LEXUS IS250 2016 Owners Manual

222
3-2. Using the audio system
Using the radio
Setting station presets (excluding XM® Satellite Radio)
Search for desired stations by turning or pressing “∧” or
“∨” on .
Press and hold the button (from to ) the station is to
be set to until you hear a beep.
Scanning radio stations (excluding XM® Satellite Radio)
nScanning the preset radio stations
Press and hold until you hear a beep.
Preset stations will be played for 5 seconds each.
When the desired station is reached, press once again.
Seeking any traffic
program station
Station
selector Displays radio text messages
Pow e r Vo l u m e
Scans for receivable stations
Seeking the
frequencyChanging the program types
Adjusting the frequency
(AM, FM mode) or
channel (SAT mode)
AM⋅SAT/FM
mode buttons
STEP1
STEP2
STEP1
STEP2

223
3-2. Using the audio system
3

Interior features
nScanning all radio stations within range
Press .
All stations with reception will be played for 5 seconds each.
When the desired station is reached, press once again.
RDS (Radio Data System)
This feature allows your radio to receive station identification information
and program information (classical, jazz, etc.) from radio stations which
broadcast this information.
nReceiving RDS broadcasts
Press “∧” or “∨” on during FM reception.
The type of program changes each time is pressed.
lROCK
lEASYLIS (Easy listening)
lCLS/JAZZ (Classical music and Jazz)
lR & B (Rhythm and Blues)
lINFORM (Information)
lRELIGION
lMISC (Miscellaneous)
lALERT (Emergency messages)
If the system receives no RDS stations, “NO PTY” appears on the dis-
play.
Press , or “∧” or “∨” on .
The radio seeks or scans the station by the relevant program type.
STEP1
STEP2
STEP1
STEP1

224
3-2. Using the audio system
nDisplaying radio station names
Press .
nDisplaying radio text messages
Press twice.
If MSG shows in the display, a text message will be displayed.
If the text continues past the end of the display, is displayed. Press and
hold until you hear a beep.
XM® Satellite Radio (if equipped)
nReceiving XM® Satellite Radio
Press .
The display changes as follows each time is pressed.
AM → SAT1 → SAT2 → SAT3
Turn to select the desired channel in the all categories or
press “∧” or “∨” on to select the desired channel in the cur-
rent category.
nSetting XM® Satellite Radio channel presets
Select the desired channel. Press the button the channel is to be set to
(from to ), and you hear a beep.
nChanging the channel category
Press “∧” or “∨” on .
STEP1
STEP2

225
3-2. Using the audio system
3

Interior features
nScanning XM® Satellite Radio channels
lScanning channels in the current category
Press .
When the desired channel is reached, press again.
lScanning preset channels
Press and hold until you hear a beep.
When the desired channel is reached, press again.
nDisplaying text information
Press .
The display will show up to 10 characters.
The display changes as follows each time is pressed.
lCH NAME
lTITLE (SONG/PROGRAM TITLE)
lNAME (ARTIST NAME/FEATURE)
lCH NUMBER
STEP1
STEP2
STEP1
STEP2

226
3-2. Using the audio system
nWhen the battery is disconnected
Stations presets are erased.
nReception sensitivity
lMaintaining perfect radio reception at all times is difficult due to the continually
changing position of the antenna, differences in signal strength and surrounding
objects, such as trains, transmitters, etc.
lThe radio antenna is mounted inside the rear window. To maintain clear radio
reception, do not attach metallic window tinting or other metallic objects to the
antenna wire mounted inside the rear window.
nXM® Satellite Radio
An XM® Satellite Radio is a tuner designed exclusively to receive broadcasts pro-
vided under a separate subscription. Availability is limited to the 48 contiguous
states and 10 Canadian provinces.
lXM® subscriptions
For detailed information about XM® Satellite Radio or to subscribe:
U.S.A. ⎯
Visit on the web at www.xmradio.com or call 1-877-515-3987.
Canada ⎯
Visit on the web at www.xmradio.ca or call 1-877-438-9677.
lRadio ID
You will need the radio ID when activating XM® service or reporting a prob-
lem. Select “CH000” using , and the receiver's 8-character ID number
will appear.
lSatellite tuner
The tuner supports only Audio Services (Music and Talk) and the accompany-
ing Text Information of XM® Satellite Radio.

