CD changer Lexus ES350 2008 Audio/video System

AUDIO/VIDEO SYSTEM
224
(f) If the changer malfunctions
If the changer or another unit equipped
with the changer malfunctions, your audio
system will display following messages.
If No CDº appears on the display: It in-
dicates that there is no disc in the CD
changer.
If CD

Checkº appears on the dis-
play: It indicates that the disc dirty, dam-
aged, or it was inserted upside down.
Clean the disc or insert it correctly. If a disc
which is not playable is inserted, CD


Checkº will also appear on the screen. For
appropriate discs for this player, see Au-
dio/video system operating hintsº on page
248.
If CD Errorº appears on the display:
The following causes are possible.
There is a trouble inside the system.
Eject the disc.
The inside of the changer unit may be
too hot due to the very high ambient
temperature. Eject the disc and allow
the changer to cool down.
If NO MUSIC FILEº appears on the dis-
play: It indicates that the disc has no play-
able data.
If the malfunction is not rectified: Take
your vehicle to your dealer.
If an MP3/WMA disc contains CD-DA
files, only CD-DA files are played. If an
MP3/WMA disc contains files other than
CD-DA, only MP3/WMA files are played.The DVD changer can play audio CDs,
video CDs, CD text, WMA discs, MP3
discs, DVD video discs and DVD audio
discs.
Audio CD, CD text 215. . . . . . . . .
MP3/WMA disc 218. . . . . . . . . . .
DVD video, DVD audio 229. . . . .
Video CD 241. . . . . . . . . . . . . . . . .
For appropriate discs for this changer, see
Audio/video system operating hintsº on
page 248.
For safety reasons, you can enjoy DVD
video discs, DVD audio discs and video
CDs only when the vehicle is completely
stopped with the ENGINE START STOPº
switch is in the ACCESSORY or IGNITION
ON mode and the parking brake applied.
While you are driving, you can hear audio
alone even in the DVD video, DVD audio
or video CD mode.
Ð DVD changer operation

AUDIO/VIDEO SYSTEM
225
(a) Inserting or ejecting discs
The ENGINE START STOPº switch must
be in the ACCESSORY or IGNITION ON
mode.
Your DVD changer can store up to 6 discs.
Setting a single disc:
1. Push the LOADº button briefly.
The amber indicators at both ends of the
slot start blinking. After the amber indica-
tors change to green and stay on, the DVD
changer door will open.
2. Insert only one disc while the DVD
changer door is open.
You can set a disc at the lowest empty disc
number.
After insertion, the set disc is automatically
loaded.
If the label faces down, the disc cannot be
played. In this case, DISC
Checkº ap-
pears on the screen.
If you do not insert the disc within 15 sec-
onds after pushing the LOADº button, the
beep will sound and the operation will be
canceled automatically.
If you need to insert the next disc, repeat
the same procedure to insert another disc.

AUDIO/VIDEO SYSTEM
226 
Setting all the discs:
1. Push the LOADº button until you
hear a beep.
The amber indicators at both ends of the
slot start blinking. After the amber indica-
tors change to green and stay on, the DVD
changer door will open.
2. Insert only one disc while the DVD
changer door is open.
The DVD changer door closes and the am-
ber indicators start blinking.3. Insert the next disc after the amber
indicators change to green and stay on
and the DVD changer door opens.
4. Repeat this procedure until you in-
sert all the discs.
To cancel the operation, push the LOADº
or DISC´AUXº button.
If you do not insert the discs within 15 sec-
onds after pushing the LOADº button, the
beep will sound and the operation will be
canceled automatically.
NOTICE
Do not insert one disc stacked on top
of another one or feed them in contin-
uously, to prevent discs from getting
stuck in the changer.

