Lexus IS300 2004 Electrical Components / LEXUS 2004 IS300 OWNER'S MANUAL (OM53461U)

OCCUPANT RESTRAINT SYSTEMS
156
Using a top strap (Sedan)
SV16047
Follow the next procedure for a child restraint system that
requires the use of a top strap.
SV16072

Anchor brackets
Use the anchor bracket on the filler panel behind the rear seat
to attach the top strap.
Anchor brackets are installed for each rear seating position.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
157
SV16062

Center seat position
1. Lower the head restraint.
2. Fix the child restraint system with the seat belt.
3. Latch the hook onto the anchor bracket and tighten the
top strap.
For instructions to install the child restraint system, see ºT ypes
of child restraint systemº on page 143.
CAUTION
Make sure the top strap is securely latched, and check
that the child restraint system is secure by pushing and
pulling it in different directions. Follow all the
installation instructions provided by its manufacturer.
SV16118

Side seat position
1. Remove the head restraint.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
158
SV16153a
2. Fix the child restraint system with the seat belt.
Latch the hook onto the anchor bracket and tighten the
top strap.
For instructions to install the child restraint system, see ºChild
restraint systemº on page 141.
CAUTION
Make sure the top strap is securely latched, and check
that the child restraint system is securely by pushing
and pulling it in different directions. Follow all the
installation instructions provided by its manufacturer.
SV16119
3. Replace the head restraint.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
159
Installation with child restraint lower
anchorages
SV16100
The lower anchorages for the child restraint system
interfaced with the FMVSS225 specification are installed
in the rear seat.
The anchorages are installed in the clearance between the
seat cushion and seatback of both outside rear seats.
Child restraint system interfaced with the FMVSS225
specification can be fixed with these anchorages. In this case,
it is not necessary to fix the child restraint system with a seat
belt on the vehicle.SV16136b
Canada only

Type A
03 07.09

OCCUPANT RESTRAINT SYSTEMS
160
SV16137b
Canada only

Type B
For owners in Canada
The symbol on a child restraint system indicates the presence
of a lower connector system.
CHILD RESTRAINT SYSTEM INSTALLATION
Type A:
1. Widen the clearance between the seat cushion and
seatback a little and confirm the position of the lower
anchorages below the tag in the seatback.
2. Latch the hooks of lower straps onto the anchorages
and tighten the lower straps.
Type B:
1. Widen the clearance between the seat cushion and
seatback a little and confirm the position of the lower
anchorages below the tag in the seatback.
2. Latch the buckles onto the anchorages.
If your child restraint system has a top strap, it should be
anchored. (For the installation of the top strap, see ºUsing a top
strapº on page 156 in this Section.)
For the installation details, refer to the instruction manual
equipped with each product.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
161
CAUTION
When using the lower anchorages for the child
restraint system, be sure that there are no irregular
objects around the anchorages or that the seat belt is
not caught.
 Push and pull the child restraint system in different
directions to be sure it is secure. Follow all the
installation instructions provided by its
manufacturer.
 Do not install a child restraint system on the rear seat
if it interferes with the lock mechanism of the front
seats. This can cause death or severe injury to the
child and front passenger in case of sudden braking
or a collision.
Using a top strap (SportCross: Type A)
SV16109
Follow the next procedure for a child restraint system that
requires the use of a top strap.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
162
SV16144
CAUTION
When using the top strap, be sure to run it through
between the seatback and the luggage cover by
hooking it on the anchor. Hooking the top strap on the
anchor by running it through over the luggage cover
may cause death or serious injury to a child due to
abnormal moving of the child restraint system in case
of sudden braking or a collision.
SV16160
Symbol


1Symbol mark 2Anchor bracket
Use the anchor bracket located behind the rear seat on the
floor to attach the top strap.
Anchor brackets are installed for each rear seating position.
This symbol indicates the locations of anchor brackets.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
163
SV16163
TO USE THE CENTER ANCHOR BRACKET
1. Remove the cover of the center anchor bracket.
SV16162a

Center seat position 1Unlock
1. While pushing the knob, slide the knob, then release
the lock on both sides and remove the luggage cover.
2. Lower the head restraint.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
164
SV16111
3. Fix the child restraint system with the seat belt.
4. Latch the hook onto the anchor bracket and tighten the
top strap.
For instructions to install the child restraint system, see ºChild
restraint systemº on page 141.
CAUTION
Make sure the top strap is securely latched, and check
that the child restraint system is securely by pushing
and pulling it in different directions. Follow all the
installation instructions provided by its manufacturer.
SV16154a

1Lock
5. Replace the luggage cover and slide the knob while
pushing the knob, then securely lock the luggage cover.
03 07.09

OCCUPANT RESTRAINT SYSTEMS
165
SV16121

Side seat position
1. Remove the head restraint.
SV16161a

1Unlock
2. While pushing the knob, slide the knob, then release
the lock on both sides and remove the luggage cover.
SV16120
3. Fix the child restraint system with the seat belt.
4. Latch the hook onto the anchor bracket and tighten the
top strap.
03 07.09