227
3-2. Using the audio system
3

Interior features
nIf the satellite radio does not operate normally
If a problem occurs with the XM® tuner, a message will appear on the display. Refer
to the table below to identify the problem, and take the suggested corrective action.
“ANTENNA”
The XM® antenna is not connected. Check whether
the XM® antenna cable is attached securely.
There is a short-circuit in the antenna or the surround-
ing antenna cable. See a Lexus certified dealer.
“UPDATING”
You have not subscribed to the XM® Satellite Radio.
The radio is being updated with the latest encryption
code. Contact the XM® Satellite Radio for subscrip-
tion information. When a contract is canceled, you can
choose the “CH000” and all free-to-air channels.
The premium channel you selected is not authorized.
Wait for about 2 seconds until the radio returns to the
previous channel or “CH001”. If it does not change
automatically, select another channel. If you want to lis-
ten to the premium channel, contact the XM® Satellite
Radio.
“NO SIGNAL”
The XM® signal is too weak at the current location.
Wait until your vehicle reaches a location with a stron-
ger signal.
“LOADING”The unit is acquiring audio or program information.
Wait until the unit has received the information.
“OFF AIR”The channel you selected is not broadcasting any pro-
gramming. Select another channel.
“-----”
There is no song/program title or artist name/feature
associated with the channel at that time. No action
needed.

228
3-2. Using the audio system
Contact the XM® Listener Care Center at 1-877-515-3987 (U.S.A.) or 1-877-
438-9677 (Canada).
nCertifications for the radio tuner
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encour-
aged to try to correct the interference by trying one or more of the following:
lReorienting or relocate the receiving antenna.
lIncreasing the separation between the equipment and receiver.
lConnecting the equipment into an outlet on a circuit different from that to which
the receiver is connected.
lConsulting the dealer or an experienced radio/TV technician for help.
“---”
The channel you selected is no longer available. Wait
for about 2 seconds until the radio returns to the previ-
ous channel or “CH001”. If it does not change auto-
matically, select another channel.

229
3-2. Using the audio system
3

Interior features
Using the CD player
Loading CDs
nLoading a CD
Push .
“WAIT” is shown on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
nLoading multiple CDs
Press and hold until you hear a beep.
“WAIT” is shown on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
The indicator on the slot turns to amber when the CD is inserted.
Po w e r Vo l u m e
Track selection
CD ejectPlayback
Search playbackCD load
CD selection
Random playback
Repeat playDisplays text
message
STEP1
STEP2
STEP1
STEP2

230
3-2. Using the audio system
Insert the next CD when the indicator on the slot turns from
amber to green again.
Repeat the procedure for the remaining CDs.
To stop the operation, press .
Ejecting CDs
nEjecting a CD
To select the CD to be ejected,
press “∧” or “∨” on .
The number of the CD selected is
shown on the display.
Press and remove the CD.
nEjecting all the CDs
Press and hold until you hear a beep, and then remove the CDs.
Selecting, fast-forwarding, and scanning tracks
nSelecting a track
Press “∧” to move up and “∨” to move down using until the
desired track number is displayed.
To fast forward or reverse, press and hold “∧” or “∨” on .
nScanning a CD
Press .
The first ten seconds of each track will be played.
Press again when the desired track is reached.
STEP3
STEP1
STEP2
STEP1
STEP2

231
3-2. Using the audio system
3

Interior features
Selecting a CD
nTo select a CD to play
To select the desired CD, press “∧” or “∨” on .
nTo scan loaded CDs
Press and hold until you hear a beep.
The first ten seconds of the first track on each CD will be played.
Press again when the desired CD is reached.
Random playback
nCurrent CD
Press (RAND).
Songs are played in random order until random playback is canceled.
nAll CDs
Press and hold (RAND) until you hear a beep.
Tracks on all loaded CDs are played in a random order until
(RAND) is pressed once more.
Repeat play
nTo repeat a track
Press (RPT).
nTo repeat all of the tracks on a CD
Press and hold (RPT) until you hear a beep.
Switching the display
Press .
Each time is pressed, the display changes in the order of Track no./
Elapsed time → CD title → Track name.
STEP1
STEP2