AUDIO/VIDEO SYSTEM
228
(b) Playing a disc
Push the DISC´AUXº button if the disc
are already loaded in the DVD changer.
The DVD CHANGERº screen will be dis-
played.
The discs set in the DVD changer are
played continuously, starting with the last
disc you inserted. The disc number of the
disc currently being played, the track or
title and chapter number and the time from
the beginning of the program are shown on
the display.
Audio disc and MP3/WMA disc only Ð
When play of one disc ends, the first track
of the following disc starts. When play of
the final disc ends, play of the first disc
starts again.
The changer will skip any empty disc trays.(c) Selecting a desired disc
On the screen:
Touch the desired disc number.
The selected disc number is highlighted.
The changer will start playing the selected
disc from the first track.
On the audio panel:
Push the 
º or º button of CH/
DISCº.
When you release the button, the changer
will start playing the selected disc from the
first track.

AUDIO/VIDEO SYSTEM
229
(d) Operating a DVD disc
NOTE: The playback condition of some
DVD discs may be determined by a DVD
software producer. This DVD changer
plays a disc as the software producer in-
tended. So some functions may not work
properly. Be sure to read the instruction
manual for the DVD disc separately pro-
vided. For the detailed information about
DVD video discs, see (g) DVD player and
DVD video disc informationº on page 244.
Precautions on DVD video disc
When recording with a DVD video, DVD
audio or video CD, audio tracks may not
record in some cases while the menu is
displayed. As audio will not play in this
case, verify that the video tracks are play-
ing and then activate playback.
When playback of a disc is completed:
If an audio CD or MP3/WMA disc is
playing, the first track or file starts.
If a DVD video, DVD audio or video CD
is playing, playback will stop or the
menu screen will be displayed.
The title/chapter number and playback
time display may not appear while playing
back certain DVD video discs.
CAUTION
Conversational speech on some
DVDs is recorded at a low volume to
emphasize the impact of sound ef-
fects. If you adjust the volume as-
suming that the conversations repre-
sent the maximum volume level that
the DVD will play, you may be startled
by louder sound effects or when you
change to a different audio source.
The louder sounds may have a signif-
icant impact on the human body or
pose a driving hazard. Keep this in
mind when you adjust the volume.
This DVD Hint!º screen appears when
the video screen is first displayed after
the ENGINE START STOPº switch is in
the ACCESSORY or IGNITION ON
mode.
Touch OKº when you read the message.

AUDIO/VIDEO SYSTEM
232
TOP PAGE OF DVD AUDIO CONTROLS
Top Menuº: If you touch this button, the
menu screen for DVD audio appears. (For
operation, refer to the DVD audio disc
manual that is provided separately.)
AUDIOº: The audio changing screen ap-
pears. (See page 236.)
: The menu control key appears on
the screen. (See page 232.)
: Touch this button to pause the
disc.
: Touching this will fast reverse.
: Touching this will stop the disc.
: Touching this will resume normal
play after stop or pause.
: Touch this button to fast forward
during the playback. During pause, touch
this button briefly to advance frame by
frame, or touch and hold it to play slowly.
SECOND PAGE OF DVD AUDIO
CONTROLS
Setupº: The initial setup screen ap-
pears. (See page 237.)
Select Numberº: The track or number
search screen appears. (See page 233.)
Searchº: The group search screen ap-
pears. (See page 233.)
Returnº: Touching this will display the
predetermined scene and start playing
from there.
Prev. Stillº: Touch this button to reverse
the still pictures. (See page 235.)
Next Stillº: Touch this button to forward
the still pictures. (See page 235.)
Subtitleº: The subtitle changing screen
appears. (See page 235.)
Angleº: The angle selection screen ap-
pears. (See page 237.)
Selecting a menu item
Enter the menu item using ,
,  and
 buttons and touch Enterº.
The changer starts playing video for that
menu item. (For details, see the manual
that comes with the DVD video disc pro-
vided separately.)
Each time you touch Move Buttonsº, the
controls on the screen move upward and
downward.
When you touch <<OFFº, the controls
will disappear. To display them again,
touch >>ONº.
When you touch
, the previous
screen returns.

AUDIO/VIDEO SYSTEM
233 
Searching by title
DVD video only Ð
Enter the title number and touch En-
terº.
The player starts playing video for that title
number.
When you push the 
º or º button of
SEEK/TRACKº, you can select a chap-
ter.
If you enter the wrong numbers, touch
Clearº to delete the numbers.
When you touch
, the previous
screen returns.
Searching by track
DVD audio only Ð
Enter the track numbers on the search-
ing track screen and touch Enterº.
The changer starts playing video for that
title number.
You can select a track number by pushing
the 
º or º button of SEEK/
TRACKº.
If you enter the wrong numbers, touch
Clearº to delete the numbers.
Touch
, and the previous screen re-
turns.

