steering wheel Lexus ES300h 2014 Navigation Manual

164
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select “Messages”.
zWhen “Message Transfer” is set to “Off”, a
confirmation screen will be displayed.
Select “Yes”. (See page 187.)
2Select the “SMS/MMS” tab and then
select the desired received message
from the list.
z The tab display may vary depending on the
type of cellular phone.
3Select or press the switch on
the steering wheel.
CALLING USING AN SMS/
MMS MESSAGE
Calls can be made to an SMS (Short
Message Service)/MMS (Multimedia
Messaging Service) message sender’s
phone number.
This can be operated while driving.
BY POI CALL
A call can be made by selecting
when it is displayed on the screen from
the navigation system. (See “TO SEE
INFORMATION ABOUT THE ICON
WHERE THE CURSOR IS SET” on
page 42 and “VIEW DETAILED FUEL
PRICE INFORMATION” on page
335.)

165
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
5. RECEIVE ON THE Bluetooth® PHONE
1Select or press the switch on
the steering wheel to talk on the phone.
When a call is received, this screen is
displayed with a sound.
To refuse to receive the call: Select
or press the switch on the
steering wheel.
To adjust the volume of a received call :
Select “-” or “+”, turn the “PWR·VOL”
knob, or use the volume switch on the
steering wheel.
INFORMATION
●
During international phone calls, the
other party’s name or number may not be
displayed correctly depending on the
type of cellular phone you have.
●The incoming call display mode can be
set. (See “INCOMING CALL DIS-
PLAY” on page 192.)

166
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6. TALK ON THE Bluetooth® PHONE
1Select the desired number to input the
key.
While talking on the phone, this screen is
displayed. The operations outlined be-
low can be performed on this screen.
To adjust the volume of the other party’s
voice: Select “-” or “+” , turn the
“PWR·VOL” knob, or use the volume
switch on the steering wheel.
To hang up the phone : Select or
press the switch on the steering
wheel.
To mute your voice : Select “Mute”.
To i n p u t a k e y : Select “0-9”.
To transfer the call : Select “Handset
Mode” to change from hands-free call to
cellular phone call. Select “Handsfree
Mode” to change from cellular phone call
to hands-free call.
INFORMATION
●
Changing from hands-free call to cellular
phone call is not possible while driving.
●When cellular phone call is changed to
hands-free call, the ha nds-free screen will
be displayed and its functions can be
operated on the screen.
●Changing between cellular phone call
and hands-free call can be performed by
operating the cellular phone directly.
●Transferring methods and operations will
be different depending on the type of cel-
lular phone you have.
●For the operation of the cellular phone,
see the manual that comes with it.
WHEN YOU SELECT “0-9”
INPUTTING A KEY
Inputting a key is not possible while driv-
ing.
To hang up the phone : Select or
press the switch on the steering
wheel.

167
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Confirm the number displayed on the
screen and select “Send”. The number
before marked sign will be sent.
z When “Clear ” is selected, this function is
finished and the normal tone screen
appears.
TONE SIGNAL
If a continuous tone signal is registered
in a phonebook, this screen appears. (If
not registered, “Send” and “Clear ” are
not displayed.) This can be operated
while driving.
To hang up the phone : Select or
press the switch on the steering
wheel.
INFORMATION
●
The continuous tone signal is the marked
sign (p or w) and the number that follows
the phone number. (e.g.
056133w0123p#1 ½)
●When the “p” pause tone is used, after
waiting 2 seconds the tone data up until
the next pause tone will be automatically
sent. When the “w” pause tone is used,
the tone data up until the next pause tone
will be automatically sent after user oper-
ation.
●This operation can be done when it is
desirable to operate an answering
machine or use a telephone service in a
bank for example. The phone number
and the code number in the phonebook
can be registered.
BY VOICE RECOGNITION
“Send Tones” can be operated by giving
a command during a call.
z The operating procedure is similar to
other voice recognition operations. (For
the operation of voice recognition, see
“VOICE COMMAND SYSTEM” on
page 308.)

168
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Select or press the switch
on the steering wheel to start talking
with the other party.
INCOMING CALL WAITING
When a call is interrupted by a third par-
ty while talking, this screen is displayed.
zSelect or press the switch
on the steering wheel to refuse the call.
zEach time is selected or the
switch on the steering wheel is pressed
during an interrupted call, the party who
is on hold will be switched.
INFORMATION
●
If your cellular phone does not support
HFP Ver. 1.5, this function cannot be used.
●The ring tone that has been set in the
“Phone Sound Settings” screen sounds
when there is an incoming call. Depend-
ing on the type of Bluetooth
® phone,
both the navigation system and
Bluetooth
® phone may sound simulta-
neously when there is an incoming call.
(See “RING TONE SETTING” on page
173.)

