display Lexus GX470 2005 Scheduled Maintenance Guide / LEXUS 2005 GX470 (OM60B11U) Repair Manual

AUDIO
359
(q) Setting the display mode
Each time you push the ªDisplay Modeº switch on the
ªSetup M
enu 2º screen, the display mode is changed from
wide mode to auto mode. (r) Language code list
Code
Language
1001Japanese
0514English
0618French
0405German
0920Italian
0519Spanish
2608Chinese
1412Dutch
1620Portuguese
1922Swedish

AUDIO
366(s) Selecting the chapter/track
To select the chapter/track, push the ªº or ªº
(TUNE/TRACK) button on the remote control until the
number of the chapter/track you want to select appears on
the screen. (t) Using the control screen
1For DVD video2For DVD audio
When
playing a disc, push the ªDVDº button on the remote
control. The control screen will appear on the screen.
Details of the specific switches, controls and features are
described below.
ªPICTUREº switch: Push the ªPICTUREº switch to turn off the
control screen and return to the picture previously displayed.
ªRPTº switch (DVD audio only): Push the ªRPTº switch while
the track is playing. When the track ends, it will automatically
replay. To turn off the repeat feature, push this switch again.
ªRANDº sw itch (DVD audio only): Push the ªRANDº switch.
The player will play the tracks on the disc in random order. To
turn off the random feature, push this switch again.

AUDIO
367
ªSCANº switch (DVD audio only): Push the ªSCANº switch.
The player will scan all the tracks on the disc you are listening
to. To stop scanning, push this switch again. If the player
scanned all the tracks on the disc, it will stop scanning.
ª
º and ªº switches:
Push and hold the ªº or
ª
º switch to fast forward or reverse a disc. When you
release the switch, the DVD player will resume playing. (u) Error messages
If the player malfunctions, your audio system will display one
of the three following error messages.
If ªDISC CHECKº appears on the screen:
It indicates that the
disc is dirty, damaged or it was inserted upside down. Clean
the disc or insert it correctly.
If ªREGION CODE ERRORº appears on the screen: It
indicates that the DVD region code is not set properly.
If ªDVD ERRORº appears on the screen: There is a problem
inside the player. Eject the disc. Set the disc again.
If the malfunction still exists, take your vehicle to your Lexus
dealer.

AUDIO
370(d) Changing menu page or track (video CD only)
Push the ªD.
Menu Nextº or ªD. Menu Prev.º switch while
the disc menu is displayed. The next or previous page will
appear on the screen.
Push the ªD. Menu Nextº or ªD. Menu Prev.º switch while
the player is playing video. The next or previous track will
be searched and played. (e) Changing a multiplex transmission (video CD only)Push the ªMain/Subº switch to change a multiplex
transmission. The mode changes from Main/Sub to Main
to Sub and back to Main/Sub by pushing the ªMain/Subº
switch.

AUDIO
372When
playing a disc, push the ªDVDº button on the remote
control. The control screen will appear on the screen.
CD text only Ð The CD title and track title will appear on the
screen when pushing the ªDVDº button.
Details of the specific switches, controls and features are
described below.
ªPICTUREº switch (video CD only): Push the ªPICTUREº
switch to turn off the control screen and return to the picture
previously displayed.
ªRPTº switch (audio CD and CD text): Push the ªRPTº
switch while the track is playing. When the track ends, it will
automatically replay. To turn off the repeat feature, push this
switch again.
ªRANDº switch (audio CD and CD text): Push the ªRANDº
switch. The player will play the tracks on the CD in random
order. To turn off the random feature, push this switch again.
ªSCANº switch (audio CD and CD text): Push the ªSCANº
switch. The player will scan all the tracks on the CD. To stop
scanning, push this switch again. When the player has
scanned all the tracks on the CD, it will stop scanning.
ª
º and ªº switches: Push the ªº or ªº switch
to fast forward or reverse the disc. When you push the switch
again, the DVD player will resume playing. (h) Error messages
If the player malfunctions, your audio system will display one
of the three following error messages.
If ªDISC CHECKº appears on the screen:
It indicates that the
disc is dirty, damaged or it was inserted upside down. Clean
the disc or insert it correctly.
If ªREGION CODE ERRORº appears on the screen: It
indicates that the DVD region code is not set properly.
If ªDVD ERRORº appears on the screen: There is a problem
inside the player. Eject the disc. Set the disc again.
If the malfunction still exists, take your vehicle to your Lexus
dealer.