AUDIO/VIDEO SYSTEM
234 
Searching by group
DVD audio only Ð
Enter the group number and touch En-
terº.
The selected group number will appear on
the screen.
The changer starts playing the disc from
the entered group number.
When you push the 
º or º button of
SEEK/TRACKº, you can select a track.
If you enter the wrong numbers, touch
Clearº to delete the numbers.
When you touch
, the previous
screen returns.
Selecting the bonus group
DVD audio only Ð
Enter the bonus group number on the
searching group screen and touch En-
terº.
The Enter Key Codeº screen will appear.
To enter the number of the group you want
to play, push the group number.
If you enter the wrong number, touch  to
delete the number.
Touch Enterº on the screen.
The changer starts playing the disc from
the selected bonus group number.

AUDIO/VIDEO SYSTEM
242 
Displaying operation buttons
If you touch the part where touch-screen
buttons are not located while you are
watching video on the video CD, video CD
operation buttons will appear.
>Page2º: Use this button to display the
operation buttons on the second page.
<Page1º: Use this button to display the
operation buttons on the top page.
Hide Buttonsº: Use this button to turn off
the operation buttons from the display.
If 
º appears on the display when you
touch the button, the operation is not per-
mitted.
Description of each button
BUTTONS ON TOP PAGE
Select Numberº: The track or number
search screen appears. (See page 243.)
Returnº: Touching this will display the
predetermined scene and start playing
from there.
Prev. Menuº: When you touch this button
while the disc menu is displayed, the pre-
vious page appears on the screen. If you
touch this button while the changer is play-
ing video, the previous track is searched
and played.
Next Menuº: When you touch this button
while the disc menu is displayed, the next
page appears on the display. If you touch
this button while the changer is playing vid-
eo, the next track is searched and played.
Main/Subº: A multiplex transmission
changing button. The mode changes from
Main/Sub to Main, to Sub and back to
Main/Sub by touching this button.
BUTTONS ON SECOND PAGE
: Use this button to pause the video
screen.
: Touch this button to fast reverse
during playback.
: Touch this button during pause to
resume playing.
: Touch this button to fast forward
during the playback. During pause, touch
this button briefly to advance frame by
frame, or touch and hold it to play slowly.

AUDIO/VIDEO SYSTEM
243 
Searching by track
Enter the track numbers on the search-
ing track screen and touch Enterº.
The changer starts playing video for that
title number.
You can select a track number by pushing
the 
º or º button of SEEK/
TRACKº.
If you enter the wrong numbers, touch
Clearº to delete the numbers.
Touch
, and the previous screen re-
turns.(f) If the changer malfunctions
If the changer or another unit equipped
with the changer malfunction, your audio/
video system will display following mes-
sages.
If No Discº appears on the display: It
indicates that there is no disc in the DVD
changer.
If DISC
Checkº appears on the dis-
play: It indicates that the disc dirty, dam-
aged, or it was inserted upside down.
Clean the disc or insert it correctly. If a disc
which is not playable is inserted, DISC

Checkº will also appear on the screen. For
appropriate discs for this player, see Au-
dio/video system operating hintsº on page
248.
If Region Code Errorº appears on the
display: It indicates that the DVD region
code is not set properly.
If DVD Errorº appears on the display:
The following causes are possible.There is a trouble inside the system.
Eject the disc.
The inside of the changer unit may be
too hot due to the very high ambient
temperature. Eject the disc and allow
the changer to cool down.
If NO MUSIC FILEº appears on the dis-
play: It indicates that the disc has no play-
able data.
If the malfunction is not rectified: Take
your vehicle to your dealer.
If an MP3/WMA disc contains CD-DA
files, only CD-DA files are played. If an
MP3/WMA disc contains files other than
CD-DA, only MP3/WMA files are played.