fuel filter Lexus IS250C 2012 Instrument cluster / LEXUS 2012 IS250C,IS350C OWNERS MANUAL (OM53A62U)
Page 564 of 632
564
6-1. Specifications
Lubrication system
*: The engine oil capacity is a reference quantity to be used when exchanging.Warm up and turn off the engine, wait more than 5 minutes, and check the oil
level on the dipstick.
■ Engine oil selection
IS250C
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to satisfy the follow-
ing grade and viscosity.
Oil grade: ILSAC multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good
starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced with
SAE 0W-20 at the next oil
change.
Oil capacity
(Drain and refill
reference*)
without filter
with filter
6.2 qt. (5.9 L, 5.2 Imp. qt.)
6.6 qt. (6.3 L, 5.5 Imp. qt.)
Outside temperature
Page 632 of 632
632
GAS STATION INFORMATION
Auxiliary catch leverP. 4 1 9Trunk openerP. 5 1Fuel filler door P. 9 5
Hood lock release lever P. 4 1 9Fuel filler door openerP. 9 5Tire inflation pressureP. 5 7 2
Fuel tank capacity
(Reference)17.2 gal. (65 L, 14.3 Imp. gal.)
Fuel typeUnleaded gasoline only P. 96, 563
Cold tire inflation
pressureP. 5 7 2
Engine oil capacity
(Drain and refill
reference)qt. (L, Imp. qt.)
Without filter 6.2 (5.9, 5.2)
With filter 6.6 (6.3, 5.5)
Engine oil typeP. 564