service Lexus IS250 2014 Navigation Manual

1
IS300h/250_Navi_EE
1QUICK GUIDE11
2BASIC FUNCTION35
3NAVIGATION SYSTEM91
4AUDIO/VISUAL SYSTEM191
5SPEECH COMMAND SYSTEM273
6PERIPHERAL MONITORING SYSTEM285
7TELEPHONE323
8CONNECTED SERVICES371
INDEX393
About the following equipment, see the “Owner’s Manual”.
•Air conditioning
•Fuel consumption
•Energy monitor (IS300h)
•Vehicle customization settings
IS_Navi_EE_53C71E.book 1 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

5
IS300h/250_Navi_EE
To use this system in the safest possible
manner, follow all the safety tips shown be-
low.
This system is intended to assist in reaching
the destination and, if used properly, can do
so. The driver is solely responsible for the
safe operation of your vehicle and the safety
of your passengers.
Do not use any feature of this system to the
extent it becomes a distraction and pre-
vents safe driving. The first priority while
driving should always be the safe operation
of the vehicle. While driving, be sure to ob-
serve all traffic regulations.
Prior to the actual use of this system, learn
how to use it and become thoroughly famil-
iar with it. Read the entire manual to make
sure you understand the system. Do not al-
low other people to use this system until
they have read and understood the instruc-
tions in this manual.
For your safety, some functions may be-
come inoperable when driving. Unavailable
screen buttons are dimmed.While driving, listen to the voice instructions
as much as possible and glance at the
screen briefly and only when it is safe. How-
ever, do not totally rely on voice guidance.
Use it just for reference. If the system can-
not determine the current position correct-
ly, there is a possibility of incorrect, late, or
non-voice guidance.
The data in the system may occasionally be
incomplete. Road conditions, including
driving restrictions (no left turns, street clo-
sures, etc.) frequently change. Therefore,
before following any instructions from the
system, look to see whether the instruction
can be done safely and legally.
This system cannot warn about such things
as the safety of an area, condition of streets,
and availability of emergency services. If un-
sure about the safety of an area, do not drive
into it. Under no circumstances is this sys-
tem a substitute for the driver’s personal
judgement.
Use this system only in locations where it is
legal to do so. Some areas may have laws
prohibiting the use of navigation screens
next to the driver.
SAFETY INSTRUCTION (WITH
NAVIGATION FUNCTION)CAUTION
●Exercise extreme caution if operating the
system while driving. Insufficient attention
to the road, traffic or weather conditions
may cause an accident.
●While driving, be sure to obey the traffic
regulations and maintain awareness of
the road conditions. If a traffic sign on the
road has been changed, route guidance
may not have the updated information
such as the direction of a one way street.
IS_Navi_EE_53C71E.book 5 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

TABLE OF CONTENTS
10
IS300h/250_Navi_EE1. TELEPHONE OPERATION
(HANDS-FREE SYSTEM
FOR CELLULAR PHONES) ............... 324
QUICK REFERENCE...................................... 324
SOME BASICS ................................................... 325
CALLING ON THE Bluetooth
®
PHONE ............................................................... 329
RECEIVING ON THE Bluetooth
®
PHONE ............................................................... 337
TALKING ON THE Bluetooth
®
PHONE ............................................................... 338
Bluetooth
® PHONE MESSAGE
FUNCTION ....................................................... 341
2. SETUP ............................................................. 347
TELEPHONE SETTINGS ...............................347
CONTACT SETTINGS .................................. 353
3. WHAT TO DO IF... ..................................... 364
TROUBLESHOOTING ................................. 364
1. CONNECTED SERVICES....................... 372
CONNECTED SERVICES
OVERVIEW .......................................................372
SETTINGS REQUIRED FOR
USING THE SERVICE ................................ 375
ONLINE SEARCH ............................................ 377
IMPORTING MEMORY POINTS
AND STORED ROUTES ........................... 382
Street View ............................................................ 385
Panoramio .............................................................. 387
2. SETUP ............................................................. 389
CONNECTED SERVICE
SETTINGS.......................................................... 389
ALPHABETICAL INDEX ............................ 394
7TELEPHONE
8CONNECTED SERVICES
INDEX
IS_Navi_EE_53C71E.book 10 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

19
1. BASIC FUNCTION
IS300h/250_Navi_EE
QUICK GUIDE
1
The level of recep-
tion
Poor Excellent
•The level of reception does not always correspond with the
level displayed on the cellular phone. The level of reception
may not be displayed depending on the telephone you have.
When the cellular phone is out of the service area or in a place
inaccessible by radio waves, “No Service” is displayed.
•“Rm” is displayed when receiving in a roaming area. While
roaming, display “Rm” top-left on the icon.
•The receiving area may not be displayed depending on the
type of telephone you have.
The amount of bat-
tery charge left
Empty Full
•The amount displayed does not always correspond with the
amount displayed on the Bluetooth
® device.
The amount of battery charge left may not be displayed
depending on the type of the Bluetooth
® device connected.
This system does not have a charging function.
No.IndicatorsConditions
IS_Navi_EE_53C71E.book 19 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