169
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
7. Bluetooth® PHONE MESSAGE FUNCTION
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Phone” on the “Menu” screen.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
3Select “Messages” .
zDepending on the type of Bluetooth®
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
z When “Message Transfer” is set to “Off ”, a
confirmation screen will be displayed.
Select “Yes”. (See page 187.)
4Select the screen button corresponding
to the desired message.
zMessages are displayed in the appropriate
connected Bluetooth® phone’s registered
mail address folder. Select the tab of the
desired folder to be displayed.
5Messages can be checked.
z Selecting “Previous” or “Next” displays the
previous or next message.
z Only received messages on the connected
Bluetooth
® phone can be displayed.
z The text of the message is not displayed
while driving.
Received messages can be forwarded
from the connected Bluetooth
® phone,
enabling checking and replying using
the navigation system (Quick reply).
CHECKING MESSAGES

170
1. PHONE OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6Select “Play” to start reading out of the
message. Select “Stop” to stop the func-
tion.
z Select “-” or “+”, turn the “PWR·VOL”
knob, or use the volume switch on the
steering wheel to adjust the message read
out volume.
z The message read out function is available
even while driving.1Select “Reply” .
2Select the screen button corresponding
to the desired message.
3Select “Send” .
zWhile the message is being sent, a sending
message screen is displayed.
4This screen will be displayed if message
delivery fails.
zSelect “Retry” to attempt to send the mes-
sage again or select “Cancel” to cancel.
zWhen the received message is an e-mail
and “Update Message Read Status on
Phone” is set to “On”, “Mark as Unread”
or “Mark as Read” can be selected.
Select “Mark as Unread” to mark mails
that have been read on the Bluetooth
®
phone as unread. Conversely, select
“Mark as Read” to mark mails that have
not been read on the Bluetooth
® phone
as read. (See “MESSAGE SETTINGS”
on page 187.)
z For SMS/MMS, selecting or
pressing the switch on the steering
wheel calls the sender. (See page 164.)
z Select “Reply” to reply to the message.
(See page 170.)
REPLYING (QUICK REPLY)

171
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Reply messages can be edited while the
vehicle is parked. Select “Edit”.
2Select the screen bu tton corresponding
to the desired message.
3Select “OK” when editing is completed.
4Select .
1Select “Read” to check the message.
zThe “Messages” screen will be displayed.
z When “Automatic Message Readout” is
set to “On”, the message will be automati-
cally read out. (See “MESSAGE SET-
TINGS” on page 187.)
EDITING REPLY MESSAGESNEW MESSAGE
NOTIFICATION
If “New Message Pop-up” and “New
Message Voice Notification” are set to
“On” , a notification appears on the
screen and a voice notification will be
heard when a new message arrives.
(See “MESSAGE SETTINGS” on page
187.)
z For SMS/MMS, selecting or
pressing the switch on the steering
wheel calls the sender. (See page 164.)
z To check the message later, select
“Ignore” or .

175
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
■THE “Contacts” SCREEN CAN
ALSO BE DISPLAYED
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select “Options” .
4Select “Manage Contacts” .
■TRANSFERRING A PHONE NUM-
BER
X For PBAP compatible Bluetooth®
phones
1Select “Transfer Contacts” .
2Select “Update Contacts” .
The phone numbers in a Bluetooth®
phone can be transferred to the system.
The system can manage up to 5 phone-
books. Up to 1000 contacts (maximum
of 3 numbers per contact) can be regis-
tered in each phonebook.
Operation methods differ between
PBAP compatible and PBAP incompat-
ible but OPP compatible Bluetooth
®
phones.
If your cellular phone is neither PBAP
nor OPP compatible, the phonebook
cannot be transferred.

178
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
XFrom “Contacts” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select “Transfer” .
4This screen is displayed. The following
operations are performed in the same
manner as when they are performed
from the “Setup” screen.
■REGISTERING THE PHONE-
BOOK DATA
1Select “New Contact” .
2Use the software keyboard to input the
name and select “OK” .
3Input the phone number and select
“OK”.
zTo use a tone signal after the phone num-
ber, input the tone signal too.
Phonebooks of PBAP incompatible but
OPP compatible phones can also be
transferred from the “Contacts” screen.
The phonebook data can be registered.
Up to 3 numbers per person can be reg-
istered. New phonebook data cannot be
added for PBAP compatible
Bluetooth
® phones.