Lexus IS220d 2012 Navigation manual

344
1. LEXUS PARKING ASSIST MONITOR
ISF_IS_ISC_Navi_EE
INFORMATION
The area displayed on the screen may
vary according to vehicle orientation
conditions.
Objects which are close to either cor-
ner of the bumper or under the
bumper cannot be displayed.
The camera uses a special lens. The
distance of the image that appears on
the screen differs from the actual dis-
tance.
Items which are located higher than
the camera may not be displayed on
the monitor.
If your vehicle is equipped with a
backlit number plate, it may interfere
with the display.
THE CAMERA
The camera for the parking assist
monitor is located as shown in the il-
lustration.
USING THE CAMERA
If the camera lens becomes dirty, it
cannot transmit a clear image. If wa-
ter droplets, snow or mud adhere to
the lens, rinse with water and wipe
with a soft cloth. If the lens is ex-
tremely dirty, wash it with a mild
cleanser and rinse.

345
1. LEXUS PARKING ASSIST MONITOR
10
PERIPHERAL MONITORING SYSTEM
ISF_IS_ISC_Navi_EE
The distance guide lines and the vehicle
width extension guide lines may not
actually be parallel with the dividing
lines of the parking space, even when
they appear to be so. Be sure to check
visually.
The distances between the vehicle
width extension guide lines and the left
and right dividing lines of the parking
space may not be equal, even when
they appear to be so. Be sure to check
visually.
The distance guide lines give a distance
guide for flat road surfaces. In any of
the following situations, there is a mar-
gin of error between the guide lines on
the screen and the actual distance /
course on the road.
NOTICE
The parking assist monitor may not
operate properly in the following
cases, or if the precautions described
below are not followed.
• If the back of the vehicle is hit, the
position and mounting angle of the
camera may change.
• As the camera has a water proof
construction, do not detach, disas-
semble or modify it. This may cause
incorrect operation.
• Do not strongly rub the camera lens.
If the camera lens is scratched, it
cannot transmit a clear image.
• Do not allow organic solvent, car
wax, window cleaner or glass coat
to adhere to the camera. If this hap-
pens, wipe it off as soon as possible.
• If the temperature changes rapidly,
such as when hot water is poured on
the vehicle in cold weather, the sys-
tem may not operate normally.
• When washing the vehicle, do not
apply intensive bursts of water to the
camera or camera area. Doing so
may result in the camera malfunc-
tioning.
Do not expose the camera to strong
impact as this could cause a malfunc-
tion. If this happens, have the vehicle
inspected by any authorized Lexus
dealer or repairer, or another duly
qualified and equipped professional
as soon as possible.
DIFFERENCES BETWEEN
THE SCREEN AND THE
ACTUAL ROAD

346
1. LEXUS PARKING ASSIST MONITOR
ISF_IS_ISC_Navi_EE
WHEN THE GROUND
BEHIND THE VEHICLE
SLOPES UP SHARPLY
The distance guide lines will appear
to be closer to the vehicle than the ac-
tual distance. Because of this, objects
will appear to be farther away than
they actually are. In the same way,
there will be a margin of error be-
tween the guidelines and the actual
distance/course on the road.WHEN THE GROUND
BEHIND THE VEHICLE
SLOPES DOWN SHARPLY
The distance guide lines will appear
to be further from the vehicle than
the actual distance. Because of this,
objects will appear to be closer than
they actually are. In the same way,
there will be a margin of error be-
tween the guidelines and the actual
distance/course on the road.

347
1. LEXUS PARKING ASSIST MONITOR
10
PERIPHERAL MONITORING SYSTEM
ISF_IS_ISC_Navi_EEEstimated course lines
WHEN ANY PART OF THE
VEHICLE SAGS
When any part of the vehicle sags
due to the number of passengers or
the distribution of the load, there is a
margin of error between the guide
lines on the screen and the actual dis-
tance/course on the road.
WHEN APPROACHING
THREE-DIMENSIONAL
OBJECTS
The estimated course lines target a
flat surfaced objects (such as the
road). It is not possible to determine
the position of three-dimensional ob-
jects (such as vehicles) using the es-
timated course lines and distance
guide lines. When approaching a
three-dimensional object that ex-
tends outward (such as the flatbed of
a truck), be careful of the following.
A margin of error
ESTIMATED COURSE LINES
Visually check the surroundings and
the area behind the vehicle. In the
case shown below, the truck appears
to be outside of the estimated course
lines and the vehicle does not look as
if it hits the truck. However, the rear
body of the truck may actually cross
over the estimated course lines. In re-
ality if you back up as guided by the
estimated course lines, the vehicle
may hit the truck.