AUDIO
373
Screen adjustment
You can adjust the color, contrast, tone and brightness of
the screen.
Push the ªDISPLAYº button on the remote control (1)
and then the ªDisplayº screen (2) will appear.
The screen may turn purple to deflect the sunlight. This is not
a malfunction.
Each time you push the ª+º or ª±º switch, you can adjust \
the
color, contrast, tone and brightness of the screen.
ª+º or ªGREENºª±º or ªREDº
COLORStrengthens the
green colorStrengthens the
red color
CONTRASTStrengthens the
contrastWeakens the
contrast
TONEStrengthens the
toneWeakens the tone
BRIGHTNESSBrightensDarkens

STARTING AND DRIVING
403
AUTOMATIC TRANSMISSION
Your automatic transmission has a shift lock system to
minimize the possibility of incorrect operation. This
means you can only shift out of ªPº position when the
brake pedal is depressed with the ignition switch in ªONº
position. ()
31PY039

The shift position is displayed beside the selector lever
and on the instrument cluster.
P: Parking, engine starting and key removal position
R: Reverse position
N: Neutral position
D: Normal driving position (Shifting into overdrive possible)
4: Position for engine braking (Shifting into overdrive not
possible)
When the cruise control is being used, even if you
downshift from ªDº to ª4º, engine braking will not be
enabled because the cru ise control is not cancelled. For
the operation to decrease the vehicle speed, see page
421.
3, 2: Position for more powerful engine braking
L: Position for maximum engine braking

STARTING AND DRIVING
415
REAR VIEW MONITOR SYSTEM
The rear view monitor system assists the driver by
displaying an image of the rear of the vehicle while
backing up. The displayed image on the screen is a
horizontally reversed mirror image of the inside rear view
mirror.
To display the rear view image on the screen, place the
selector lever in the ªRº position when the ignition switch
is in the ªONº position.
If you move the selector lever out of the ªRº position, the screen
returns to the previous screen. Operating another function of
the navigation system will display another screen.
The rear view monitor system is a supplemental device
intended to assist back up. When backing up, be sure to check
behind and all around the vehicle visually.
CAUTION
 Never depend on the rear view monitor system
entirely when backing up. Always make sure your
intended path is clear.
Use caution just as you would when backing up any
vehicle.
 Never back up while looking only at the screen. The
image on the screen is different from actual
conditions. Depicted distances between objects and
flat surfaces will differ from actual distances. If you
back up w hile looking only at the screen, you may hit
a vehicle, a person or an object. When backing up, be
sure to check behind and all around the vehicle
visually and with mirrors before proceeding.
 Do not use the system when the back door is not
completely closed.
 If the back of the vehicle is hit, the position and
mounting angle of the camera may change. Be sure
to have the camera's position and mounting angle
checked at your Lexus dealer.
 If the temperature changes rapidly, such as when hot
water is poured on the vehicle in cold weather, the
system may not operate normally.

STARTING AND DRIVING
416
If the camera lens becomes dirty, it cannot transmit
a clear image. If water droplets, snow, or mud adhere
to the lens, rinse with water and wipe with a soft cloth.
If the lens is extremely dirty, wash it with a mild
cleanser and rinse.
 The displayed image may become darker and moving
images may be slightly distorted when the system is
cold. When backing up, be sure to check behind and
all around the vehicle visually and with mirror before
proceeding.AREA DISPLAYED ON SCREEN
Image is displayed approximately level on screen.

STARTING AND DRIVING
417
31PY046

Corners of bumper
The area covered by the camera is limited. Objects
which are close to either corner of the bumper or under
the bumper cannot be seen on the screen.
 The area displayed on the screen may vary according
to vehicle orientation or road conditions.
If the above screen appears on the display, the back door is
open. W hen backing up the vehicle, make sure the back door
is securely closed.