display Lexus GS350 2010 Do-It-Yourself Maintenance / LEXUS 2010 GS460 GS350 (OM30C80U) Service Manual
Page 232 of 648
232
3-1. Using the touch screen
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
Adjusting the display
Press .
Adjust the display as desired using “-” / “+” /“R” / “G”.
If you do not touch the screen for 20 seconds, the system will return to 
the previous screen.
*: Vehicles with DVD player only, displays during DVD video/audio or video 
CD playback
STEP1
STEP2
“R”“G”
“Color ”*RedGreen
“-”“+”
“Tone”*LighterDarker
“Contrast”LowerHigher
“Brightness”DarkerBrighter 
Page 233 of 648
233
3-1. Using the touch screen
3
Interior features
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
■To avoid damaging the touch screen
●Touch the screen lightly with your finger. If there is no response, remove your fin-
ger from the screen and try again.
●Remove any dirt on the screen by wiping with a soft cloth. Do not use detergent.
■When using the touch screen
●If the screen is cold, the display may be dark, or the system may seem to be 
operating slightly slower than normal.
●The screen may seem dark and hard to see when viewed through sunglasses. 
Change your angle of viewing, adjust the display on the “Display” screen or 
remove your sunglasses.
■Changing between day mode and night mode
■To turn off the display
If “Screen Off” is touched, the screen display is turned off, and guidance is by voice 
only.
When the headlights are turned on, the 
screen dims.
However, the screen can be switched to day 
mode by touching “Day Mode”.
The screen will stay in day mode when the 
headlights are turned on until “Day Mode” 
is touched again.
The switch will not be displayed if the 
instrument panel light control is set to the 
brightest level. 
Page 236 of 648
236
3-1. Using the touch screen
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
■Select language
Select the desired language.
■Change voice recognition language
The desired voice recognition language can be selected from the list.
■Automatic transition on/off
After 20 seconds of air conditioning or audio system use, the system 
will return the display to the previous screen. 
Page 237 of 648
237
3-1. Using the touch screen
3
Interior features
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
■Select keyboard layout
The keyboard layout can be changed.
“ABC” type
“QWERTY” type
■Select the unit
The measurement unit shown on the display can be changed. 
Page 238 of 648
238
3-1. Using the touch screen
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
■Delete personal data
Touch “Delete Personal Data” on the “General Settings” screen.
Touch “Delete”.
Check carefully beforehand, as 
data cannot be retrieved once 
deleted.
A confirmation screen will be displayed. Touch “Yes”.
The following personal data can be deleted or turned to their default settings:
• Radio preset stations
• Phonebook data
• Call history data
• Speed dial data
• Voice tag data
•Bluetooth
® phone data
•Volume setting
• Details setting
• Maintenance conditions
*
• Maintenance information “off” setting*
• Address book*
•Areas to avoid*
•Previous points*
• Route guidance*
• Route trace*
*
: If the navigation system is equipped
STEP1
STEP2
STEP3 
Page 241 of 648
241
3-1. Using the touch screen
3
Interior features
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
Audio settings
Touch “Audio” on the “Setup” screen.
Sound settings
Select portable player
Setting up Bluetooth
® audio
■Sound settings
Touch “Sound Settings”.
Sound/DSP settings can be changed. (P.  3 2 6 )
■Select portable player
Touch “Select Portable Player”.
A portable player can be selected 
for connection.
Where no player is registered, 
“Empty” is displayed.
When “Portable Player Info” is touched, the following screen is displayed:
STEP1
STEP2 
Page 243 of 648
243
3-1. Using the touch screen
3
Interior features
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
■Setting up Bluetooth® audio
Touch “Bluetooth
* Audio Settings”.
Register/remove Bluetooth
®
audio
Automatic connection on/off
Display passcode
Display device name
Restore default settings
*: Bluetooth is a registered trademark of Bluetooth SIG. Inc.
●Registering Bluetooth® audio
Touch “Register”.
Enter the passcode into the porta-
ble player.
A message is shown if connection 
has been successful.
If connection fails, a message will 
be displayed and connection will 
be re-attempted.
●Removing Bluetooth® audio
Touch “Remove”.
Touch the player to remove.
A confirmation screen will be dis-
played, touch “Yes” to remove the 
player.
STEP1
STEP2
STEP1
STEP2 
Page 244 of 648
244
3-1. Using the touch screen
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
●Changing the passcode
Touch “Edit”.
Enter the desired passcode.
The passcode can be between 4 and 8 characters in length, and is set 
to “0000” by default.
●Changing the device name
Touch “Edit”.
Enter the desired name.
●Restoring the default settings
Touch “Default”.
A confirmation screen will be displayed, touch “Yes” to restore 
the default settings.
■When setting the connection method to “From Portable Player”
●Connection methods differ depending on the audio player. Consult your audio 
player’s manual.
●Automatic connection cannot be set to “On”.
■When using Bluetooth® audio
A confirmation screen will be displayed if an attempt is made to remove a portable 
player.
Touch “Yes” to disconnect and remove the player.
STEP1
STEP2
STEP1
STEP2
STEP1
STEP2 
Page 245 of 648
245
3-1. Using the touch screen
3
Interior features
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
Vehicle settings
Touch “Vehicle” on the “Setup” screen.
Refer to “Navigation System 
Owner’s Manual”.
Setting up intuitive parking 
assist
●Setting up intuitive parking assist
Alert volume setting
Display setting
“Static”: Displays when the sen-
sors detect an obsta-
cle.
“Dynamic”: Displays if maneuvers 
are required to avoid 
an obstacle. 
“Off”: Does not display the 
intuitive parking assist 
display.
■Intuitive parking assist display
When an obstacle is detected while the rear view monitor system is in use, the 
warning indicator will appear in the top right of the screen even if the display setting 
has been set to “Off”. 
Page 246 of 648
246
GS_G_U (OM30C80U)
June 29, 2011 10:30 am
3-2. Using the air conditioning system and defogger
Automatic air conditioning system 
Airflow and outlets are automatically adjusted according to the tempera-
ture setting.
Press
  to display the air conditioning operation screen.
The illustrations below are for vehicles with navigation system.
The display and button positions will differ depending on the type of the sys-
tem.
Automatic mode Driver’s side 
temperature display
Fan speed display
OffAirflow display Air conditioning operation 
screen display button
Passenger’s side 
temperature 
display
Micro dust and pollen filter Driver’s side 
temperature control Air conditioning 
ON/OFF switch
Outside air or recirculated mode
Windshield defoggerPassenger’s side 
temperature control Dual operation switch