348
1. LEXUS PARKING ASSIST MONITOR
ISF_IS_ISC_Navi_EE
DISTANCE GUIDE LINES
Visually check the surroundings and
the area behind the vehicle. On the
screen, it appears that a truck is park-
ing at point B. However, in reality if
you back up to point A, you will hit
the truck. On the screen, it appears
that A is closest and C is furthest
away. However, in reality, the dis-
tance to A and C is the same, and B
is farther than A and C.
Positions of A, B and C
C
A B
C
AB

349
1. LEXUS PARKING ASSIST MONITOR
10
PERIPHERAL MONITORING SYSTEM
ISF_IS_ISC_Navi_EE
6. THINGS YOU
SHOULD KNOW

350
1. LEXUS PARKING ASSIST MONITOR
ISF_IS_ISC_Navi_EE
If you notice any of the following symptoms, refer to the likely cause and the
solution, and re-check.
If the symptom is not resolved by the solution, have the vehicle inspected by
any authorized Lexus dealer or repairer, or another duly qualified and equipped
professional.
IF YOU THINK SOMETHING IS WRONG
SymptomLikely causeSolution
The image is difficult to seeThe vehicle is in a dark
area
The temperature around
the lens is either high or
low
The outside temperature
is low
There are water droplets
on the camera
It is raining or humid
Foreign matter (mud etc.)
is adhering to the camera
Sunlight or headlights are
shining directly into the
camera
The vehicle is under fluo-
rescent lights, sodium
lights, mercury lights etc.Back up while visually
checking the vehicle’s sur-
roundings. (Use the moni-
tor again once conditions
have been improved.)
The procedure for adjusting
the picture quality of the
parking assist monitor is
the same as the procedure
for adjusting the navigation
screen. (See page 35.)
The image is blurryDirt or foreign matter (such
as water droplets, snow,
mud etc.) is adhering to the
camera.Rinse the camera lens with
water and wipe it clean
with a soft cloth.
Wash with a mild soap if
the dirt is stubborn.

351
1. LEXUS PARKING ASSIST MONITOR
10
PERIPHERAL MONITORING SYSTEM
ISF_IS_ISC_Navi_EE
A vertical white streak is on
the screenWhen a bright spot (such as
sunlight reflecting off the
body of another vehicle) is
received by the camera, a
vertical streak may be left
above and below the bright
spot (smear effect).Back up while visually
checking the vehicle’s sur-
roundings. (Use the moni-
tor again once conditions
have been improved.)
The image is out of align-
mentThe camera or surrounding
area has received a strong
impact.Have the vehicle inspected
by any authorized Lexus
dealer or repairer, or anoth-
er duly qualified and
equipped professional.
The guide lines are very far
out of alignmentThe camera position is out
of alignment.Have the vehicle inspected
by any authorized Lexus
dealer or repairer, or anoth-
er duly qualified and
equipped professional.
The estimated course lines
move even though the
steering wheel is straightThere is a malfunction in
the signals being output by
the steering sensor.Have the vehicle inspected
by any authorized Lexus
dealer or repairer, or anoth-
er duly qualified and
equipped professional.
Guide lines are not dis-
playedThe trunk is open.Close the trunk.
If this does not resolve the
symptom, have the vehicle
inspected by any autho-
rized Lexus dealer or re-
pairer, or another duly
qualified and equipped pro-
fessional.
SymptomLikely causeSolution
Bright

352
1. LEXUS PARKING ASSIST MONITOR
ISF_IS_ISC_Navi_EE
“System initializing.” is
displayedThe battery has been
reinstalled.
The steering wheel has
been moved while the
battery was being rein-
stalled.
Battery power is low.
The steering sensor has
been reinstalled.
There is a malfunction in
the signals being output
by the steering sensor.Stop the vehicle, and turn
the steering wheel as far as
it will go to the left and
right.
If this does not resolve the
symptom, have the vehicle
inspected by any autho-
rized Lexus dealer or re-
pairer, or another duly
qualified and equipped pro-
fessional.
On the system initializa-
tion screen, touch “?” to
display the operating pro-
cedure.
SymptomLikely causeSolution

349
10
PERIPHERAL MONITORING SYSTEM
ISF_IS_ISC_Navi_EE
2. LEXUS PARKING ASSIST-SENSOR
1. LEXUS PARKING ASSIST-SENSOR
Front corner sensors
Rear corner sensors
Rear centre sensors
1Press “ ” or “ ” of the satellite
switch until the Lexus parking as-
sist-sensor mark appears in the
multi-information display.
IS F
IS250/IS250C
2Press the “ON/OFF” button of the
satellite switch to select “ON”.
The Lexus parking assist-sensor indica-
tor will be displayed.
The distance to obstacles measured
by the sensors is communicated via
the display and a buzzer when paral-
lel parking or maneuvering into a ga-
rage. Always check the surrounding
area when using this system.
TYPES OF SENSORS
SETTING THE LEXUS
PARKING ASSIST-SENSOR
MODE