54
2. NETWORK SETTINGS
IS300h/250_Navi_EE
PROFILES
This system supports the following services.
Bluetooth®
deviceSpec.FunctionRequire-
mentsRecom-
menda-
tions
Bluetooth®
Phone/
Bluetooth®
Audio
PlayerBluetooth® Specification
Registering a
Bluetooth®
deviceVe r. 2 . 0Ve r. 3 . 0
+EDR
Bluetooth®
deviceProfileFunctionRequire-
mentsRecom-
menda-
tions
Bluetooth®
Phone
HFP (Hands-Free Profile)Hands-free
systemVe r. 1 . 0Ve r. 1 . 6
OPP (Object Push Profile)Transferring the
contactsVe r. 1 .1Ve r. 1 . 2
PBAP (Phone Book Access
Profile)Ve r. 1 . 0Ve r. 1 .1
MAP (Message Access Profile)Bluetooth®
phone messageVe r. 1 . 0
DUN (Dial-up Networking
Profile)
Connected
service*Ve r. 1 .1
PAN (Personal Area
Networking)Ve r. 1 . 0
Bluetooth®
Audio
Player
A2DP (Advanced Audio
Distribution Profile)
Bluetooth®
audio systemVe r. 1 . 0Ve r. 1 . 2
AVRCP (Audio/Video Remote
Control Profile)Ve r. 1 . 0Ve r. 1 . 4
*: With navigation function
IS_Navi_EE_53C71E.book 54 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

67
2. NETWORK SETTINGS
IS300h/250_Navi_EE
BASIC FUNCTION
2
6Select “Country”.
7Select a country.
zThe previous screen will be displayed.
8Select “Provider” on the “Communica-
tion settings” screen.
9Select your mobile network provider.
10Select “OK” on the “Communication
settings” screen.
zIf “Other ” is selected for country and/or
mobile network provider, the “Detail set-
tings” screen will be displayed. (→P. 6 8 )
zThe system will automatically set the details
of the mobile network provider’s informa-
tion and perform a communication con-
nection test.
zIf the setting cannot be performed auto-
matically, the “Detail settings” screen will be
displayed. (→P. 6 8 )
11When the cellular phone has been con-
nected successfully, “Data connection
successful.” will be displayed on the
screen. The online search and importing
memory points function will be avail-
able.
zBefore performing a communication
connection test, a confirmation screen
will be displayed in accordance with the
connected service settings. (→P. 3 8 9 )
zWhen accessing Lexus portal site using a
cellular phone, your user name and pass-
word will be required. (→P. 6 8 )
IS_Navi_EE_53C71E.book 67 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

69
2. NETWORK SETTINGS
IS300h/250_Navi_EE
BASIC FUNCTION
2
4. CONNECTING TO INTERNET VIA Wi-Fi®*1
1Press the “MENU” button on the
Remote Touch.
2Select “Setup”.
3Select “Wi-Fi*2”.
4Select the items to be set.
*
2: Wi-Fi is a registered mark of the Wi-Fi
Alliance®.
Using the Wi-Fi® function, this system
can connect to the internet, which allows
the use of the connected services, traffic
information, etc.
*1: With navigation function
IS_Navi_EE_53C71E.book 69 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

82
3. OTHER SETTINGS
IS300h/250_Navi_EE
1Display the “General settings” screen.
(→P.75)
2Select “Delete personal data”.
3Select “Delete”.
4Select “Yes” when the confirmation
screen appears.
zRegistered or changed personal settings
will be deleted or returned to their default
conditions.
Fo r example:
• General settings
• Navigation settings*
• Audio settings
•Telephone settings
• Connected service settings*
*: With navigation function
DELETING PERSONAL DATA
NOTICE
●With navigation function: Make sure the
map SD card is inserted when deleting
personal data. The personal data cannot
be deleted when the map SD card is
removed. To delete the data, after insert-
ing the map SD card, turn the engine
<power> switch to ACCESSORY or
IGNITION ON <ON> mode.
IS_Navi_EE_53C71E.book 82 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

86
3. OTHER SETTINGS
IS300h/250_Navi_EE
1Display the “Vehicle settings” screen.
(→P.85)
2Select “Maintenance”.
3Select the desired item.
MAINTENANCE*
When the system is turned on, the
“Information” screen displays when it is
time to replace a part or certain compo-
nents. (→P.37)
No.Function
Select to set the condition of parts or
components.
Select to add new information items
separately from provided ones.
When set to on, the indicator will illu-
minate. The system is set to give
maintenance information with the
“Information” screen. (→P.37)
Select to cancel all conditions which
have been entered.
Select to reset the items which have
expired conditions.
Select to register/edit dealer infor-
mation. (→P.87)
INFORMATION
●
When the vehicle needs to be serviced,
the screen button colour will change to
orange.
*: With navigation function
IS_Navi_EE_53C71E.book 86 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

87
3. OTHER SETTINGS
IS300h/250_Navi_EE
BASIC FUNCTION
21Select the desired part or component
screen button.
2Set the conditions.
1Select “Dealer”.
2Select the desired item to search for the
location. (→P.116)
zThe editing dealer screen appears after
setting the location.
MAINTENANCE
INFORMATION SETTING
No.Function
Select to enter the next maintenance
date.
Select to enter the driving distance
until the next maintenance check.
Select to cancel the conditions which
have been entered.
Select to reset the conditions which
have expired.
INFORMATION
●
For scheduled maintenance information,
please refer to “Lexus Service Booklet”,
“Lexus Warranty Booklet” or “Owner’s
Manual”.
●Depending on driving or road conditions,
the actual date and distance maintenance
should be performed may differ from the
stored date and distance in the system.
DEALER SETTING
Dealer information can be registered in
the system. With dealer information reg-
istered, route guidance to the dealer is
available.
IS_Navi_EE_53C71E.book 87 ページ ２０１４年５月２９日　木曜日　午前１１時２２分