display LEXUS IS250 2016 Owner's Guide

212
3-1. Using the air conditioning system and defogger
nChanging the air outlets
Press .
The air outlets switch each time the is pressed. The air flow shown
on the display indicates the following.
Upper body
Upper body and feet
Feet

222
3-2. Using the audio system
Using the radio
Setting station presets (excluding XM® Satellite Radio)
Search for desired stations by turning or pressing “∧” or
“∨” on .
Press and hold the button (from to ) the station is to
be set to until you hear a beep.
Scanning radio stations (excluding XM® Satellite Radio)
nScanning the preset radio stations
Press and hold until you hear a beep.
Preset stations will be played for 5 seconds each.
When the desired station is reached, press once again.
Seeking any traffic
program station
Station
selector Displays radio text messages
Pow e r Vo l u m e
Scans for receivable stations
Seeking the
frequencyChanging the program types
Adjusting the frequency
(AM, FM mode) or
channel (SAT mode)
AM⋅SAT/FM
mode buttons
STEP1
STEP2
STEP1
STEP2

224
3-2. Using the audio system
nDisplaying radio station names
Press .
nDisplaying radio text messages
Press twice.
If MSG shows in the display, a text message will be displayed.
If the text continues past the end of the display, is displayed. Press and
hold until you hear a beep.
XM® Satellite Radio (if equipped)
nReceiving XM® Satellite Radio
Press .
The display changes as follows each time is pressed.
AM → SAT1 → SAT2 → SAT3
Turn to select the desired channel in the all categories or
press “∧” or “∨” on to select the desired channel in the cur-
rent category.
nSetting XM® Satellite Radio channel presets
Select the desired channel. Press the button the channel is to be set to
(from to ), and you hear a beep.
nChanging the channel category
Press “∧” or “∨” on .
STEP1
STEP2

225
3-2. Using the audio system
3

Interior features
nScanning XM® Satellite Radio channels
lScanning channels in the current category
Press .
When the desired channel is reached, press again.
lScanning preset channels
Press and hold until you hear a beep.
When the desired channel is reached, press again.
nDisplaying text information
Press .
The display will show up to 10 characters.
The display changes as follows each time is pressed.
lCH NAME
lTITLE (SONG/PROGRAM TITLE)
lNAME (ARTIST NAME/FEATURE)
lCH NUMBER
STEP1
STEP2
STEP1
STEP2

227
3-2. Using the audio system
3

Interior features
nIf the satellite radio does not operate normally
If a problem occurs with the XM® tuner, a message will appear on the display. Refer
to the table below to identify the problem, and take the suggested corrective action.
“ANTENNA”
The XM® antenna is not connected. Check whether
the XM® antenna cable is attached securely.
There is a short-circuit in the antenna or the surround-
ing antenna cable. See a Lexus certified dealer.
“UPDATING”
You have not subscribed to the XM® Satellite Radio.
The radio is being updated with the latest encryption
code. Contact the XM® Satellite Radio for subscrip-
tion information. When a contract is canceled, you can
choose the “CH000” and all free-to-air channels.
The premium channel you selected is not authorized.
Wait for about 2 seconds until the radio returns to the
previous channel or “CH001”. If it does not change
automatically, select another channel. If you want to lis-
ten to the premium channel, contact the XM® Satellite
Radio.
“NO SIGNAL”
The XM® signal is too weak at the current location.
Wait until your vehicle reaches a location with a stron-
ger signal.
“LOADING”The unit is acquiring audio or program information.
Wait until the unit has received the information.
“OFF AIR”The channel you selected is not broadcasting any pro-
gramming. Select another channel.
“-----”
There is no song/program title or artist name/feature
associated with the channel at that time. No action
needed.

229
3-2. Using the audio system
3

Interior features
Using the CD player
Loading CDs
nLoading a CD
Push .
“WAIT” is shown on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
nLoading multiple CDs
Press and hold until you hear a beep.
“WAIT” is shown on the display.
Insert a CD when the indicator on the slot turns from amber to
green.
The display changes from “WAIT” to “LOAD”.
The indicator on the slot turns to amber when the CD is inserted.
Po w e r Vo l u m e
Track selection
CD ejectPlayback
Search playbackCD load
CD selection
Random playback
Repeat playDisplays text
message
STEP1
STEP2
STEP1
STEP2

230
3-2. Using the audio system
Insert the next CD when the indicator on the slot turns from
amber to green again.
Repeat the procedure for the remaining CDs.
To stop the operation, press .
Ejecting CDs
nEjecting a CD
To select the CD to be ejected,
press “∧” or “∨” on .
The number of the CD selected is
shown on the display.
Press and remove the CD.
nEjecting all the CDs
Press and hold until you hear a beep, and then remove the CDs.
Selecting, fast-forwarding, and scanning tracks
nSelecting a track
Press “∧” to move up and “∨” to move down using until the
desired track number is displayed.
To fast forward or reverse, press and hold “∧” or “∨” on .
nScanning a CD
Press .
The first ten seconds of each track will be played.
Press again when the desired track is reached.
STEP3
STEP1
STEP2
STEP1
STEP2

231
3-2. Using the audio system
3

Interior features
Selecting a CD
nTo select a CD to play
To select the desired CD, press “∧” or “∨” on .
nTo scan loaded CDs
Press and hold until you hear a beep.
The first ten seconds of the first track on each CD will be played.
Press again when the desired CD is reached.
Random playback
nCurrent CD
Press (RAND).
Songs are played in random order until random playback is canceled.
nAll CDs
Press and hold (RAND) until you hear a beep.
Tracks on all loaded CDs are played in a random order until
(RAND) is pressed once more.
Repeat play
nTo repeat a track
Press (RPT).
nTo repeat all of the tracks on a CD
Press and hold (RPT) until you hear a beep.
Switching the display
Press .
Each time is pressed, the display changes in the order of Track no./
Elapsed time → CD title → Track name.
STEP1
STEP2

232
3-2. Using the audio system
nDisplay
Up to 12 characters can be displayed at a time.
If there are 13 characters or more, pressing and holding for 1 second or
more will display the remaining characters.
A maximum of 24 characters can be displayed.
If is pressed for 1 second or more again or has not been pressed for 6 sec-
onds or more, the display will return to the first 12 characters.
Depending on the contents recorded, the characters may not be displayed prop-
erly or may not be displayed at all.
nCanceling random, repeat and scan playback
Press (RAND), (RPT), or again.
nWhen “LOAD”, “ERROR” or “WAIT” is shown on the display
“LOAD”: This indicates that the CD player has completed loading the CD.
“ERROR”: Make sure the label of the displayed disc is facing up, and then reinsert it
in the player.
“WAIT”: Operation is stopped due to a high temperature inside the player. Wait
for a while and then press . Contact your Lexus dealer if the CD
still cannot be played back.
nDiscs that can be used
Discs with the marks shown below can be used.
Playback may not be possible depending on recording format or disc features, or
due to scratches, dirt or deterioration.
CDs with copy-protection features may not play correctly.

235
3-2. Using the audio system
3

Interior features
Playing back MP3 and WMA discs
Loading, ejecting and selecting MP3 and WMA discs
→P. 22 9
Selecting a folder
nSelecting folders one at a time
Press (∧) or (∨) to select the desired folder.
nSelecting the desired folder by cueing the first file of each folder
Press and hold until you hear a beep. When the desired folder is
reached, press once again.
nReturning to the first folder
Press and hold (∨) until you hear a beep.
Po w e r Vo l u m e
CD eject
Playback
Search playbackCD load
CD selection
File selection
Random playback
Repeat play
Displays text message
Folder selection
File
selection