CD player Lexus IS300 2003 Basic Functions / LEXUS 2003 IS300 (OM53439U) User Guide

Page 228 of 389

AUDIO
215
(d) Searching for a desired track
SV22023
Push the ºSCANº button briefly.
ºSCANº will appear on the display. The compact disc player
will play the next track for 10 seconds, then scan again. To
select a track, push the ºSCANº button a second time. If the
player reaches the end of the disc, it will continue scanning at
track 1.
After all the tracks are scanned in one pass, normal play
resumes.
(e) Searching for a desired disc (type A only)
SV22024
Push the ºSCANº button until you hear a beep.
With ºD
SCANº on the display, the program at the beginning
of each disc will be played for 10 seconds. To continue
listening to the program of your choice, push the ºSCANº
button a second time.
After all the discs in the player are scanned in one pass, the
scan function is cancelled.
2003 IS300 from Aug. '02 Prod. (OM53439U)

Page 229 of 389

AUDIO
216(f) Selecting a desired track
SV22065
ºTRACKº button: Use for direct access to a desired track.
Push either side of the ºTRACKº button several times until the
desired track number appears on the display. As you release
the button, the player will start playing the selected track from
the beginning.
ºFast forwardº button.
Push the º
º button and hold it to fast forward the disc.
When you release the button, the compact disc player will
resume playing from that position.
ºReverseº button.
Push the º º button and hold it to reverse the disc. When
you release the button, the compact disc player will resume
playing. (g) Other compact disc player functions
SV22036
ºRPTº button
: Use it for automatic repeat of the track you are
currently listening to.
In order to repeat the track you are currently listening to, push
the button briefly while the track is playing. ºRPTº will appear
on the display. When the track is finished, the player will
automatically go back to the beginning of the track and play the
track again. To cancel it, push the button briefly once again.
In order to repeat the disc you are currently listening to, push
the button until you hear a beep. ºD
RPTº will appear on the
display. When the last track of the disc you are listening to is
finished, the player will automatically go back to the first track
on the disc and play the disc again. To cancel it, push the
button once again.
2003 IS300 from Aug. '02 Prod. (OM53439U)

Page 230 of 389

AUDIO
217
ºRANDº button:
Use it for automatic track selection and play
by the system.
When the button is pushed briefly, the system selects a track
in the disc which are set and plays it and ºRANDº will appear
on the display. To cancel it, push the button briefly once again.
When the button is pushed until you hear a beep, the system
selects a track in the all discs which are set and plays it and
ºD
RANDº will appear on the display. To cancel it, push the
button once again.
When a tr ack is skipped or the system is inoperative, push the
button to reset. (h) If the player malfunctions
If the player or another unit equipped with the player
malfunctions, your audio system will display one of the four
following error messages.
If ºERR 1º appears on the display:
It indicates that the disc
is dirty, damaged, or it was inserted up±side down. Clean the
disc or insert it correctly.
If ºERR 3º or ºERR 4º appears on the display: It indicates
there is a trouble inside the system. Eject the disc.
If the malfunction is not rectified: Take your vehicle to your
Lexus dealer.
2003 IS300 from Aug. '02 Prod. (OM53439U)

Page 232 of 389

AUDIO
219
AM
Fading
± AM broadcasts are reflected by the upper
atmosphere ± especially at night. These reflected signals can
interfere with those received directly from the radio station,
causing the radio station to sound alternately strong and weak.
Station interference ± When a reflected signal and a signal
received directly from a radio station are very nearly the same
frequency, they can interfere with each other, making it dif ficult
to hear the broadcast.
Static ± AM is easily affected by external sources of electrical
noise, such as high tension power lines, lightening, or electrical
motors. This results in static. Caring for your cassette player and tapes
For the best performance for your cassette player and tapes:
Clean the tape head and other parts regularly.

A dirty tape head or tape path can decrease sound quality
and tangle your cassette tapes. The easiest way to clean
them is by using a cleaning tape. (A wet type is
recommended.)
Use high±quality cassettes:
 Low±quality cassette tapes can cause many problems,
including poor sound, inconsistent playing speed, and
constant auto±reversing. They can also get stuck or
tangled in the cassette player.
 Do not use a cassette if it has been damaged or tangled or
if its label is peeling off.
 Do not leave a cassette in the player if you are not listening
to it, especially if it is hot outside.
 Store cassettes in their cases and out of direct sunlight.
 Avoid using cassettes with a total playing time longer than
100 minutes (50 minutes per side). The tape used in these
cassettes is thin and could get stuck or tangled in the
cassette player.
2003 IS300 from Aug. '02 Prod. (OM53439U)

Page 233 of 389

AUDIO
220Caring for your compact disc player and discs

Your compact disc player is intended for use with 12 cm (4.7
in.) discs only.
 Extremely high temperature can keep your compact disc
player from working. On hot days, use air conditioning to
cool the vehicle interior before you listen to a disc.
 Bumpy roads or other vibrations may make your compact
disc player skip.
 If moisture gets into your compact disc player, you may not
hear any sound even though your compact disc player
appears to be working. Eject all discs from the player and
wait until the player dries.
CAUTION
Compact disc players use an invisible laser beam which
could cause hazardous radiation exposure if directed
outside the unit. Be sure to operate the player correctly.
20L037
Use only compact discs marked as shown above. The
following products may not be playable on your compact
disc player.
Copy±protected CD
CD±R (CD±Recordable)
CD±RW (CD±Re±writable)
CD±ROM
2003 IS300 from Aug. '02 Prod. (OM53439U)

Page 234 of 389

AUDIO
221
20E424
Special shaped discs
20E425
Low quality discs
20E423
Labeled discs
NOTICE
To prevent damage to the player or changer, do not usespecial shaped, low quality or labeled discs such asthose shown in the illustrations.
2003 IS300 from Aug. '02 Prod. (OM53439U)

Page 235 of 389

AUDIO
222
20L038
Correct Wrong
Handle compact discs carefully, especially when you set
them into the player. Hold them on the edge and do not bend
them. A void getting fingerprints on them, particularly on the
shiny side.
 Dirt, scrapes, warping, pin holes, or other disc damage
could cause the player to skip or to repeat a section of a
track. (To see a pin hole, hold the disc up to the light.)
20L039
To clean a compact disc: Wipe it with a soft, lint±free cloth
that has been dampened with water. Wipe in a straight line from
the center to the edge of the disc (not in a circle). Do not use
a conventional record cleaner or anti±static device.
2003 IS300 from Aug. '02 Prod. (OM53439U)

Page:   < prev 1-10 11-20