of the bush in the direct
clutch shaft. If any scratch or discolor is identified, re-
place the direct clutch sub-assy with new one.
If the inside diameter is greater than the maximum, replace the
forward clutch hub.
39. REMOVE UNDERDRIVE PLANETARY GEAR ASSY
(a) Remove the bolt and pawl shaft clamp.
(b) Remove the parking lock pawl shaft.
(c) Push the parking lock pawl.
HINT:
Failure to do so will cause interference when the underdrive
planetary gear is removed.